Product Details | AIRCRAFT STRUCTURAL PANEL

1560-00-333-6833 A preformed item of various shapes, and contours, which may have a sandwich or honeycomb core bonded to a metallic or nonmetallic facing material. It is used to enclose integral portions of the fuselage or to form partitions or sections within a wing, empennage, fuselage, nacelle or crew compartment. It may have mounting provisions such as predrilled holes to facilitate installation, but will have no items attached to it except bracket (s) or other securing devices to accommodate its own mounting or support. It may be mounted by means of fasteners, bonding or welding. Excludes PANEL, INTERIOR LINING, AIRCRAFT; COVER ACCESS; COVER, ACCESS, AIRCRAFT; FLOOR (1), AIRCRAFT; CORE MATERIAL, CELLULAR, STRUCTURAL.

Part Alternates: 87990, 1560-00-333-6833, 00-333-6833, 1560003336833, 003336833

Aircraft and Airframe Structural Components | Airframe Structural Components

Supply Group (FSG) NSN Assign. NIIN
15 01 JAN 1963 00-333-6833

Cross Reference | NSN 1560-00-333-6833

Part Number Cage Code Manufacturer
87990 26512 NORTHROP GRUMMAN SYSTEMS CORPORATION DIV NORTHROP GRUMMAN AEROSPACE

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 1560-00-333-6833

Technical Data | NSN 1560-00-333-6833

Characteristic Specifications
MATERIAL STEEL COMP 4130
MATERIAL DOCUMENT AND CLASSIFICATION MIL-S-18729 MIL SPEC SINGLE MATERIAL RESPONSE
AIRCRAFT MISSION DESIGN SERIES HU-16
OVERALL LENGTH 6.000 INCHES NOMINAL
OVERALL WIDTH 0.500 INCHES NOMINAL
THICKNESS 0.188 INCHES NOMINAL
SPECIAL FEATURES U/A: SLIDING WINDOW LOCK PLATE; MATL: TWO 0.166IN DIA MTG HOLES SPACED 3.00IN C TO C, WITH THREE POSITIONING SLOTS
MANUFACTURERS CODE 26512
DESIGN CONTROL REFERENCE 87990

Restrictions/Controls & Freight Information | NSN 1560-00-333-6833

Category Code Description
Hazardous Material Indicator CodePThere is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product
Demilitarization Code:BMunitions List Item - Mutilation (MUT) to the point of scrap required. (Formerly: Demilitarization not required. Trade Security Controls (TSCs) required at disposition.)
Precious Metals Indicator Code:UPrecious metal type is unknown
Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Automatic Data Processing Equipment:0Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9)
Category Code Description
NMF Description 106280 PLATES STRUCTURAL I/S NOI
Less than car load rating U 50
Less than truck load rating U 50.0
Water commodity Code 571 unknown
Originating Activity Code XX
Air Dimension Code A Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Air Commodity
Air Special Handling Z No special handling required.
Special Handling Code Z unknonwn
HAZMAT
Type of Cargo Z No special type of cargo code applicable