Product Details | VOLTMETER

6625-00-005-8577 An instrument which measures electrical potential and is calibrated in volts or any multiple and/or submultiple thereof. The value may be expressed by means of a pointer and calibrated dial or a digital readout display.

Part Alternates: 6A, 6625-00-005-8577, 00-005-8577, 6625000058577, 000058577

Instruments and Laboratory Equipment | Electrical and Electronic Properties Measuring and Testing Instruments

Supply Group (FSG) NSN Assign. NIIN
66 19 JUN 1972 00-005-8577

Drawings & Photos | NSN 6625-00-005-8577


Cross Reference | NSN 6625-00-005-8577

Part Number Cage Code Manufacturer
6A 09435 HOLT INSTRUMENT LABORATORIES, LLC DBA HOLT INSTRUMENT DIVISION

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 6625-00-005-8577

Technical Data | NSN 6625-00-005-8577

Characteristic Specifications
MEASUREMENT RANGE 0.0 TO 0.5 VOLTS, AC SINGLE INDICATOR 1ST RANGE 0.0 TO 1.0 VOLTS, AC SINGLE INDICATOR 2ND RANGE 0.0 TO 1.5 VOLTS, AC SINGLE INDICATOR 3RD RANGE 0.0 TO 3.0 VOLTS, AC SINGLE INDICATOR 4TH RANGE 0.0 TO 5.0 VOLTS, AC SINGLE INDICATOR 5TH RANGE 0.0 TO 10.0 VOLTS, AC SINGLE INDICATOR 6TH RANGE 0.0 TO 15.0 VOLTS, AC SINGLE INDICATOR 7TH RANGE 0.0 TO 30.0 VOLTS, AC SINGLE INDICATOR 8TH RANGE 0.0 TO 50.0 VOLTS, AC SINGLE INDICATOR 9TH RANGE 0.0 TO 100.0 VOLTS, AC SINGLE INDICATOR 10TH RANGE
SCALE SELECTION METHOD SWITCH
POWER SOURCE EXTERNAL
CIRCUIT CURRENT FOR WHICH DESIGNED AC
OPERATING VOLTAGE RATING IN VOLTS 105.0 AC MINIMUM AND 115.0 AC MAXIMUM
FREQUENCY RATING 50.000 HERTZ MINIMUM AND 400.000 HERTZ MAXIMUM
PHASE SINGLE
STYLE DESIGNATOR D1 RECTANGULAR OR SQUARE
OVERALL HEIGHT 6.500 INCHES NOMINAL
OVERALL LENGTH 15.875 INCHES NOMINAL
OVERALL WIDTH 10.500 INCHES NOMINAL
MANUFACTURERS CODE 09435
DESIGN CONTROL REFERENCE 6A

Restrictions/Controls & Freight Information | NSN 6625-00-005-8577

Category Code Description
Shelf-Life Code:0Nondeteriorative
Hazardous Material Indicator CodePThere is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product
Demilitarization Code:QStrategic List Item (SLI). Demilitarization not required. SLI are non-MLI(Munitions List Items) controlled by the U.S. Dept. of Commerce through the Export Administration Regulations (EAR) and indicated on the Commerce Control List (CCL). Each CCL entry is preceded by a four-digit Export Control Commerce Control List Item (CCLI) – MUT to the point of scrap required outside the United States. Inside the United States, MUT is required when the DEMIL integrity code (IC) is “3” and MUT is not required when the DEMIL IC is “6.”
Controlled Inventory Item Code:UUNCLASSIFIED
Precious Metals Indicator Code:UPrecious metal type is unknown
Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Category Code Description
NMF Description 061700 ELEC APPLIANCES/INSTRUMENTS NOI
Less than car load rating P 77.5
Less than truck load rating J 100.2
Water commodity Code 738 unknown
Originating Activity Code SE San Antonio Air Logistics Center
Kelly AFB, TX 78241-5000
Air Dimension Code A Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Air Commodity H Signal Corps supplies and equipment, including radio equipment and supplies, communications equipment and supplies, electrical equipment and supplies, etc.
Air Special Handling Q Extremely fragile items including delicate instruments.
Special Handling Code 9 unknonwn
HAZMAT
Type of Cargo 3 Electrostatic Sensitive Device (ESD), subject to damage caused by electrostatic discharge. (See DoD 4500.32-R, Volume 1, Appendix A, Section I for additional information on ESD devices).