Product Details | AIRCRAFT ACCESS COVER

1560-01-220-8906 An access cover which is an integral part of the airframe structure of an aircraft. Excludes COVER, ACCESS.

Part Alternates: 7621962-10, 1560-01-220-8906, 01-220-8906, 1560012208906, 762196210, 012208906

Aircraft and Airframe Structural Components | Airframe Structural Components

Supply Group (FSG) NSN Assign. NIIN
15 21 NOV 1985 01-220-8906

Drawings & Photos | NSN 1560-01-220-8906


Cross Reference | NSN 1560-01-220-8906

Part Number Cage Code Manufacturer
7621962-10 98752 WARNER ROBINS AIR LOGISTICS CENTER

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 1560-01-220-8906

Technical Data | NSN 1560-01-220-8906

Characteristic Specifications
PERIPHERAL SHAPE STYLE 28 RECTANGLE, MULTI HOLES
WIDTH 16.100 INCHES NOMINAL
LENGTH 25.630 INCHES NOMINAL
DISTANCE BETWEEN HOLE CENTERLINE AND FIRST HOLE ALONG LENGTH 2.500 INCHES NOMINAL
DISTANCE FROM FIRST HOLE CENTERLINE TO END ALONG LENGTH 8.100 INCHES NOMINAL
DISTANCE BETWEEN HOLES ALONG WIDTH 1.560 INCHES NOMINAL
HOLE QUANTITY ALONG LENGTH 2
HOLE QUANTITY ALONG WIDTH 4
CORNER RADIUS 1.500 INCHES NOMINAL
CROSS-SECTIONAL SHAPE STYLE 22 SQUARE OR RECTANGULAR RECESS
INSIDE WIDTH 12.900 INCHES NOMINAL
INSIDE LENGTH 22.430 INCHES NOMINAL
SECOND RECESS INSIDE HEIGHT 3.000 INCHES NOMINAL
BODY OUTSIDE RADIUS 0.750 INCHES NOMINAL
MATERIAL PLASTIC
MATERIAL DOCUMENT AND CLASSIFICATION MIL-P-2542 MIL SPEC SINGLE MATERIAL RESPONSE
END ITEM IDENTIFICATION AC-130H ACFT
MANUFACTURERS CODE 98752
DESIGN CONTROL REFERENCE 7621962-10

Restrictions/Controls & Freight Information | NSN 1560-01-220-8906

Category Code Description
Shelf-Life Code:0Nondeteriorative
Hazardous Material Indicator CodePThere is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product
Demilitarization Code:BMunitions List Item - Mutilation (MUT) to the point of scrap required. (Formerly: Demilitarization not required. Trade Security Controls (TSCs) required at disposition.)
Controlled Inventory Item Code:UUNCLASSIFIED
Precious Metals Indicator Code:AItem does not contain precious metal
Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Automatic Data Processing Equipment:0Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9)
Category Code Description
No Freight Information

Management | NSN 1560-01-220-8906

Category Code Description
Budget Code9 General Support DIV57X4921.070:Air Force decentrally managed expense items (ERRC XB3, XF-3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors.
Materiel Management Aggregation CodeLGTG:C-130 HERCULES
Price ValidationN The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
  • The price has not been analyzed or reviewed for accuracy.
  • ZOP or Standard price challenges are permissible, but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of ?L? or?F?,the case must be evaluated locally where purchased or fabricated.
Source of SupplyFLZWarner Robins Air Logistics Center
Robins AFB, GA 31098-5609
AgencyDFDepartment of the Air Force
Service OrganizationFU.S. Air Force
ReparabilityNStock Fund (except Munitions)
Acquisition Advice CodesFFABRICATE OR ASSEMBLE # (NON-STOCKED ITEMS) National Stock Numbered items fabricated or assembled from raw materials and finished products as the normal method of support. Procurement and stockage of the items are not justified because of low usage or peculiar installation factors. Distinctions between local or centralized fabricate/assemble capability are identified by the Source of Supply Modifier in the Source of Supply Column of the Service Management Data Lists.
Controlled Item CodeUUNCLASSIFIED
Shelf Life Code0Nondeteriorative
Purchasing QTY
UOM
1
EA : Each