Product Details | VOLTMETER

6625-00-223-5237 An instrument which measures electrical potential and is calibrated in volts or any multiple and/or submultiple thereof. The value may be expressed by means of a pointer and calibrated dial or a digital readout display.

Part Alternates: UNIVERSITY, 6625-00-223-5237, 00-223-5237, 6625002235237, 002235237

Instruments and Laboratory Equipment | Electrical and Electronic Properties Measuring and Testing Instruments

Supply Group (FSG) NSN Assign. NIIN
66 01 JAN 1963 00-223-5237

Drawings & Photos | NSN 6625-00-223-5237


Cross Reference | NSN 6625-00-223-5237

Part Number Cage Code Manufacturer
UNIVERSITY 16665 SINGER CO THE INSTRUMENTATION DIV

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 6625-00-223-5237

Technical Data | NSN 6625-00-223-5237

Characteristic Specifications
MEASUREMENT RANGE 0.0 TO 150.0 VOLTS, AC SINGLE INDICATOR 1ST RANGE 0.0 TO 300.0 VOLTS, AC SINGLE INDICATOR 2ND RANGE 0.0 TO 150.0 VOLTS, DC SINGLE INDICATOR 3RD RANGE 0.0 TO 300.0 VOLTS, DC SINGLE INDICATOR 4TH RANGE
ACCURACY IN PERCENT -0.8 TO 0.8 AT FULL SCALE SINGLE INDICATOR ALL RANGES
DIAL SCALE MARKING COLOR BLACK SINGLE INDICATOR SINGLE RANGE
BACKGROUND COLOR WHITE SINGLE INDICATOR SINGLE RANGE
MOVEMENT TYPE MOVING COIL, PERMANENT MAGNET AND MOVING IRON VANE
FREQUENCY RESPONSE RANGE 0.000 TO 7.000 KILOHERTZ
CIRCUIT ATTACHMENT METHOD AND QUANTITY 2 BINDING POST
SENSITIVITY RATING 150000.0 OHMS PER VOLT
CIRCUIT CURRENT FOR WHICH DESIGNED AC AND DC
STYLE DESIGNATOR D1 RECTANGULAR OR SQUARE
OVERALL HEIGHT 5.000 INCHES NOMINAL
OVERALL LENGTH 5.250 INCHES NOMINAL
OVERALL WIDTH 2.625 INCHES NOMINAL
MATERIAL PLASTIC
FEATURES PROVIDED ZERO ADJUSTER

Restrictions/Controls & Freight Information | NSN 6625-00-223-5237

Category Code Description
Shelf-Life Code:0Nondeteriorative
Hazardous Material Indicator CodePThere is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product
Demilitarization Code:QStrategic List Item (SLI). Demilitarization not required. SLI are non-MLI(Munitions List Items) controlled by the U.S. Dept. of Commerce through the Export Administration Regulations (EAR) and indicated on the Commerce Control List (CCL). Each CCL entry is preceded by a four-digit Export Control Commerce Control List Item (CCLI) – MUT to the point of scrap required outside the United States. Inside the United States, MUT is required when the DEMIL integrity code (IC) is “3” and MUT is not required when the DEMIL IC is “6.”
Controlled Inventory Item Code:UUNCLASSIFIED
Precious Metals Indicator Code:AItem does not contain precious metal
Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Automatic Data Processing Equipment:0Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9)
Category Code Description
NMF Description 061700 ELEC APPLIANCES/INSTRUMENTS NOI
Less than car load rating M 85
Less than truck load rating A 400.0
Water commodity Code 72E unknown
Originating Activity Code XX
Air Dimension Code A Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Air Commodity H Signal Corps supplies and equipment, including radio equipment and supplies, communications equipment and supplies, electrical equipment and supplies, etc.
Air Special Handling Z No special handling required.
Special Handling Code 9 unknonwn
HAZMAT
Type of Cargo Z No special type of cargo code applicable

Management | NSN 6625-00-223-5237

Category Code Description
Materiel Management Aggregation CodeRHTG:AUTO TEST EQUIPMENT/AUTO TEST SYSTEMS (ATE/ATS) (FSC RESIDUAL MMAC)
Price ValidationX The current standard price has been validated and the previous price was erroneous.
  • The item was overpriced and the contractor has refunded the overcharge or DoD activities did not actually pay the previous price. The price paid is within the analyzed acceptable range.
  • If the difference from the previous price exceeds $99.99, or if the price change exceeds 500 percent and the extended value of any affected transaction exceeds $99.99, then reverse-post procedures will apply where the stock fund has overcharged unit O&M Funds. These corrections will be limited to the current fiscal year.
    • ZOP or Standard Price challenges are permissible, but should be supported by adequate justification
Budget CodeY variousO & M:AF centrally procured equipment items. They are separate, primary end items (other than the weapon system itself) needed by a user to perform an assigned mission. They are nonexpendable items (ERRCD NF or ND) which are not consumed in use, and they do not lose their original identity during periods of use by incorporation into, or attachment to another assembly.
Source of SupplyFLZWarner Robins Air Logistics Center
Robins AFB, GA 31098-5609
AgencyDFDepartment of the Air Force
Service OrganizationLLead Service - 22 (Repairable)
ReparabilitySAF Equipment Management System (AFEMS)
Acquisition Advice CodesVTERMINAL ITEM # Identifies items in stock, but future procurement is not authorized. Requisitions may continue to be submitted until stocks are exhausted. Preferred item National Stock Number is normally provided by application of the phrase: When Exhausted Use (NSN). Requisitions will be submitted in accordance with IMM/Service requisitioning procedures as applicable.
Controlled Item CodeUUNCLASSIFIED
Shelf Life Code0Nondeteriorative
Purchasing QTY
UOM
1
EA : Each