NSN 5306-01-468-5280 MB1545D47, MB154-5D47, AIC6875D47
Product Details | CLOSE TOLERANCE BOLT
5306-01-468-5280 An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see BOLT, SHEAR. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see BOLT, MACHINE.
Part Alternates: MB1545D47, MB154-5D47, AIC6875D47, AIC687-5D47, S4065D47, S406-5D47, SLB7485D47, SLB748-5D47 , ST3M7445D47, ST3M744-5D47 , VCG00015D47, VCG0001-5D47, VS31745D47, VS3174-5D47, WC7445D47, WC744-5D47 , GS10155D47, GS1015-5D47 , PBF12655D47, PBF1265-5D47, 11823-5D47 , 1228955D47, 122895-5D47, 5306-01-468-5280, 01-468-5280, 5306014685280, 118235D47, 014685280
Hardware and Abrasives | Bolts
| Supply Group (FSG) | NSN Assign. | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 53 | 14 OCT 1999 | 01-468-5280 | 27851 ( BOLT, CLOSE TOLERANCE ) |
Drawings & Photos | NSN 5306-01-468-5280
Cross Reference | NSN 5306-01-468-5280
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 11823-5D47 | 59563 | REID PRODUCTS INC. DBA REID PRODUCTS |
| 122895-5D47 | 0PTK6 | SPS TECHNOLOGIES INC |
| 122895-5D47 | 56878 | SPS TECHNOLOGIES, LLC DBA AEROSPACE DIVISION |
| 122895-5D47 | 80539 | SPS TECHNOLOGIES, LLC DBA AEROSPACE FASTENERS GROUP |
| AIC687-5D47 | 06725 | SPS TECHNOLOGIES LLC DBA AIR INDUSTRIES |
| GS1015-5D47 | 1EM77 | B & B SPECIALTIES INC. DBA G S AEROSPACE DIVISION DIV GS |
| MB154-5D47 | 73197 | HI-SHEAR CORPORATION |
| PBF1265-5D47 | 27624 | SPS TECHNOLOGIES, LLC DBA PB FASTENERS |
| S406-5D47 | 97928 | HUCK INTL INC |
| SLB748-5D47 | 16258 | SPACELOK INC. |
| ST3M744-5D47 | 0ZC92 | HEARTLAND PRECISION FASTENERS, INC. |
| ST3M744-5D47 | 1VSL7 | HOUSTON PRECISION FASTENER L.L.C. |
| ST3M744-5D47 | 58998 | EMHART TEKNOLOGIES LLC DBA FASTENER INNOVATION TECHNOLOGY |
| ST3M744-5D47 | 76301 | BOEING COMPANY, THE DBA BOEING |
| VCG0001-5D47 | 06710 | VALLEY-TODECO, INC. |
| VS3174-5D47 | 06950 | ALCOA GLOBAL FASTENERS, INC. DBA ALCOA FASTENING SYSTEMS |
| VS3174-5D47 | 17446 | HUCK INTERNATIONAL, INC. DBA ALCOA FASTENING SYSTEMS |
| VS3174-5D47 | 5M902 | ALCOA GLOBAL FASTENERS, INC. DBA ALCOA FASTENING SYSTEMS |
| VS3174-5D47 | 92215 | ALCOA GLOBAL FASTENERS, INC. DBA ALCOA FASTENING SYSTEMS |
| WC744-5D47 | 60516 | WEST COAST AEROSPACE INC |
Request a Quote
What Our Customers Say
Thank you very much for the excellent service and professional customer care.
The service was excellent. I can think of no improvements to date that you can make regarding internet sales.
The representative for WBParts was efficient & handled our request in a timely & professional manner.
Tried two other sources, neither of them responded, was all done online, never spoke to anyone.
The response is quick and the price is often very good. We are completely satisfied.
