NSN 2520-00-752-1326 7521326, 00-752-1326, 007521326
Product Details | AUTOMOTIVE AXLE SHAFT
2520-00-752-1326 A shaft which is a component of AXLE ASSEMBLY, AUTOMOTIVE, DRIVING, used to transmit rotary motion from the differential assembly either directly or indirectly to the wheel hubs. Excludes shafts with a universal joint or a component of a universal joint attached to it.
Part Alternates: 7521326, 2520-00-752-1326, 00-752-1326, 2520007521326, 007521326
Vehicular Equipment Components | Vehicular Power Transmission Components
Supply Group (FSG) | NSN Assign. | NIIN | Item Name Code (INC) |
---|---|---|---|
25 | 01 JAN 1962 | 00-752-1326 | 10852 ( SHAFT, AXLE, AUTOMOTIVE ) |
Cross Reference | NSN 2520-00-752-1326
Part Number | Cage Code | Manufacturer |
---|---|---|
7521326 | 19207 | U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM |
Request a Quote
What Our Customers Say
Compare
NSNs for Compare ( up to 4 ): Add 2520-00-752-1326
Related Products | NSN 2520-00-752-1326
Technical Data | NSN 2520-00-752-1326
Characteristic | Specifications |
---|---|
MATERIAL | STEEL, MIL-S-13048, FS8660-CANCELED |
METALLIC HARDNESS RATING | 49.0 MINIMUM ROCKWELL C AND 55.0 MAXIMUM ROCKWELL C |
OVERALL LENGTH | 54.562 INCHES MINIMUM AND 54.688 INCHES MAXIMUM |
FIRST END TYPE | FLANGED |
FLANGE OVERALL THICKNESS | 1.313 INCHES NOMINAL |
FLANGE THICKNESS AT MOUNTING HOLE | 0.438 INCHES NOMINAL |
FLANGE OUTSIDE DIAMETER | 6.390 INCHES MINIMUM AND 6.395 INCHES MAXIMUM |
MOUNTING FACILITY TYPE AND QUANTITY | 8 TAPERED HOLE AND 2 THREADED HOLE |
THREAD SIZE | 7/16-14 |
SCREW THREAD SERIES DESIGNATOR | UNF |
THREAD DIRECTION | RIGHT-HAND |
TAPER MAJOR DIAMETER | 0.720 INCHES NOMINAL |
FLANGE HOLE TAPER | 7.000 INCHES NOMINAL PER FOOT |
FIRST END BEARING SEAT | NOT INCLUDED |
SECOND END TYPE | SPLINED |
SECOND END SPLINE TYPE | INVOLUTE |
SECOND END SPLINE QUANTITY | 16 |
SECOND END SPLINE PRESSURE ANGLE IN DEG | 14.500 |
SECOND END PITCH DIAMETER | 1.643 INCHES NOMINAL |
SECOND END SPLINE LENGTH | 2.625 INCHES NOMINAL |
SECOND END BEARING SEAT | NOT INCLUDED |
MANUFACTURERS CODE | 19207 |
DESIGN CONTROL REFERENCE | 7521326 |
Restrictions/Controls & Freight Information | NSN 2520-00-752-1326
Category | Code | Description |
---|---|---|
Hazardous Material Indicator Code | P | There is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product |
Demilitarization Code: | B | Munitions List Item - Mutilation (MUT) to the point of scrap required. (Formerly: Demilitarization not required. Trade Security Controls (TSCs) required at disposition.) |
Precious Metals Indicator Code: | U | Precious metal type is unknown |
Criticality Code: | X | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
Category | Code | Description |
---|---|---|
NMF Description | 017900 | AUTO AXLE SHAFTS |
Less than car load rating | S | 60 |
Less than truck load rating | S | 60.0 |
Water commodity Code | 581 | unknown |
Originating Activity Code | XX | |
Air Dimension Code | A | Shipment is not a consolidation and does not exceed 72 inches in any dimension. |
Air Commodity | V | Vehicles, machinery, shop and warehouse equipment and supplies, including special tools and equipment, ground servicing and special purpose vehicles, marine equipment and supplies, repair and maintenance parts for the above. |
Air Special Handling | Z | No special handling required. |
Special Handling Code | 9 | unknonwn |
HAZMAT | ||
Type of Cargo | Z | No special type of cargo code applicable |