Product Details | NONMETALLIC ANGLE

9390-01-285-9621 A structural shape fabricated from nonmetallic material(s) resembling the letter "L" in cross-sectional form. It may have a reinforcing agent(s) and backing. Excludes SEAL, NONMETALLIC ANGLE.

Part Alternates: 1M2517, 1M-2517, 9390-01-285-9621, 01-285-9621, 9390012859621, 012859621

Nonmetallic Fabricated Materials | Miscellaneous Fabricated Nonmetallic Materials

Supply Group (FSG) NSN Assign. NIIN
93 23 SEP 1988 01-285-9621

Cross Reference | NSN 9390-01-285-9621

Part Number Cage Code Manufacturer
1M-2517 29321 TRANSTAR METALS CORP
1M-2517 76301 BOEING COMPANY, THE DBA BOEING

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 9390-01-285-9621

Technical Data | NSN 9390-01-285-9621

Characteristic Specifications
CROSS-SECTIONAL SHAPE STYLE A5E5
OVERALL HEIGHT 1.700 INCHES NOMINAL
OVERALL WIDTH 2.800 INCHES NOMINAL
RIGHT FLANGE INNER SIDE RADIUS AT TOE 0.032 INCHES NOMINAL
RIGHT FLANGE OUTER SIDE RADIUS AT TOE 0.032 INCHES NOMINAL
LEFT SIDE FLANGE THICKNESS 0.125 INCHES NOMINAL
LEFT SIDE FLANGE TOP OUTER RADIUS 0.032 INCHES NOMINAL
LEFT SIDE FLANGE TOP INNER RADIUS 0.032 INCHES NOMINAL
FILLET RADIUS WHERE LEFT FLANGE JOINS BASE FLANGE 0.250 INCHES NOMINAL
OUTER RADIUS WHERE LEFT FLANGE JOINS BASE FLANGE 0.032 INCHES NOMINAL
BASE FLANGE THICKNESS 0.125 INCHES NOMINAL
LENGTH ANY ACCEPTABLE
MATERIAL SILICONE RUBBER,AMS 3207
NONMETALLIC HARDNESS RATING 30.0 NOMINAL SHORE DUROMETER A
MINIMUM TENSILE STRENGTH 500 POUNDS PER SQUARE INCH
TEMP RATING NOT RATED
ENVIRONMENTAL PROTECTION CORROSION AND OIL RESISTANT AND LOW TEMPERATURE AND HEAT, DRY AND WEATHER RESISTANT
MANUFACTURERS CODE 76301
DESIGN CONTROL REFERENCE 1M-2517

Restrictions/Controls & Freight Information | NSN 9390-01-285-9621

Category Code Description
Shelf-Life Code:0Nondeteriorative
Hazardous Material Indicator CodePThere is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product
Demilitarization Code:ANon-Munitions List Item/ Non-Strategic List Item - Demilitarization not required.
Controlled Inventory Item Code:UUNCLASSIFIED
Precious Metals Indicator Code:AItem does not contain precious metal
Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Category Code Description
No Freight Information

Management | NSN 9390-01-285-9621

Category Code Description
Budget Code9 General Support DIV57X4921.070:Air Force decentrally managed expense items (ERRC XB3, XF-3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors.
Price ValidationN The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
  • The price has not been analyzed or reviewed for accuracy.
  • ZOP or Standard price challenges are permissible, but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of ?L? or?F?,the case must be evaluated locally where purchased or fabricated.
Fund CodeSFStock fund applicable to items managed for the Air Force by the respective Inventory Control Point.
Source of SupplySMSDefense Logistics Agency
Enterprise Business Systems
AgencyDFDepartment of the Air Force
Service OrganizationFU.S. Air Force
ReparabilityNStock Fund (except Munitions)
Acquisition Advice CodesJNOT STOCKED, CENTRALLY PROCURED # (NON-STOCKED ITEMS) IMM/Service centrally managed but not stocked item. Procurement will be initiated only after receipt of a requisition.
Controlled Item CodeUUNCLASSIFIED
Shelf Life Code0Nondeteriorative
Purchasing QTY
UOM
1
FT : Foot