Product Details | DIGITAL READOUT ELECTRONIC COUNTER

6625-00-488-4652 An instrument used to count the frequency of recurrent electronic events and display the count on the panel of the instrument in numeric form. May also include facilities for a readout printed on tape. May include facilities for a very accurate output which can be used as a secondary transfer standard. It can be used to measure frequency, period, time interval, phase angle, frequency ratio, and for multiple period averaging. See also COUNTER, ELECTRONIC, DIGITAL and INDICATOR, DIGITAL DISPLAY.

Part Alternates: 5400032, 540-0032, 7AS385400032C, 7AS38-540-0032C, 7AS38C, 6625-00-488-4652, 00-488-4652, 6625004884652, 004884652

Instruments and Laboratory Equipment | Electrical and Electronic Properties Measuring and Testing Instruments

Supply Group (FSG) NSN Assign. NIIN
66 17 MAR 1972 00-488-4652

Cross Reference | NSN 6625-00-488-4652

Part Number Cage Code Manufacturer
540-0032 09552 ATEC, INC.
7AS38-540-0032C 09552 ATEC, INC.
7AS38C 09552 ATEC, INC.

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 6625-00-488-4652

Technical Data | NSN 6625-00-488-4652

Characteristic Specifications
MEASUREMENT TYPE FREQUENCY
FREQUENCY RANGE 0.002 TO 100.000 KILOHERTZ OVERALL
ACCURACY RATING PORM 1 COUNT,PORM FREQ STD
GATE TIME 1.0 SECONDS MINIMUM AND 999.0 SECONDS MAXIMUM
INTERNAL CALIBRATION FEATURE INCLUDED
DISPLAY TYPE NUMERIC READOUT TUBE
DISPLAY DIGIT QUANTITY 8
DISPLAY STORAGE FACILITY NOT INCLUDED
REMOTE CONTROL PROVISIONS NOT INCLUDED
SOLID STATE FEATURE INCLUDED
ELECTRICAL CONNECTION QUANTITY 4
ELECTRICAL CONNECTION TYPE BNC
INTERNAL BATTERY ACCOMMODATION NOT INCLUDED
PLUG-IN UNITS PROVISION NOT INCLUDED
STANDARD FREQUENCY OUTPUT FEATURE INCLUDED
OUTPUT FREQUENCY RATING 100.0 KILOHERTZ NOMINAL
FREQUENCY ACCURACY/STABILITY PORM 2 PARTS PER 1,000,000 PER WEEK
MANUFACTURERS CODE 09552
DESIGN CONTROL REFERENCE 7AS38-540-0032C

Restrictions/Controls & Freight Information | NSN 6625-00-488-4652

Category Code Description
Shelf-Life Code:0Nondeteriorative
Hazardous Material Indicator CodePThere is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product
Demilitarization Code:ANon-Munitions List Item/ Non-Strategic List Item - Demilitarization not required.
Controlled Inventory Item Code:UUNCLASSIFIED
Precious Metals Indicator Code:AItem does not contain precious metal
Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Automatic Data Processing Equipment:0Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9)
Category Code Description
NMF Description 061700 ELEC APPLIANCES/INSTRUMENTS NOI
Less than car load rating P 77.5
Less than truck load rating J 100.2
Water commodity Code 738 unknown
Originating Activity Code SE San Antonio Air Logistics Center
Kelly AFB, TX 78241-5000
Air Dimension Code A Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Air Commodity H Signal Corps supplies and equipment, including radio equipment and supplies, communications equipment and supplies, electrical equipment and supplies, etc.
Air Special Handling Z No special handling required.
Special Handling Code 9 unknonwn
HAZMAT
Type of Cargo 3 Electrostatic Sensitive Device (ESD), subject to damage caused by electrostatic discharge. (See DoD 4500.32-R, Volume 1, Appendix A, Section I for additional information on ESD devices).

Management | NSN 6625-00-488-4652

Category Code Description
Materiel Management Aggregation CodeRHTG:AUTO TEST EQUIPMENT/AUTO TEST SYSTEMS (ATE/ATS) (FSC RESIDUAL MMAC)
Price ValidationX The current standard price has been validated and the previous price was erroneous.
  • The item was overpriced and the contractor has refunded the overcharge or DoD activities did not actually pay the previous price. The price paid is within the analyzed acceptable range.
  • If the difference from the previous price exceeds $99.99, or if the price change exceeds 500 percent and the extended value of any affected transaction exceeds $99.99, then reverse-post procedures will apply where the stock fund has overcharged unit O&M Funds. These corrections will be limited to the current fiscal year.
    • ZOP or Standard Price challenges are permissible, but should be supported by adequate justification
Budget CodeY variousO & M:AF centrally procured equipment items. They are separate, primary end items (other than the weapon system itself) needed by a user to perform an assigned mission. They are nonexpendable items (ERRCD NF or ND) which are not consumed in use, and they do not lose their original identity during periods of use by incorporation into, or attachment to another assembly.
Source of SupplyFLZWarner Robins Air Logistics Center
Robins AFB, GA 31098-5609
AgencyDFDepartment of the Air Force
Service OrganizationLLead Service - 22 (Repairable)
ReparabilitySAF Equipment Management System (AFEMS)
Acquisition Advice CodesVTERMINAL ITEM # Identifies items in stock, but future procurement is not authorized. Requisitions may continue to be submitted until stocks are exhausted. Preferred item National Stock Number is normally provided by application of the phrase: When Exhausted Use (NSN). Requisitions will be submitted in accordance with IMM/Service requisitioning procedures as applicable.
Controlled Item CodeUUNCLASSIFIED
Shelf Life Code0Nondeteriorative
Purchasing QTY
UOM
1
EA : Each