Product Details | MULTIMETER

6625-00-243-0562 An instrument which is arranged to measure two or more different electrical quantities (such as volts, amps, and ohms) by means of associated circuits and switches. The value is usually expressed on a single calibrated dial or digital readout display. For items which are connected into a circuit and used chiefly to visually monitor an operation, see METER, MULTIPLE SCALE. See also COUNTER, ELECTRONIC, DIGITAL READOUT. Excludes BRIDGE (as modified).

Part Alternates: TS-505/U, TS505U, 8175570, 6625-00-243-0562, 00-243-0562, 6625002430562, 002430562

Instruments and Laboratory Equipment | Electrical and Electronic Properties Measuring and Testing Instruments

Supply Group (FSG) NSN Assign. NIIN
66 01 JAN 1961 00-243-0562

Drawings & Photos | NSN 6625-00-243-0562


Cross Reference | NSN 6625-00-243-0562

Part Number Cage Code Manufacturer
8175570 18876 U S ARMY AVIATION AND MISSILE COMMAND
TS-505/U 80058 JOINT ELECTRONICS TYPE DESIGNATION SYSTEM
TS-505/U 81349 MILITARY SPECIFICATIONS PROMULGATED BY MILITARY

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 6625-00-243-0562

Technical Data | NSN 6625-00-243-0562

Characteristic Specifications
(NON-CORE DATA) CIRCUIT CONSTRUCTION TYPE ELECTRONIC, VACUUM TUBE
MEASUREMENT RANGE 0.0 TO 1000.0 MEGOHMS SINGLE INDICATOR 1ST RANGE 0.0 TO 250.0 VOLTS, AC SINGLE INDICATOR 2ND RANGE 0.0 TO 500.0 VOLTS, DC SINGLE INDICATOR 3RD RANGE 0.0 TO 1000.0 VOLTS, DC SINGLE INDICATOR 4TH RANGE
ACCURACY IN PERCENT -2.0 TO 2.0 AT FULL SCALE SINGLE INDICATOR ALL RANGES
SCALE GRADUATION TYPE NONLINEAR SINGLE INDICATOR ALL RANGES
MOVEMENT TYPE MOVING COIL, PERMANENT MAGNET AND MOVING IRON VANE
SENSITIVITY RATING 1.0 MILLIAMPERES
POWER SOURCE INTERNAL
OPERATING VOLTAGE RATING IN VOLTS 1.5 DC NOMINAL
FREQUENCY RATING 15.000 HERTZ MINIMUM AND 1.600 KILOHERTZ MAXIMUM
PHASE SINGLE
STYLE DESIGNATOR D1 RECTANGULAR OR SQUARE
OVERALL HEIGHT 9.750 INCHES NOMINAL
OVERALL LENGTH 6.250 INCHES NOMINAL
OVERALL WIDTH 9.125 INCHES NOMINAL
SURFACE TREATMENT PAINT
FURNISHED ITEMS AND QUANTITY TEST LEAD SETS 2,BATTERIES 2 ELECTRON TUBES 6,PILOT LAMPS 2,FUSES 4,DC VOLT PROBE W/ISOLATION RESISTOR 1,AC VOLT PROBE 1
FEATURES PROVIDED PORTABLE
MANUFACTURERS CODE 81349
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE TS-505/U

Restrictions/Controls & Freight Information | NSN 6625-00-243-0562

Category Code Description
Hazardous Material Indicator CodePThere is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product
Demilitarization Code:ANon-Munitions List Item/ Non-Strategic List Item - Demilitarization not required.
Precious Metals Indicator Code:AItem does not contain precious metal
Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Automatic Data Processing Equipment:0Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9)
Category Code Description
NMF Description 136740 METERS ELEC/PARTS SUB1
Less than car load rating
Less than truck load rating J 100.2
Water commodity Code 657 unknown
Originating Activity Code XX
Air Dimension Code A Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Air Commodity
Air Special Handling Q Extremely fragile items including delicate instruments.
Special Handling Code Q unknonwn
HAZMAT
Type of Cargo Z No special type of cargo code applicable