Product Details | WIPER RING

1560-01-166-6766 A circular, single or multipiece, rigid, metallic or nonmetallic item having a centrally located hole with a sharp edge on the inside periphery. It is supplied in various cross-sectional shapes and is designed to be installed in a cylinder, shock strut, or similar device to remove excess oil, dirt, ice, and/or foreign material from a piston, ram, or sliding rod. Excludes PACKING, PREFORMED; RING, PISTON; and SEAL RING, METAL.

Part Alternates: 011666766

Aircraft and Airframe Structural Components | Airframe Structural Components

Supply Group (FSG) NSN Assign. NIIN
15 01-166-6766

Drawings & Photos | NSN 1560-01-166-6766


Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 1560-01-166-6766

Technical Data | NSN 1560-01-166-6766

Characteristic Specifications
MATERIAL PLASTIC POLYTETRAFLUOROETHYLENE OVERALL
CROSS-SECTIONAL SHAPE STYLE B6 OUTSIDE GROOVED, STRAIGHT FACE
JOINT STYLE 2 DIAGONAL JOINT
RING STYLE 7 CONCENTRIC
INSIDE DIAMETER 0.491 INCHES MINIMUM AND 0.496 INCHES MAXIMUM
OUTSIDE DIAMETER 0.735 INCHES MINIMUM AND 0.740 INCHES MAXIMUM
MATERIAL THICKNESS 0.125 INCHES NOMINAL
OUTER EDGE THICKNESS 0.084 INCHES MINIMUM AND 0.094 INCHES MAXIMUM
MANUFACTURERS CODE 96906
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE MS28903-1T

Restrictions/Controls & Freight Information | NSN 1560-01-166-6766

Category Code Description
Hazardous Material Indicator CodePThere is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product
Controlled Inventory Item Code:UUNCLASSIFIED
Category Code Description
No Freight Information