Product Details | VERTICAL MILLING MACHINE

3417-01-426-5465 00001013417000000

Part Alternates: SERIES II EZ-TRAK DX, SERIESIIEZTRAKDX, 3417-01-426-5465, 01-426-5465, 3417014265465, 014265465

Metalworking Machinery | Milling Machines

Supply Group (FSG) NSN Assign. NIIN
34 14 MAR 1996 01-426-5465

Cross Reference | NSN 3417-01-426-5465

Part Number Cage Code Manufacturer
SERIES II EZ-TRAK DX 08607 BRIDGEPORT MACHINES DIV OF TEXTRON INC

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 3417-01-426-5465

Technical Data | NSN 3417-01-426-5465

Characteristic Specifications
MOUNTING TYPE FLOOR
TABLE TYPE FIXED BED
LENGTH 58.000 INCHES NOMINAL
WIDTH 11.000 INCHES NOMINAL
TABLE LONGITUDINAL TRAVEL 30.000 INCHES NOMINAL
TABLE CROSS TRAVEL 15.000 INCHES NOMINAL
SPINDLE TYPE FIXED
MAXIMUM DISTANCE FROM SPINDLE NOSE TO WORKING SURFACE 1.000 INCHES
POWER SOURCE ELECTRIC MOTOR
ELECTRIC MOTOR HORSEPOWER RATING 3.000
CURRENT TYPE AC
VOLTAGE IN VOLTS 230.0
CURRENT RATING IN AMPS 60.0
PHASE THREE
FURNISHED ITEMS AND QUANTITY TY-2 SERIES II EZ-TRAK DX WITH 58IN TABLE, 230V/3/60; TY-3-3 ERICKSON NO.30 QUICK-CHANGE;TY-4-Y ACCU-LUBE COOLANT SYSTEM; TY-6-2 COOLANT/CHIP FLOOR PAN AND SPLASH-BACK WITH PUMP AND NOZZLE; TY-8-1 LEFT HAND WORKLIGHT;12570578 POWER DRAWBAR KIT FOR ERICKSON NO. 30 Q/C TOOLING;11570551 H-10 ERICKSON NO. 30 Q/C TOOLING KIT;11150117 FULL TABLE CHIP AND COOLANT SHEILD (58IN); 11680000 KURT PLAIN D-60 VISE AND 11062028 NAMEPLATE WITH THE FOLLOWING INFORMATION:MODEL NO., S/N, HORSEPOWER, VOLTAGE, CONTRACT NO. ,NSN, AND DATE OF MANUFACTURE
SPECIAL FEATURES BRIGDGEPORT MANUFACTURED 2 TRAX DX CONTROL. 32 BIT TECHNOLOGY, SIMULTANEOUS 2-AXIS LINEAR OR CIRCULAR INTERPOLATION FOR MACHINING ARCS AND DIAGONALS;1,000 EVENTS OF PROGRAM STORAGE WITH DISPLAY;ENGLISH/METRIC CONVERSION; CONVERSATIONAL DISPLAY THAT PROMPTS FOR ALL PROGRAM DATA AND ALSO SIGNALS THE OPERATOR WHEN ACTION IS REQUIRED; ABSOLUTE AND INCREMENTAL PROGRAMMING OR A COMBINATION FOR EASY INPUT OF DIMENSIONS DIRECTLY FROM A BLUEPRINT;POWERFUL CANNED MILLING AND DRILLING CYCLES FOR MACHINING CIRCULAR POCKETS, RECTANGULAR POCKETS, FRAME MILLING, SLOTS BOLT HOLE PATTERNS;AUTOMATIC CORNER ROUNDING FOR INSIDE AND OUTSIDE CORNERS;CUTTER DIAMETER COMPENSATION;FULL 3-AXIS DRO FOR MANUAL OOPERATION; REMOTE STOP/START CONTROL DEVICE; 270 MB HARD DISK DRIVE (MIN), 1.44MB HD FLOPPY DISK DRIVE; RS-233C SERIAL COMMUNICATIONS PORT

Restrictions/Controls & Freight Information | NSN 3417-01-426-5465

Category Code Description
Shelf-Life Code:0Nondeteriorative
Hazardous Material Indicator CodeNThere is no data in the HMIS and the NSN is in an FSC not generally suspected of containing hazardous materials
Demilitarization Code:ANon-Munitions List Item/ Non-Strategic List Item - Demilitarization not required.
Controlled Inventory Item Code:UUNCLASSIFIED
Precious Metals Indicator Code:AItem does not contain precious metal
Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Automatic Data Processing Equipment:0Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9)
Category Code Description
NMF Description 133300 MACHINERY/MACHINES NOI
Less than car load rating
Less than truck load rating W Rating Variable
Water commodity Code 72E unknown
Originating Activity Code CX Defense Supply Center Richmond
Richmond, VA 23297-5000
Air Dimension Code A Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Air Commodity V Vehicles, machinery, shop and warehouse equipment and supplies, including special tools and equipment, ground servicing and special purpose vehicles, marine equipment and supplies, repair and maintenance parts for the above.
Air Special Handling Z No special handling required.
Special Handling Code 9 unknonwn
HAZMAT
Type of Cargo Z No special type of cargo code applicable

Management | NSN 3417-01-426-5465

Category Code Description
Budget Code9 General Support DIV57X4921.070:Air Force decentrally managed expense items (ERRC XB3, XF-3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors.
Price ValidationN The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
  • The price has not been analyzed or reviewed for accuracy.
  • ZOP or Standard price challenges are permissible, but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of ?L? or?F?,the case must be evaluated locally where purchased or fabricated.
Fund CodeSFStock fund applicable to items managed for the Air Force by the respective Inventory Control Point.
Source of SupplySMSDefense Logistics Agency
Enterprise Business Systems
AgencyDFDepartment of the Air Force
Service OrganizationFU.S. Air Force
ReparabilityUAF Equipment Management System (AFEMS)
Acquisition Advice CodesXSEMIACTIVE ITEM-NO REPLACEMENT (NON-STOCKED ITEMS) A potentially inactive NSN which must be retained in the supply system as an item of supply because (1) stocks of the item are on hand or in use below the wholesale level and (2) the NSN is cited in equipment authorization documents TO & E, TA, TM, etc., or in-use assets are being reported. 1. Items are authorized for central procurement but not authorized for stockage at wholesale level. 2. Requisitions for in-use replacement will be authorized in accordance with individual Military Service directives. 3. Requisitions may be submitted as requirements generate. Repetitive demands may dictate an AAC change to permit wholesale stockage.
Controlled Item CodeUUNCLASSIFIED
Shelf Life Code0Nondeteriorative
Purchasing QTY
UOM
1
EA : Each