Product Details | NONMETALLIC CHANNEL

9390-00-140-7567 A structural shape fabricated from nonmetallic material(s) having two vertical flanges that extend in the same direction from each end of a horizontal base. The vertical flanges may have various type tips and additional flanges which extend on the same plane as the base. It may have a reinforcing agent(s) and backing Excludes SEAL, NONMETALLIC CHANNEL.

Part Alternates: LS9914, LS991-4, 9390-00-140-7567, 00-140-7567, 9390001407567, 001407567

Nonmetallic Fabricated Materials | Miscellaneous Fabricated Nonmetallic Materials

Supply Group (FSG) NSN Assign. NIIN
93 10 SEP 1971 00-140-7567

Cross Reference | NSN 9390-00-140-7567

Part Number Cage Code Manufacturer
LS991-4 98897 LOCKHEED MARTIN CORPORATION DBA LOCKHEED MARTIN AERONAUTICS

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 9390-00-140-7567

Technical Data | NSN 9390-00-140-7567

Characteristic Specifications
CROSS-SECTIONAL SHAPE STYLE B3A1
OVERALL HEIGHT 0.400 INCHES NOMINAL
OVERALL WIDTH 0.160 INCHES NOMINAL
RIGHT SIDE FLANGE HEIGHT 0.400 INCHES NOMINAL
LEFT SIDE FLANGE THICKNESS 0.060 INCHES NOMINAL
RIGHT SIDE FLANGE THICKNESS 0.060 INCHES NOMINAL
OUTER RADIUS WHERE LEFT FLANGE JOINS BASE FLANGE 0.080 INCHES NOMINAL
BASE FLANGE THICKNESS 0.0125 INCHES NOMINAL
OUTER RADIUS WHERE RIGHT FLANGE JOINS BASE FLANGE 0.080 INCHES NOMINAL
LENGTH ANY ACCEPTABLE
MATERIAL RUBBER, LAC 23-925, 45 SHORE, LOCKHEED AIRCRAFT CORP
NONMETALLIC HARDNESS RATING 40.0 MINIMUM SHORE DUROMETER A AND 50.0 MAXIMUM SHORE DUROMETER A
MINIMUM TENSILE STRENGTH 850 POUNDS PER SQUARE INCH
TEMP RATING -85.0 DEG FAHRENHEIT AND 500.0 DEG FAHRENHEIT
ENVIRONMENTAL PROTECTION OIL RESISTANT AND LOW TEMPERATURE AND HIGH TEMPERATURE
MANUFACTURERS CODE 98897
DESIGN CONTROL REFERENCE LS991-4

Restrictions/Controls & Freight Information | NSN 9390-00-140-7567

Category Code Description
Shelf-Life Code:0Nondeteriorative
Hazardous Material Indicator CodePThere is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product
Demilitarization Code:ANon-Munitions List Item/ Non-Strategic List Item - Demilitarization not required.
Controlled Inventory Item Code:UUNCLASSIFIED
Precious Metals Indicator Code:UPrecious metal type is unknown
Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Category Code Description
NMF Description 156600 PLASTIC/RUBBER ARTICLE VIZ:
Less than car load rating
Less than truck load rating W Rating Variable
Water commodity Code 846 unknown
Originating Activity Code CX Defense Supply Center Richmond
Richmond, VA 23297-5000
Air Dimension Code A Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Air Commodity B Construction materials: Includes paint and related materials, prefabricated building, wood products, metal and composition materials and their products, commercial hardware and miscellaneous items, cement, asphalt, building maintenance materials.
Air Special Handling Z No special handling required.
Special Handling Code 9 unknonwn
HAZMAT
Type of Cargo Z No special type of cargo code applicable

Management | NSN 9390-00-140-7567

Category Code Description
Budget Code9 General Support DIV57X4921.070:Air Force decentrally managed expense items (ERRC XB3, XF-3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors.
Price ValidationN The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
  • The price has not been analyzed or reviewed for accuracy.
  • ZOP or Standard price challenges are permissible, but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of ?L? or?F?,the case must be evaluated locally where purchased or fabricated.
Fund CodeSFStock fund applicable to items managed for the Air Force by the respective Inventory Control Point.
Source of SupplySMSDefense Logistics Agency
Enterprise Business Systems
AgencyDFDepartment of the Air Force
Service OrganizationFU.S. Air Force
ReparabilityNStock Fund (except Munitions)
Acquisition Advice CodesZINSURANCE/NUMERIC STOCKAGE OBJECTIVE ITEM # Items which may be required occasionally or intermittently, and prudence requires that a nominal quantity of materiel be stocked due to the essentiality or the lead time of the item. 1. The item is centrally managed, stocked, and issued. 2. Requisitions will be submitted in accordance with IMM/Service requisitioning procedures.
Controlled Item CodeUUNCLASSIFIED
Shelf Life Code0Nondeteriorative
Category Code Description
Cognizance Codes9BNavy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Source of SupplySMSDefense Logistics Agency
Enterprise Business Systems
AgencyDNDepartment of the Navy
Service OrganizationNU.S. Navy
Acquisition Advice CodesZINSURANCE/NUMERIC STOCKAGE OBJECTIVE ITEM # Items which may be required occasionally or intermittently, and prudence requires that a nominal quantity of materiel be stocked due to the essentiality or the lead time of the item. 1. The item is centrally managed, stocked, and issued. 2. Requisitions will be submitted in accordance with IMM/Service requisitioning procedures.
Controlled Item CodeUUNCLASSIFIED
Shelf Life Code0Nondeteriorative