Product Details | RESISTANCE STANDARD

6625-01-521-8463 An item whose resistance is known to a high degree of accuracy which permits it to be used as a basis for determining the value of other resistances, capacitances, and/or inductances and for calibrating instruments. See also RESISTOR, FIXED (as modified) and SHUNT, INSTRUMENT. Excludes RESISTOR, DECADE.

Part Alternates: PD04WRLEEC18, PD07CBSSSGBEC32, 6625-01-521-8463, 01-521-8463, 6625015218463, 015218463

Instruments and Laboratory Equipment | Electrical and Electronic Properties Measuring and Testing Instruments

Supply Group (FSG) NSN Assign. NIIN
66 07 JUL 2004 01-521-8463

Cross Reference | NSN 6625-01-521-8463

Part Number Cage Code Manufacturer
PD04WRLEEC18 98752 WARNER ROBINS AIR LOGISTICS CENTER
PD07CBSSSGBEC32 98752 WARNER ROBINS AIR LOGISTICS CENTER

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 6625-01-521-8463

Technical Data | NSN 6625-01-521-8463

Characteristic Specifications
ELECTRICAL RESISTANCE 100.0 MEGOHMS
TERMINAL QUANTITY 2 AND 4
TERMINAL LOCATION CONFIGURATION REAR PANEL
CASE NOT PROVIDED
OVERALL LENGTH 72.000 INCHES NOMINAL
OVERALL WIDTH 36.000 INCHES NOMINAL
SPECIAL FEATURES POWER 120 VAC +/- 10%, 60HZ +/- 3%; WEIGHT 300 LBS.; RACK IS REQUIRED FOR THIS SYSTEM; OPERATING TEMP. 22.8DEGREES C, +/- 3.3 DEGREES C; COMPLETE SET OF INTERFACE CABLES INCLUDED; 200 FEET OF SHIELDED SOILD COPPER WIRE SUITABLE FOR MAKING STANDARD 4 WIRE, LOW NOISE, LOW THERMAL, RESISTANCE MEASUREMENTS; PROCESS CONTROLLER SHALL BE A MINIMUM OF 200MHZ INTEL PENTIUM, 32MB MEMORY, 1GB HARD DRIVE AND 17" MONITOR;COMPLIANCE VOLTAGE +/- 30 VOLTS; TOTAL MEASUREMENT/UNCERTAINITY, RESISTANCE RANGE 0.1 TO 100M, UNCERTAINITY <1 TO <25, TEST CURRENT RANGE 10MICROAMP TO 150 MILLI-AMP CONTINUOUSLY VARIABLE

Restrictions/Controls & Freight Information | NSN 6625-01-521-8463

Category Code Description
Shelf-Life Code:0Nondeteriorative
Hazardous Material Indicator CodePThere is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product
Demilitarization Code:ANon-Munitions List Item/ Non-Strategic List Item - Demilitarization not required.
Controlled Inventory Item Code:UUNCLASSIFIED
Precious Metals Indicator Code:AItem does not contain precious metal
Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Automatic Data Processing Equipment:0Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9)
Category Code Description
NMF Description 061700 ELEC APPLIANCES/INSTRUMENTS NOI
Less than car load rating P 77.5
Less than truck load rating J 100.2
Water commodity Code 72D unknown
Originating Activity Code TK HQ AFMC/GLSC 401 SCM/GUMB
Wright-Patterson AFB, OH 45433-5000
Air Dimension Code A Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Air Commodity V Vehicles, machinery, shop and warehouse equipment and supplies, including special tools and equipment, ground servicing and special purpose vehicles, marine equipment and supplies, repair and maintenance parts for the above.
Air Special Handling Z No special handling required.
Special Handling Code 9 unknonwn
HAZMAT
Type of Cargo 3 Electrostatic Sensitive Device (ESD), subject to damage caused by electrostatic discharge. (See DoD 4500.32-R, Volume 1, Appendix A, Section I for additional information on ESD devices).

Management | NSN 6625-01-521-8463

Category Code Description
Price ValidationN The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
  • The price has not been analyzed or reviewed for accuracy.
  • ZOP or Standard price challenges are permissible, but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of ?L? or?F?,the case must be evaluated locally where purchased or fabricated.
Materiel Management Aggregation CodeRHTG:AUTO TEST EQUIPMENT/AUTO TEST SYSTEMS (ATE/ATS) (FSC RESIDUAL MMAC)
Budget CodeY variousO & M:AF centrally procured equipment items. They are separate, primary end items (other than the weapon system itself) needed by a user to perform an assigned mission. They are nonexpendable items (ERRCD NF or ND) which are not consumed in use, and they do not lose their original identity during periods of use by incorporation into, or attachment to another assembly.
Source of SupplyFLZWarner Robins Air Logistics Center
Robins AFB, GA 31098-5609
AgencyDFDepartment of the Air Force
Service OrganizationLLead Service - 22 (Repairable)
ReparabilitySAF Equipment Management System (AFEMS)
Acquisition Advice CodesVTERMINAL ITEM # Identifies items in stock, but future procurement is not authorized. Requisitions may continue to be submitted until stocks are exhausted. Preferred item National Stock Number is normally provided by application of the phrase: When Exhausted Use (NSN). Requisitions will be submitted in accordance with IMM/Service requisitioning procedures as applicable.
Controlled Item CodeUUNCLASSIFIED
Shelf Life Code0Nondeteriorative
Purchasing QTY
UOM
1
EA : Each