Product Details | BACTERIOLOGICAL INCUBATOR

6640-00-984-1910 00001016640000000

Part Alternates: 46045, 565, 6640-00-984-1910, 00-984-1910, 6640009841910, 009841910

Instruments and Laboratory Equipment | Laboratory Equipment and Supplies

Supply Group (FSG) NSN Assign. NIIN
66 01 JAN 1962 00-984-1910

Cross Reference | NSN 6640-00-984-1910

Part Number Cage Code Manufacturer
46045 11273 CENTRAL SCIENTIFIC CO EDUCATIONAL
565 21519 MANOSTAT CORP

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 6640-00-984-1910

Technical Data | NSN 6640-00-984-1910

Characteristic Specifications
OPERATING TEMP RANGE IN DEG CELSIUS 5.0 TO 50.0
HEAT SOURCE FOR WHICH DESIGNED INTEGRAL
HEATING METHOD ELECTRICAL
CURRENT TYPE AC
VOLTAGE RATING 110.000 VOLTS MINIMUM AND 115.000 VOLTS MAXIMUM
FREQUENCY RATING 60.0 HERTZ NOMINAL
POWER RATING ANY ACCEPTABLE
CIRCULATION METHOD FORCED AIR
WATER JACKET NOT PROVIDED
OUTSIDE HEIGHT ANY ACCEPTABLE
OUTSIDE WIDTH ANY ACCEPTABLE
OUTSIDE DEPTH ANY ACCEPTABLE
INSIDE HEIGHT 32.000 INCHES MINIMUM
INSIDE WIDTH 18.000 INCHES MINIMUM
INSIDE DEPTH 14.000 INCHES MINIMUM
INSULATED CABINET PROVIDED
CABINET OUTER WALL MATERIAL STEEL
CABINET INNER WALL MATERIAL STEEL
OUTER DOOR QUANTITY 1
OUTER DOOR MATERIAL STEEL
OUTER DOOR INSULATION FEATURE INCLUDED
SHELF QUANTITY 3
SHELF ADJUSTABILITY NOT ADJUSTABLE
SHELF MATERIAL STEEL, CORROSION RESISTING
MATERIAL CHARACTERISTIC GRID
VACUUM CHAMBER NOT INCLUDED
CONTROL TYPE THERMOMETER-REGULATOR AND THERMOMETER AND PILOT LIGHT
SPECIAL FEATURES CABINET OUTER WALL MATERIAL,W/WHITE BAKED ENAMEL FINISH! CABINET INNER WALL MATERIAL,W/PORCELAIN AND PLASTIC FINISH! OUTER DOOR MATERIAL,W/WHITE BAKED ENAMEL FINISH

Restrictions/Controls & Freight Information | NSN 6640-00-984-1910

Category Code Description
Shelf-Life Code:0Nondeteriorative
Hazardous Material Indicator CodePThere is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product
Demilitarization Code:QStrategic List Item (SLI). Demilitarization not required. SLI are non-MLI(Munitions List Items) controlled by the U.S. Dept. of Commerce through the Export Administration Regulations (EAR) and indicated on the Commerce Control List (CCL). Each CCL entry is preceded by a four-digit Export Control Commerce Control List Item (CCLI) – MUT to the point of scrap required outside the United States. Inside the United States, MUT is required when the DEMIL integrity code (IC) is “3” and MUT is not required when the DEMIL IC is “6.”
Controlled Inventory Item Code:UUNCLASSIFIED
Electro-static Discharge Susceptible:ANo known Electrostatic Discharge (ESD) or Electromagnetic Interference (EMI) sensitivity
Precious Metals Indicator Code:AItem does not contain precious metal
Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Automatic Data Processing Equipment:0Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9)
Category Code Description
NMF Description 014500 APPARATUS CHEMICAL LABORATORY
Less than car load rating M 85
Less than truck load rating F 150.0
Water commodity Code 72E unknown
Originating Activity Code XX
Air Dimension Code A Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Air Commodity H Signal Corps supplies and equipment, including radio equipment and supplies, communications equipment and supplies, electrical equipment and supplies, etc.
Air Special Handling Q Extremely fragile items including delicate instruments.
Special Handling Code 9 unknonwn
HAZMAT
Type of Cargo Z No special type of cargo code applicable

Management | NSN 6640-00-984-1910

Category Code Description
Materiel Management Aggregation CodeRNTG:GROUND SUPPORT EQUIPMENT (FSC RESIDUAL MMAC)
Price ValidationX The current standard price has been validated and the previous price was erroneous.
  • The item was overpriced and the contractor has refunded the overcharge or DoD activities did not actually pay the previous price. The price paid is within the analyzed acceptable range.
  • If the difference from the previous price exceeds $99.99, or if the price change exceeds 500 percent and the extended value of any affected transaction exceeds $99.99, then reverse-post procedures will apply where the stock fund has overcharged unit O&M Funds. These corrections will be limited to the current fiscal year.
    • ZOP or Standard Price challenges are permissible, but should be supported by adequate justification
Budget CodeY variousO & M:AF centrally procured equipment items. They are separate, primary end items (other than the weapon system itself) needed by a user to perform an assigned mission. They are nonexpendable items (ERRCD NF or ND) which are not consumed in use, and they do not lose their original identity during periods of use by incorporation into, or attachment to another assembly.
Source of SupplyFLZWarner Robins Air Logistics Center
Robins AFB, GA 31098-5609
AgencyDFDepartment of the Air Force
Service OrganizationLLead Service - 22 (Repairable)
ReparabilityUAF Equipment Management System (AFEMS)
Acquisition Advice CodesVTERMINAL ITEM # Identifies items in stock, but future procurement is not authorized. Requisitions may continue to be submitted until stocks are exhausted. Preferred item National Stock Number is normally provided by application of the phrase: When Exhausted Use (NSN). Requisitions will be submitted in accordance with IMM/Service requisitioning procedures as applicable.
Controlled Item CodeUUNCLASSIFIED
Shelf Life Code0Nondeteriorative
Purchasing QTY
UOM
1
EA : Each