Product Details | TURBINE ENGINE TURBINE SHROUD SEGMENT

2840-01-347-0710 A stationary arched metal segment used to establish clearance and a seal for the tip of a BLADE, TURBINE ROTOR, AIRCRAFT GAS TURBINE ENGINE. The inner dimension may have open honeycomb or composition filled surface or may be formed by the knife edge metal protrusions of a SEAL RING, LABYRINTH, AIRCRAFT GAS TURBINE ENGINE.

Part Alternates: 11741201, 11741-201, 2840-01-347-0710, 01-347-0710, 2840013470710, 013470710

Engines, Turbines, and Components | Gas Turbines and Jet Engines, Aircraft, Prime Moving; and Components

Supply Group (FSG) NSN Assign. NIIN
28 14 OCT 1991 01-347-0710

Cross Reference | NSN 2840-01-347-0710

Part Number Cage Code Manufacturer
11741-201 12536 AMETEK THERMAL SYSTEMS INC DBA AMETEK HUGHES-TREITLER

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 2840-01-347-0710

Technical Data | NSN 2840-01-347-0710

Characteristic Specifications
III END ITEM IDENTIFICATION 2840-01-325-9222 NOZZLE ASSY,F110-GE-400 ENGINE
MANUFACTURERS CODE 12536
DESIGN CONTROL REFERENCE 11741-201

Restrictions/Controls & Freight Information | NSN 2840-01-347-0710

Category Code Description
Hazardous Material Indicator CodeNThere is no data in the HMIS and the NSN is in an FSC not generally suspected of containing hazardous materials
Demilitarization Code:DMunitions List Item or Commerce Control List Item. Demilitarization required. Total destruction of the item and components so as to preclude restoration or repair to a usable condition by melting, cutting, tearing, scratching, crushing, breaking, punching, neutralizing, etc. (As an alternate, burial or deep water dumping may be used when coordinated with the DoD Demilitarization Program Office.)
Precious Metals Indicator Code:AItem does not contain precious metal
Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Automatic Data Processing Equipment:0Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9)
Category Code Description
NMF Description 118150 CONES/BELLS ETC AIR INLET SUB7
Less than car load rating Q 70
Less than truck load rating Q 70.0
Water commodity Code 593 unknown
Originating Activity Code KE Naval ICP
Philadelphia, PA 19111
Air Dimension Code A Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Air Commodity
Air Special Handling Z No special handling required.
Special Handling Code 9 unknonwn
HAZMAT
Type of Cargo Z No special type of cargo code applicable

Management | NSN 2840-01-347-0710

Category Code Description
Cognizance Codes7RAeronautical Depot Level Repairable Spares
Naval Inventory Control Point, Philadelphia
Special Material IDXNJET ENGINE(F110-GE-400)
Issue Repair, or RequisitionARRepairable item subject to centrally managed rework program at designated sites. Mandatory turn-in of item required except when initial issue or replacement of surveyed item is involved.
Special Material Content9 Non-Hazardous or Non-Sensitive Item, does not require hazardous or special handling, packaging or precautions
Source of SupplyN32Naval Inventory Control Point
Philadelphia, PA 19111-5098
AgencyDNDepartment of the Navy
Service OrganizationLLead Service - 22 (Repairable)
ReparabilityHDepot Level Reparable
Acquisition Advice CodesVTERMINAL ITEM # Identifies items in stock, but future procurement is not authorized. Requisitions may continue to be submitted until stocks are exhausted. Preferred item National Stock Number is normally provided by application of the phrase: When Exhausted Use (NSN). Requisitions will be submitted in accordance with IMM/Service requisitioning procedures as applicable.
Controlled Item CodeIAIRCRAFT ENGINE EQUIPMENT AND PARTS
Shelf Life Code0Nondeteriorative
Purchasing QTY
UOM
1
EA : Each