Product Details | TRANSIT

6675-01-383-9673 An instrument having two coaxial centers, one inside the other. A telescope is attached to the inner center and mounted in such a manner that it may be rotated in vertical or horizontal arcs. The outer center carries the horizontal scale. The telescope and horizontal circular scale may rotate about the same axis, independent of each other, or integrally, as a single unit. The scales are read visually by means of verniers. The instrument is usually leveled by means of four leveling screws. It is used for measuring horizontal, or horizontal and vertical angles. Excludes TRANSIT, POCKET.

Part Alternates: 115, 732760, 7327-60, 6675-01-383-9673, 01-383-9673, 6675013839673, 013839673

Instruments and Laboratory Equipment | Drafting, Surveying, and Mapping Instruments

Supply Group (FSG) NSN Assign. NIIN
66 07 DEC 1993 01-383-9673

Cross Reference | NSN 6675-01-383-9673

Part Number Cage Code Manufacturer
115 8A688 SOKKIA MEASURING SYSTEMS
7327-60 8A688 SOKKIA MEASURING SYSTEMS

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 6675-01-383-9673

Technical Data | NSN 6675-01-383-9673

Characteristic Specifications
SIGHTING DEVICE TYPE TELESCOPE
TELESCOPE TYPE ERECTING
FOCUSING TYPE EXTERNAL
DIAMETER MAGNIFYING POWER 23.0 NOMINAL
EFFECTIVE APERTURE SIZE 32.0 MILLIMETERS NOMINAL
AUXILIARY TELESCOPE NOT INCLUDED
TELESCOPE LEVEL VIAL INCLUDED
ILLUMINATED FEATURE NOT INCLUDED
HORIZONTAL CIRCLE VERNIER QUANTITY 1
HORIZONTAL CIRCLE VERNIER GRADUATION UNIT 1.0 MINUTES
HORIZONTAL CIRCLE MINIMUM GRADUATION UNIT 30.0 MINUTES
VERTICAL CIRCLE INCLUDED
VERTICAL CIRCLE MINIMUM VERNIER GRADUATION UNIT 1.0 MINUTES
VERTICAL CIRCLE MINIMUM GRADUATION UNIT 30.0 MINUTES
TRIPOD NOT INCLUDED
COMPASS NOT INCLUDED
ACCESSORY COMPONENTS AND QUANTITY SUNSHADE,1;LENS CAP,1;PLUMB BOB,1;MAGNIFIER,1;ADJUSTING PINS;SCREWDRIVER,1;RAIN COVER,1;OPERATION MANUAL
CARRYING CASE PROVIDED
SPECIAL FEATURES TELESCOPE ROTATES 360 DEGREES; BASE PLATE 3.5 X 8.0 INCHES W/4 LEVELINGSCREWS; UPPER AND LOWER MOTIONS ALLOW PRE-SETTING OF ANY HORIZONTAL CIRCLE POSITION

Restrictions/Controls & Freight Information | NSN 6675-01-383-9673

Category Code Description
Shelf-Life Code:0Nondeteriorative
Hazardous Material Indicator CodePThere is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product
Demilitarization Code:ANon-Munitions List Item/ Non-Strategic List Item - Demilitarization not required.
Controlled Inventory Item Code:JPILFERAGE - PILFERAGE CONTROLS MAY BE DESIGNATED BY THE CODING ACTIVITY TO ITEMS CODED U (UNCLASSIFIED) BY RECORDING THE ITEM TO J./
Precious Metals Indicator Code:AItem does not contain precious metal
Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Automatic Data Processing Equipment:0Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9)
Category Code Description
NMF Description 147730 OUTFITS MILITARY SURVEYING SUB1
Less than car load rating G 125
Less than truck load rating F 150.0
Water commodity Code 72E unknown
Originating Activity Code SE San Antonio Air Logistics Center
Kelly AFB, TX 78241-5000
Air Dimension Code A Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Air Commodity E Engineer supplies, other than those listed under code B.
Air Special Handling Z No special handling required.
Special Handling Code 9 unknonwn
HAZMAT
Type of Cargo Z No special type of cargo code applicable

Management | NSN 6675-01-383-9673

Category Code Description
Price ValidationP The current standard price is the initial negotiated provisioned price.
  • This is the price paid by DoD for the item as the result of price negotiation of the Provisioned Item Order (PIO) or other initial negotiated price.
  • ZOP or Standard Price challenges are permissible but should be supported with adequate justification.
Materiel Management Aggregation CodeRNTG:GROUND SUPPORT EQUIPMENT (FSC RESIDUAL MMAC)
Budget CodeY variousO & M:AF centrally procured equipment items. They are separate, primary end items (other than the weapon system itself) needed by a user to perform an assigned mission. They are nonexpendable items (ERRCD NF or ND) which are not consumed in use, and they do not lose their original identity during periods of use by incorporation into, or attachment to another assembly.
Source of SupplyFLZWarner Robins Air Logistics Center
Robins AFB, GA 31098-5609
AgencyDFDepartment of the Air Force
Service OrganizationLLead Service - 22 (Repairable)
ReparabilityUAF Equipment Management System (AFEMS)
Acquisition Advice CodesVTERMINAL ITEM # Identifies items in stock, but future procurement is not authorized. Requisitions may continue to be submitted until stocks are exhausted. Preferred item National Stock Number is normally provided by application of the phrase: When Exhausted Use (NSN). Requisitions will be submitted in accordance with IMM/Service requisitioning procedures as applicable.
Controlled Item CodeJPILFERAGE - PILFERAGE CONTROLS MAY BE DESIGNATED BY THE CODING ACTIVITY TO ITEMS CODED U (UNCLASSIFIED) BY RECORDING THE ITEM TO J.
Shelf Life Code0Nondeteriorative
Purchasing QTY
UOM
1
EA : Each