Product Details | MULTIMETER

6625-00-575-8085 An instrument which is arranged to measure two or more different electrical quantities (such as volts, amps, and ohms) by means of associated circuits and switches. The value is usually expressed on a single calibrated dial or digital readout display. For items which are connected into a circuit and used chiefly to visually monitor an operation, see METER, MULTIPLE SCALE. See also COUNTER, ELECTRONIC, DIGITAL READOUT. Excludes BRIDGE (as modified).

Part Alternates: A512T002101, A512T002-101, PM2421Q101, 4P22042101A, 4P22042-101A , 6625-00-575-8085, 00-575-8085, 6625005758085, 005758085

Instruments and Laboratory Equipment | Electrical and Electronic Properties Measuring and Testing Instruments

Supply Group (FSG) NSN Assign. NIIN
66 11 DEC 1974 00-575-8085

Drawings & Photos | NSN 6625-00-575-8085


Cross Reference | NSN 6625-00-575-8085

Part Number Cage Code Manufacturer
A512T002-101 10241 TELEPHONE SYSTEMS/COMMUNICATIONS
PM2421Q101 88978 PHILIPS ELECTRONIC INSTRUMENTS INC

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 6625-00-575-8085

Technical Data | NSN 6625-00-575-8085

Characteristic Specifications
INSTALLATION DESIGN BENCH
(NON-CORE DATA) CIRCUIT CONSTRUCTION TYPE ELECTRONIC, SOLID STATE
OPERATING VOLTAGE RATING IN VOLTS 115.0 AC MINIMUM AND 230.0 AC MAXIMUM
FREQUENCY RATING 48.0 HERTZ MINIMUM AND 63.0 HERTZ MAXIMUM
PHASE SINGLE
STYLE DESIGNATOR A1 ROUND SURFACE MTG
OVERALL HEIGHT 5.710 INCHES NOMINAL
OVERALL LENGTH 19.060 INCHES NOMINAL
OVERALL WIDTH 14.140 INCHES NOMINAL
SPECIAL FEATURES RANGES: TO 1399 VDC, 1399 MA DC; 500 VAC; TO 50 MOHMS; TO 1399 MA AC
REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS AS DIFFERENTIATED BY THE SOURCE CONTROL DWG NO.
MANUFACTURERS CODE 10241
MFR SOURCE CONTROLLING REFERENCE A512T002-101
MANUFACTURERS CODE 88978
DESIGN CONTROL REFERENCE PM2421Q101

Restrictions/Controls & Freight Information | NSN 6625-00-575-8085

Category Code Description
Hazardous Material Indicator CodePThere is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product
Demilitarization Code:ANon-Munitions List Item/ Non-Strategic List Item - Demilitarization not required.
Electro-static Discharge Susceptible:ANo known Electrostatic Discharge (ESD) or Electromagnetic Interference (EMI) sensitivity
Precious Metals Indicator Code:AItem does not contain precious metal
Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Automatic Data Processing Equipment:0Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9)
Category Code Description
NMF Description 011980 AIRCRAFT DOORS ENTRANCE/EXIT/ETC
Less than car load rating
Less than truck load rating F 150.0
Water commodity Code 671 unknown
Originating Activity Code SE San Antonio Air Logistics Center
Kelly AFB, TX 78241-5000
Air Dimension Code A Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Air Commodity
Air Special Handling Z No special handling required.
Special Handling Code 9 unknonwn
HAZMAT
Type of Cargo Z No special type of cargo code applicable

Management | NSN 6625-00-575-8085

Category Code Description
Budget Code9 General Support DIV57X4921.070:Air Force decentrally managed expense items (ERRC XB3, XF-3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors.
Price ValidationN The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
  • The price has not been analyzed or reviewed for accuracy.
  • ZOP or Standard price challenges are permissible, but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of ?L? or?F?,the case must be evaluated locally where purchased or fabricated.
Fund CodeSFStock fund applicable to items managed for the Air Force by the respective Inventory Control Point.
Materiel Management Aggregation CodeUCTG:C-5A GALAXY
Source of SupplySMSDefense Logistics Agency
Enterprise Business Systems
AgencyDFDepartment of the Air Force
Service OrganizationFU.S. Air Force
ReparabilityPStock Fund (except Munitions)
Acquisition Advice CodesDDoD INTEGRATED MATERIEL-MANAGED, STOCKED, AND ISSUED # Issue, transfer, or shipment is not subject to specialized controls other than those imposed by the Integrated Materiel Manager/Service supply policy. 1. The item is centrally managed, stocked, and issued. 2. Requisitions must contain the fund citation required to acquire the item. Requisitions will be submitted in accordance with Integrated Materiel Manager(IMM)/Service requisitioning procedures.
Controlled Item CodeUUNCLASSIFIED
Shelf Life Code0Nondeteriorative
Purchasing QTY
UOM
1
EA : Each