Product Details | NONMETALLIC CHANNEL

9390-00-089-0578 A structural shape fabricated from nonmetallic material(s) having two vertical flanges that extend in the same direction from each end of a horizontal base. The vertical flanges may have various type tips and additional flanges which extend on the same plane as the base. It may have a reinforcing agent(s) and backing Excludes SEAL, NONMETALLIC CHANNEL.

Part Alternates: 693845, 9390-00-089-0578, 00-089-0578, 9390000890578, 000890578

Nonmetallic Fabricated Materials | Miscellaneous Fabricated Nonmetallic Materials

Supply Group (FSG) NSN Assign. NIIN
93 18 MAR 1972 00-089-0578

Cross Reference | NSN 9390-00-089-0578

Part Number Cage Code Manufacturer
693845 77445 UNITED TECHNOLOGIES CORPORATION DBA PRATT WHITNEY-SPARE PARTS

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 9390-00-089-0578

Technical Data | NSN 9390-00-089-0578

Characteristic Specifications
CROSS-SECTIONAL SHAPE STYLE B5A1
OVERALL HEIGHT 0.130 INCHES MINIMUM AND 0.180 INCHES MAXIMUM
OVERALL WIDTH 0.620 INCHES MINIMUM AND 0.645 INCHES MAXIMUM
RIGHT SIDE FLANGE HEIGHT 0.130 INCHES MINIMUM AND 0.160 INCHES MAXIMUM
LEFT SIDE FLANGE THICKNESS 0.060 INCHES MINIMUM AND 0.090 INCHES MAXIMUM
RIGHT SIDE FLANGE THICKNESS 0.060 INCHES MINIMUM AND 0.090 INCHES MAXIMUM
FILLET RADIUS WHERE LEFT FLANGE JOINS BASE FLANGE 0.016 INCHES MINIMUM AND 0.047 INCHES MAXIMUM
BASE FLANGE THICKNESS 0.060 INCHES MINIMUM AND 0.070 INCHES MAXIMUM
FILLET RADIUS WHERE RIGHT FLANGE JOINS BASE FLANGE 0.016 INCHES MINIMUM AND 0.047 INCHES MAXIMUM
LENGTH 1.800 INCHES MINIMUM AND 1.820 INCHES MAXIMUM
MATERIAL RUBBER,SILICONE,AMS 3349
NONMETALLIC HARDNESS RATING 65.0 MINIMUM SHORE DUROMETER A AND 75.0 MAXIMUM SHORE DUROMETER A
MINIMUM TENSILE STRENGTH 1100 POUNDS PER SQUARE INCH
TEMP RATING NOT RATED
ENVIRONMENTAL PROTECTION NOT RATED
MANUFACTURERS CODE 77445
DESIGN CONTROL REFERENCE 693845

Restrictions/Controls & Freight Information | NSN 9390-00-089-0578

Category Code Description
Shelf-Life Code:0Nondeteriorative
Hazardous Material Indicator CodePThere is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product
Demilitarization Code:ANon-Munitions List Item/ Non-Strategic List Item - Demilitarization not required.
Controlled Inventory Item Code:UUNCLASSIFIED
Precious Metals Indicator Code:UPrecious metal type is unknown
Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Category Code Description
NMF Description 194120 WASHERS/GASKETS/PCKG DVCS NOI
Less than car load rating
Less than truck load rating W Rating Variable
Water commodity Code 596 unknown
Originating Activity Code KE Naval ICP
Philadelphia, PA 19111
Air Dimension Code A Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Air Commodity V Vehicles, machinery, shop and warehouse equipment and supplies, including special tools and equipment, ground servicing and special purpose vehicles, marine equipment and supplies, repair and maintenance parts for the above.
Air Special Handling Z No special handling required.
Special Handling Code 9 unknonwn
HAZMAT
Type of Cargo Z No special type of cargo code applicable

Management | NSN 9390-00-089-0578

Category Code Description
Budget Code9 General Support DIV57X4921.070:Air Force decentrally managed expense items (ERRC XB3, XF-3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors.
Price ValidationN The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
  • The price has not been analyzed or reviewed for accuracy.
  • ZOP or Standard price challenges are permissible, but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of ?L? or?F?,the case must be evaluated locally where purchased or fabricated.
Fund CodeSFStock fund applicable to items managed for the Air Force by the respective Inventory Control Point.
Source of SupplySMSDefense Logistics Agency
Enterprise Business Systems
AgencyDFDepartment of the Air Force
Service OrganizationFU.S. Air Force
ReparabilityNStock Fund (except Munitions)
Acquisition Advice CodesZINSURANCE/NUMERIC STOCKAGE OBJECTIVE ITEM # Items which may be required occasionally or intermittently, and prudence requires that a nominal quantity of materiel be stocked due to the essentiality or the lead time of the item. 1. The item is centrally managed, stocked, and issued. 2. Requisitions will be submitted in accordance with IMM/Service requisitioning procedures.
Controlled Item CodeUUNCLASSIFIED
Shelf Life Code0Nondeteriorative
Purchasing QTY
UOM
A
EA : Each
Category Code Description
Cognizance Codes9BNavy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Source of SupplySMSDefense Logistics Agency
Enterprise Business Systems
AgencyDNDepartment of the Navy
Service OrganizationNU.S. Navy
Acquisition Advice CodesZINSURANCE/NUMERIC STOCKAGE OBJECTIVE ITEM # Items which may be required occasionally or intermittently, and prudence requires that a nominal quantity of materiel be stocked due to the essentiality or the lead time of the item. 1. The item is centrally managed, stocked, and issued. 2. Requisitions will be submitted in accordance with IMM/Service requisitioning procedures.
Controlled Item CodeUUNCLASSIFIED
Shelf Life Code0Nondeteriorative
Purchasing QTY
UOM
A
EA : Each