Product Details | VARIABLE ATTENUATOR

6625-00-503-9559 A device for reducing the strength of an alternating current signal either continuously or in steps, without causing appreciable signal distortion, by maintaining substantially constant output and/or input impedance match. Continuously variable resistive devices must consist of at least two sections or one section with at least two rotating contacts. The item must have an overall attenuation rating. Includes tandem mounted variable resistors designed to function as an attenuator but whose terminals are not connected. See also RESISTOR, VAIABLE (as modified).

Part Alternates: 005039559

Electrical and Electronic Equipment Components | Antennas, Waveguides, and Related Equipment

Supply Group (FSG) NSN Assign. NIIN
59 01 JAN 1963 00-503-9559

Cross Reference | NSN 6625-00-503-9559

Part Number Cage Code Manufacturer
AA1225-1 57057 NAVCOM DEFENSE ELECTRONICS, INC.

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 6625-00-503-9559

Technical Data | NSN 6625-00-503-9559

Characteristic Specifications
FREQUENCY RANGE 960.000 MEGAHERTZ MINIMUM AND 1.220 GIGAHERTZ MAXIMUM
POWER RATING 2.0 WATTS AVERAGE
MOUNTING FACILITY NOMINAL SCREW THREAD DIAMETER 0.164 INCHES
MOUNTING THREAD QUANTITY 32 PER INCH
OVERALL LENGTH 7.938 INCHES NOMINAL
MOUNTING FACILITY SCREW THREAD SERIES DESIGNATOR UNC
APPLICATION DESIGN WAVEGUIDE
ATTENUATION VARIATION METHOD CONTINUOUS
OVERALL ATTENUATION ACCURACY IN DECIBELS -0.22/+0.22
SPECIAL FEATURES 4 MTG HOLE/STUDS
OVERALL ATTENUATION RANGE IN DECIBELS +4.0/+110.0
OVERALL DIAMETER 1.125 INCHES NOMINAL
FSC APPLICATION DATA BEACON SIMULATOR
VOLTAGE STANDING WAVE RATIO 2.20

Restrictions/Controls & Freight Information | NSN 6625-00-503-9559

Category Code Description
Hazardous Material Indicator CodePThere is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product
Demilitarization Code:DMunitions List Item or Commerce Control List Item. Demilitarization required. Total destruction of the item and components so as to preclude restoration or repair to a usable condition by melting, cutting, tearing, scratching, crushing, breaking, punching, neutralizing, etc. (As an alternate, burial or deep water dumping may be used when coordinated with the DoD Demilitarization Program Office.)
Precious Metals Indicator Code:UPrecious metal type is unknown
Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Category Code Description
NMF Description 061700 ELEC APPLIANCES/INSTRUMENTS NOI
Less than car load rating W Rating Variable
Less than truck load rating W Rating Variable
Water commodity Code 658 unknown
Originating Activity Code XX
Air Dimension Code A Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Air Commodity H Signal Corps supplies and equipment, including radio equipment and supplies, communications equipment and supplies, electrical equipment and supplies, etc.
Air Special Handling Z No special handling required.
Special Handling Code 9 unknonwn
HAZMAT
Type of Cargo Z No special type of cargo code applicable