Compare
Related Products | NSN 5306-01-468-5280
Technical Data | NSN 5306-01-468-5280
| Characteristic | Specifications |
|---|---|
| THREAD SERIES DESIGNATOR | UNJF |
| NOMINAL THREAD DIAMETER | 0.312 INCHES |
| THREAD QUANTITY PER INCH | 24 |
| THREAD CLASS | 3A |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD LENGTH | 0.375 INCHES NOMINAL |
| FASTENER LENGTH | 0.678 INCHES MINIMUM AND 0.698 INCHES MAXIMUM |
| MATERIAL | STEEL COMP XM-13 OVERALL |
| SURFACE TREATMENT | PASSIVATE OVERALL |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| MINIMUM TENSILE STRENGTH | 125000 POUNDS PER SQUARE INCH |
| HEAD STYLE | C12 SPLINE DRIVE SHEAR HEAD |
| HEAD HEIGHT | 0.187 INCHES NOMINAL |
| HEAD MINOR DIAMETER | 0.514 INCHES MINIMUM AND 0.521 INCHES MAXIMUM |
| GRIP LENGTH | 0.313 INCHES NOMINAL |
| GRIP DIAMETER | 0.484 INCHES MINIMUM AND 0.511 INCHES MAXIMUM |
| DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | 0.570 INCHES MINIMUM AND 0.580 INCHES MAXIMUM FIRST HOLE |
| SHANK UNTHREADED HOLE DIAMETER | 0.076 INCHES MINIMUM AND 0.081 INCHES MAXIMUM FIRST HOLE |
| III END ITEM IDENTIFICATION | USED ON F18 E&F |
| III PART NAME ASSIGNED BY CONTROLLING AGENCY | BOLT-CLOSE TOLERANCE, SPLINE DRIVE, CRES (125 KSI FSU) DRILED,SHORT THREAD |
Restrictions/Controls & Freight Information | NSN 5306-01-468-5280
| Category | Code | Description |
|---|---|---|
| Shelf-Life Code: | 0 | Nondeteriorative |
| Hazardous Material Indicator Code | N | There is no data in the HMIS and the NSN is in an FSC not generally suspected of containing hazardous materials |
| Demilitarization Code: | A | Non-Munitions List Item/ Non-Strategic List Item - Demilitarization not required. |
| Controlled Inventory Item Code: | U | UNCLASSIFIED |
| Precious Metals Indicator Code: | A | Item does not contain precious metal |
| Criticality Code: | X | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
| Automatic Data Processing Equipment: | 0 | Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9) |
| Category | Code | Description |
|---|---|---|
| NMF Description | 136500 | METAL NOI/METAL ALLOYS NOI |
| Less than car load rating | W | Rating Variable |
| Less than truck load rating | W | Rating Variable |
| Water commodity Code | 713 | unknown |
| Originating Activity Code | KE | Naval ICP Philadelphia, PA 19111 |
| Air Dimension Code | A | Shipment is not a consolidation and does not exceed 72 inches in any dimension. |
| Air Commodity | ||
| Air Special Handling | Z | No special handling required. |
| Special Handling Code | 9 | unknonwn |
| HAZMAT | ||
| Type of Cargo | Z | No special type of cargo code applicable |
Management | NSN 5306-01-468-5280
Navy| Category | Code | Description |
|---|---|---|
| Cognizance Codes | 9B | Navy-owned stocks of DLA material Naval Inventory Control Point, Mechanicsburg |
| Special Material ID | QE | FIGHTERAIRCRAFT-FIRST(F18 E/F) |
| Special Material Content | 9 | Non-Hazardous or Non-Sensitive Item, does not require hazardous or special handling, packaging or precautions |
| Source of Supply | SMS | Defense Logistics Agency Enterprise Business Systems |
| Agency | DN | Department of the Navy |
| Service Organization | N | U.S. Navy |
| Acquisition Advice Codes | Z | INSURANCE/NUMERIC STOCKAGE OBJECTIVE ITEM # Items which may be required occasionally or intermittently, and prudence requires that a nominal quantity of materiel be stocked due to the essentiality or the lead time of the item. 1. The item is centrally managed, stocked, and issued. 2. Requisitions will be submitted in accordance with IMM/Service requisitioning procedures. |
| Controlled Item Code | U | UNCLASSIFIED |
| Shelf Life Code | 0 | Nondeteriorative |