Product Details | SIGNAL GENERATOR

6625-01-310-2528 An instrument which produces a continuous audio and/or radio frequency voltage, and which is designed for test purposes only. It may provide an output at one or more fixed frequencies or be continuously variable over one or more bands. The fixed frequency type is distinguished from CALIBRATOR, FREQUENCY in that it is a voltage source and is not primarily intended for checking frequencies from other sources. Excludes GENERATOR, INTERFERENCE.

Part Alternates: 8403A004H34, 8403A-004-H34, 840A004H34, 840A-004-H34, 6625-01-310-2528, 01-310-2528, 6625013102528, 013102528

Instruments and Laboratory Equipment | Electrical and Electronic Properties Measuring and Testing Instruments

Supply Group (FSG) NSN Assign. NIIN
66 01-310-2528

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 6625-01-310-2528

Technical Data | NSN 6625-01-310-2528

Characteristic Specifications
FREQUENCY RANGE RATING NOT RATED
FIXED FREQUENCY RATING 50.0 HERTZ AND 50.0 KILOHERTZ
CALIBRATION ACCURACY RATING 45/55SYMMETRY VS CALIBRATION ACCURACY
CRYSTAL CONTROLLED FEATURE NOT PROVIDED
MAXIMUM SIGNAL OUTPUT 15VPEAK
OUTPUT IMPEDANCE RATING 330.0 OHMS NOMINAL
MODULATOR LOCATION INTERNAL
MODULATION TYPE PULSE AND SQUARE WAVE
MODULATED FREQUENCY RATING 50.0 HERTZ NOMINAL AND 50.0 KILOHERTZ NOMINAL
PULSE REPETITION FREQUENCY RATING 50.0 HERTZ NOMINAL AND 50.0 KILOHERTZ NOMINAL
MODULATION DEGREE 0.1 USEC PULSE MINIMUM AND 800.0 USEC PULSE MAXIMUM
CURRENT TYPE AC
VOLTAGE RATING 103.5 VOLTS MINIMUM AND 126.5 VOLTS MAXIMUM
FREQUENCY RATING 50.0 HERTZ MINIMUM AND 400.0 HERTZ MAXIMUM
PHASE SINGLE
INTERNAL BATTERY ACCOMMODATION NOT INCLUDED
OVERALL LENGTH 18.375 INCHES NOMINAL
OVERALL WIDTH 16.750 INCHES NOMINAL
OVERALL HEIGHT 3.750 INCHES NOMINAL
MOUNTING TYPE RACK
III END ITEM IDENTIFICATION GEN-AP-T
MANUFACTURERS CODE 08125
DESIGN CONTROL REFERENCE 840A-004-H34

Restrictions/Controls & Freight Information | NSN 6625-01-310-2528

Category Code Description
Hazardous Material Indicator CodePThere is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product
Category Code Description
No Freight Information