Product Details | RESISTANCE BRIDGE

6625-00-602-7840 A test instrument which will measure an unknown resistance by electrical comparison with calibrated known resistors.

Part Alternates: RS925, RS925A, 6625-00-602-7840, 00-602-7840, 6625006027840, 006027840

Instruments and Laboratory Equipment | Electrical and Electronic Properties Measuring and Testing Instruments

Supply Group (FSG) NSN Assign. NIIN
66 01 JAN 1963 00-602-7840

Cross Reference | NSN 6625-00-602-7840

Part Number Cage Code Manufacturer
RS925 11837 ELECTRO SCIENTIFIC INDUSTRIES INC
RS925 9Y504 ELECTRO SCIENTIFIC INDUSTRIES, INC. DBA E S I
RS925A 11837 ELECTRO SCIENTIFIC INDUSTRIES INC
RS925A 9Y504 ELECTRO SCIENTIFIC INDUSTRIES, INC. DBA E S I

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 6625-00-602-7840

Technical Data | NSN 6625-00-602-7840

Characteristic Specifications
SCALE CALIBRATION 10.0 MILLIOHMS TO 1.2 MEGOHMS
SCALE OVERALL ACCURACY RATING IN PERCENT -0.005 TO 0.005
ADJUSTMENT METHOD VARIABLE RESISTOR
BALANCE INDICATOR TYPE GALVANOMETER
OVERALL LENGTH 19.000 INCHES NOMINAL
OVERALL WIDTH 8.000 INCHES NOMINAL
OVERALL HEIGHT 7.000 INCHES NOMINAL
SPECIAL FEATURES 8 DECADES PLUS 105 DIVISION RHEOSTAT,REQUIRES 4 TERMINAL CONNECTIONS
MANUFACTURERS CODE 11837
DESIGN CONTROL REFERENCE RS925A

Restrictions/Controls & Freight Information | NSN 6625-00-602-7840

Category Code Description
Shelf-Life Code:0Nondeteriorative
Hazardous Material Indicator CodePThere is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product
Demilitarization Code:QStrategic List Item (SLI). Demilitarization not required. SLI are non-MLI(Munitions List Items) controlled by the U.S. Dept. of Commerce through the Export Administration Regulations (EAR) and indicated on the Commerce Control List (CCL). Each CCL entry is preceded by a four-digit Export Control Commerce Control List Item (CCLI) – MUT to the point of scrap required outside the United States. Inside the United States, MUT is required when the DEMIL integrity code (IC) is “3” and MUT is not required when the DEMIL IC is “6.”
Controlled Inventory Item Code:UUNCLASSIFIED
Precious Metals Indicator Code:AItem does not contain precious metal
Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Automatic Data Processing Equipment:0Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9)
Category Code Description
NMF Description 061700 ELEC APPLIANCES/INSTRUMENTS NOI
Less than car load rating J 100.2
Less than truck load rating J 100.2
Water commodity Code 72D unknown
Originating Activity Code XX
Air Dimension Code A Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Air Commodity V Vehicles, machinery, shop and warehouse equipment and supplies, including special tools and equipment, ground servicing and special purpose vehicles, marine equipment and supplies, repair and maintenance parts for the above.
Air Special Handling Z No special handling required.
Special Handling Code 9 unknonwn
HAZMAT
Type of Cargo 3 Electrostatic Sensitive Device (ESD), subject to damage caused by electrostatic discharge. (See DoD 4500.32-R, Volume 1, Appendix A, Section I for additional information on ESD devices).

Management | NSN 6625-00-602-7840

Category Code Description
Materiel Management Aggregation CodeKVTG:AUTOMATIC TEST EQUIPMENT (ATE)
Price ValidationN The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
  • The price has not been analyzed or reviewed for accuracy.
  • ZOP or Standard price challenges are permissible, but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of ?L? or?F?,the case must be evaluated locally where purchased or fabricated.
Budget CodeY variousO & M:AF centrally procured equipment items. They are separate, primary end items (other than the weapon system itself) needed by a user to perform an assigned mission. They are nonexpendable items (ERRCD NF or ND) which are not consumed in use, and they do not lose their original identity during periods of use by incorporation into, or attachment to another assembly.
Source of SupplyFLZWarner Robins Air Logistics Center
Robins AFB, GA 31098-5609
AgencyDFDepartment of the Air Force
Service OrganizationLLead Service - 22 (Repairable)
ReparabilitySAF Equipment Management System (AFEMS)
Acquisition Advice CodesVTERMINAL ITEM # Identifies items in stock, but future procurement is not authorized. Requisitions may continue to be submitted until stocks are exhausted. Preferred item National Stock Number is normally provided by application of the phrase: When Exhausted Use (NSN). Requisitions will be submitted in accordance with IMM/Service requisitioning procedures as applicable.
Controlled Item CodeUUNCLASSIFIED
Shelf Life Code0Nondeteriorative
Purchasing QTY
UOM
1
EA : Each