Product Details | NOISE LEVEL METER

6625-01-124-3853 An instrument which measures the level of continuous noise present in amplifier and/or receiver circuits with reference to a fixed level of signal generated by a separate noise source. It is designed to measure noise levels over a wide band of frequencies including radio and video frequencies, and is normally calibrated in decibels relative to a specified r.m.s. voltage summation across a specified impedance, or in decibels relative to a specified noise power level. If only audio frequency range, see METER, AUDIO LEVEL.

Part Alternates: 7514, 6625-01-124-3853, 01-124-3853, 6625011243853, 011243853

Instruments and Laboratory Equipment | Electrical and Electronic Properties Measuring and Testing Instruments

Supply Group (FSG) NSN Assign. NIIN
66 01 JAN 1982 01-124-3853

Drawings & Photos | NSN 6625-01-124-3853


Cross Reference | NSN 6625-01-124-3853

Part Number Cage Code Manufacturer
7514 00752 EDO CORPORATION DIV EDO CORPORATION AP&T

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 6625-01-124-3853

Technical Data | NSN 6625-01-124-3853

Characteristic Specifications
INSTALLATION DESIGN BENCH
INDICATOR TYPE DIAL W/POINTER
MEASUREMENT RANGE 0.010 TO 10.000 GIGAHERTZ SINGLE INDICATOR 1ST RANGE 0.000 TO 33.000 GIGAHERTZ SINGLE INDICATOR 2ND RANGE
ACCURACY IN PERCENT -0.1 TO 0.1 AT FULL SCALE SINGLE INDICATOR SINGLE RANGE
SCALE GRADUATION TYPE NONLINEAR SINGLE INDICATOR SINGLE RANGE
POINTER COLOR BLACK SINGLE INDICATOR SINGLE RANGE
DIAL SCALE MARKING COLOR BLACK SINGLE INDICATOR SINGLE RANGE
SCALE SELECTION METHOD SWITCH
CIRCUIT CURRENT FOR WHICH DESIGNED AC
OPERATING VOLTAGE RATING IN VOLTS 115.0 AC MINIMUM AND 230.0 AC MAXIMUM
FREQUENCY RATING 50.0 HERTZ MINIMUM AND 400.0 HERTZ MAXIMUM
PHASE SINGLE
STYLE DESIGNATOR D1 RECTANGULAR OR SQUARE
OVERALL HEIGHT 8.000 INCHES NOMINAL
OVERALL LENGTH 20.125 INCHES NOMINAL
OVERALL WIDTH 19.750 INCHES NOMINAL
FEATURES PROVIDED PORTABLE
SPECIAL FEATURES SELF-CALIBRATION FOR 10 MHZ TO 40 GHZ NOISE SOURCES, 5 SELECTABLE RANGES, SIGNAL STRENGTH AND OVERRANGE INDICATOR, CAN USE AILTECH 76 SERIES SOLID STATE NOISE SOURCES OR SERIES 70 GAS-DISCHARGE NOISE GENERATORS
III UNIT OF ISSUE WEIGHT 31.000 POUNDS

Restrictions/Controls & Freight Information | NSN 6625-01-124-3853

Category Code Description
Shelf-Life Code:0Nondeteriorative
Hazardous Material Indicator CodePThere is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product
Demilitarization Code:QStrategic List Item (SLI). Demilitarization not required. SLI are non-MLI(Munitions List Items) controlled by the U.S. Dept. of Commerce through the Export Administration Regulations (EAR) and indicated on the Commerce Control List (CCL). Each CCL entry is preceded by a four-digit Export Control Commerce Control List Item (CCLI) – MUT to the point of scrap required outside the United States. Inside the United States, MUT is required when the DEMIL integrity code (IC) is “3” and MUT is not required when the DEMIL IC is “6.”
Controlled Inventory Item Code:UUNCLASSIFIED
Electro-static Discharge Susceptible:ANo known Electrostatic Discharge (ESD) or Electromagnetic Interference (EMI) sensitivity
Precious Metals Indicator Code:AItem does not contain precious metal
Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Automatic Data Processing Equipment:0Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9)
Category Code Description
NMF Description 062820 RADIO/TV TRANSMIT/RECEIVE SETS SUB1
Less than car load rating J 100.2
Less than truck load rating J 100.2
Water commodity Code 72D unknown
Originating Activity Code ZA Australia
ZB
ZC
Air Dimension Code A Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Air Commodity
Air Special Handling Z No special handling required.
Special Handling Code Z unknonwn
HAZMAT
Type of Cargo Z No special type of cargo code applicable