NSN 2520-00-433-2202 25597914, 2559791-4, 00-433-2202
Product Details | AUTOMOTIVE AXLE SHAFT
2520-00-433-2202 A shaft which is a component of AXLE ASSEMBLY, AUTOMOTIVE, DRIVING, used to transmit rotary motion from the differential assembly either directly or indirectly to the wheel hubs. Excludes shafts with a universal joint or a component of a universal joint attached to it.
Part Alternates: 25597914, 2559791-4, 2520-00-433-2202, 00-433-2202, 2520004332202, 004332202
Vehicular Equipment Components | Vehicular Power Transmission Components
Supply Group (FSG) | NSN Assign. | NIIN | Item Name Code (INC) |
---|---|---|---|
25 | 30 JUL 1970 | 00-433-2202 | 10852 ( SHAFT, AXLE, AUTOMOTIVE ) |
Request a Quote
What Our Customers Say
Compare
NSNs for Compare ( up to 4 ): Add 2520-00-433-2202
Related Products | NSN 2520-00-433-2202
Technical Data | NSN 2520-00-433-2202
Characteristic | Specifications |
---|---|
MATERIAL | STEEL, QQ-S-624, FS4340-CANCELED |
METALLIC HARDNESS RATING | 41.0 NOMINAL ROCKWELL C |
OVERALL LENGTH | 12.781 INCHES NOMINAL |
FIRST END TYPE | SPLINED |
FIRST END SPLINE TYPE | STRAIGHT |
FIRST END SPLINE QUANTITY | 6 |
FIRST END SPLINE LENGTH | 1.619 INCHES NOMINAL |
FIRST END SPLINE MAJOR DIAMETER | 1.490 INCHES MINIMUM AND 1.495 INCHES MAXIMUM |
FIRST END SPLINE MINOR DIAMETER | 1.255 INCHES MINIMUM AND 1.270 INCHES MAXIMUM |
FIRST END ENGAGING/LOCKING/POSITIONING FACILITY | LOCKING DEVICE GROOVE |
FIRST END FACILITY WIDTH | 0.120 INCHES NOMINAL |
FIRST END FACILITY DIAMETER | 1.030 INCHES NOMINAL |
FIRST END FACILITY LOCATION | 0.220 IN. FROM SHAFT END |
FIRST END BEARING SEAT | NOT INCLUDED |
SECOND END TYPE | SPLINED |
SECOND END SPLINE TYPE | INVOLUTE |
SECOND END SPLINE QUANTITY | 16 |
SECOND END SPLINE PRESSURE ANGLE IN DEG | 30.0 |
SECOND END PITCH DIAMETER | 1.188 INCHES NOMINAL |
SECOND END SPLINE LENGTH | 1.750 INCHES NOMINAL |
SECOND END BEARING SEAT | INCLUDED |
SECOND END BEARING SEAT DIAMETER | 1.312 INCHES NOMINAL |
SECOND END BEARING SEAT WIDTH | 1.125 INCHES NOMINAL |
SECOND END DISTANCE FROM BEARING SEAT TO END | 2.750 INCHES NOMINAL |
Restrictions/Controls & Freight Information | NSN 2520-00-433-2202
Category | Code | Description |
---|---|---|
Shelf-Life Code: | 0 | Nondeteriorative |
Hazardous Material Indicator Code | P | There is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product |
Demilitarization Code: | A | Non-Munitions List Item/ Non-Strategic List Item - Demilitarization not required. |
Controlled Inventory Item Code: | U | UNCLASSIFIED |
Precious Metals Indicator Code: | U | Precious metal type is unknown |
Criticality Code: | X | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
Category | Code | Description |
---|---|---|
NMF Description | 017900 | AUTO AXLE SHAFTS |
Less than car load rating | ||
Less than truck load rating | S | 60.0 |
Water commodity Code | 586 | unknown |
Originating Activity Code | AX | Defense Supply Center Columbus Columbus, OH 43216-5000 |
Air Dimension Code | A | Shipment is not a consolidation and does not exceed 72 inches in any dimension. |
Air Commodity | V | Vehicles, machinery, shop and warehouse equipment and supplies, including special tools and equipment, ground servicing and special purpose vehicles, marine equipment and supplies, repair and maintenance parts for the above. |
Air Special Handling | Z | No special handling required. |
Special Handling Code | 9 | unknonwn |
HAZMAT | ||
Type of Cargo | Z | No special type of cargo code applicable |
Management | NSN 2520-00-433-2202
Category | Code | Description |
---|---|---|
Cognizance Codes | 9B | Navy-owned stocks of DLA material Naval Inventory Control Point, Mechanicsburg |
Source of Supply | SMS | Defense Logistics Agency Enterprise Business Systems |
Agency | DN | Department of the Navy |
Service Organization | N | U.S. Navy |
Acquisition Advice Codes | V | TERMINAL ITEM # Identifies items in stock, but future procurement is not authorized. Requisitions may continue to be submitted until stocks are exhausted. Preferred item National Stock Number is normally provided by application of the phrase: When Exhausted Use (NSN). Requisitions will be submitted in accordance with IMM/Service requisitioning procedures as applicable. |
Controlled Item Code | U | UNCLASSIFIED |
Shelf Life Code | 0 | Nondeteriorative |
Purchasing | QTY UOM |
Z EA : Each |