Product Details | TELETYPEWRITER TEST SET

6625-00-243-5173 A test set primarily designed for use in making examinations of teletypewriter equipments. If the item can also be employed in making examinations of telephone equipments or circuits, use TEST SET, TELEPHONE. See also TEST SET, RELAY.

Part Alternates: SCD91351, 6625-00-243-5173, 00-243-5173, 6625002435173, 002435173

Instruments and Laboratory Equipment | Electrical and Electronic Properties Measuring and Testing Instruments

Supply Group (FSG) NSN Assign. NIIN
66 01 JAN 1963 00-243-5173

Cross Reference | NSN 6625-00-243-5173

Part Number Cage Code Manufacturer
SCD91351 80063 US ARMY COMMUNICATIONS & ELECTRONICS MATERIEL READINESS

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 6625-00-243-5173

Technical Data | NSN 6625-00-243-5173

Characteristic Specifications
TEST TYPE FOR WHICH DESIGNED TEST CALIBRATION OF BIAS METERS; TESTS EFFICIENCY OF SELECTING MECHANISM OF TELETYPEWRITER; DETERMINES OPERATING MARGINS OF START-STOP MECHANISMS OF TELETYPEWRITER; TRANSMITS DISTORTED SIGNAL BY BIAS OR END DISTORTION; TRANSMITS NORMAL UNDISTORTED SIGNALS
OPERATING TEST CAPABILITY GEARED AT 368.2 OPERATIONS PER MINUTE,ADJUSTABLE TO 404 OPERATIONS PER MINUTE FOR BRITISH EQUIPMENT,TRANSMITS CONTINUOUSLY ANY ONE OF FOUR TEST SIGNALS
AC VOLTAGE RATING 115.0 VOLTS NOMINAL
FREQUENCY RATING 50.0 HERTZ MINIMUM 60.0 HERTZ MAXIMUM
PHASE SINGLE
DC VOLTAGE RATING 115.0 VOLTS NOMINAL
INTERNAL BATTERY ACCOMMODATION NOT INCLUDED
INCLOSURE FEATURE SINGLE ITEM W/CARRYING CASE
MATERIAL AND LOCATION PLYWOOD CARRYING CASE
HEIGHT 14.000 INCHES NOMINAL
LENGTH 23.000 INCHES NOMINAL
WIDTH 17.000 INCHES NOMINAL
MAJOR COMPONENTS MOTOR UNIT
ACCESSORY COMPONENT QUANTITY 1
ACCESSORY CONTROLLING AGENCY TELETYPE CORP
ACCESSORY IDENTIFYING NUMBER MU-26/PU-93/TG TYPE NO.

Restrictions/Controls & Freight Information | NSN 6625-00-243-5173

Category Code Description
Hazardous Material Indicator CodePThere is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product
Demilitarization Code:QStrategic List Item (SLI). Demilitarization not required. SLI are non-MLI(Munitions List Items) controlled by the U.S. Dept. of Commerce through the Export Administration Regulations (EAR) and indicated on the Commerce Control List (CCL). Each CCL entry is preceded by a four-digit Export Control Commerce Control List Item (CCLI) – MUT to the point of scrap required outside the United States. Inside the United States, MUT is required when the DEMIL integrity code (IC) is “3” and MUT is not required when the DEMIL IC is “6.”
Precious Metals Indicator Code:AItem does not contain precious metal
Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Automatic Data Processing Equipment:0Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9)
Category Code Description
NMF Description 061700 ELEC APPLIANCES/INSTRUMENTS NOI
Less than car load rating P 77.5
Less than truck load rating J 100.2
Water commodity Code 738 unknown
Originating Activity Code XX
Air Dimension Code A Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Air Commodity H Signal Corps supplies and equipment, including radio equipment and supplies, communications equipment and supplies, electrical equipment and supplies, etc.
Air Special Handling Z No special handling required.
Special Handling Code 9 unknonwn
HAZMAT
Type of Cargo 3 Electrostatic Sensitive Device (ESD), subject to damage caused by electrostatic discharge. (See DoD 4500.32-R, Volume 1, Appendix A, Section I for additional information on ESD devices).