Product Details | ELECTRICAL CONTACT

5999-00-819-2907 An item consisting of an electrically conductive material designed to furnish a surface which will physically and electrically meet another conducting surface for the purpose of transferring electrical energy and/or opening and closing circuits. Includes moving contacts which make and/or slide over stationary contacts or other stationary conductive material to a resulting fixed position. Excludes items which are used in conjunction with continually moving surfaces or which make contact by gripping action of the contact surfaces. See also CLIP, ELECTRICAL; CLAMP, ELECTRICAL; BRUSH, ELECTRICAL CONTACT; PLUG, TIP; and JACK, TIP.

Part Alternates: DPSM1616SCA106, DPSM1616SCA95, 81A43S1616, 5999-00-819-2907, 00-819-2907, 5999008192907, 008192907

Electrical and Electronic Equipment Components | Miscellaneous Electrical and Electronic Components

Supply Group (FSG) NSN Assign. NIIN
59 01 JAN 1962 00-819-2907

Drawings & Photos | NSN 5999-00-819-2907


Cross Reference | NSN 5999-00-819-2907

Part Number Cage Code Manufacturer
81A43S1616 38597 LOCKHEED MARTIN CORPORATION DBA LOCKHEED MARTIN
DPSM-1616SC (A106) 71468 ITT CORPORATION DBA I T T CANNON
DPSM1616SCA95 71468 ITT CORPORATION DBA I T T CANNON

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 5999-00-819-2907

Technical Data | NSN 5999-00-819-2907

Characteristic Specifications
STYLE DESIGNATOR A10 PIN CONTACT
OVERALL LENGTH 1.312 INCHES NOMINAL
OVERALL DIAMETER 0.135 INCHES NOMINAL
MATERIAL COPPER ALLOY CONTACT COPPER ALLOY BODY
SURFACE TREATMENT GOLD BODY AND CONTACT
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION MIL-G-45204 MIL SPEC SINGLE TREATMENT RESPONSE BODY AND CONTACT
TERMINAL TYPE AND QUANTITY 1 CRIMP END OPPOSITE CONTACT
MOUNTING METHOD FORCE FIT
PIN LENGTH 0.797 INCHES NOMINAL
PIN DIAMETER 0.062 INCHES NOMINAL
CABLE ENTRANCE DIAMETER 0.067 INCHES NOMINAL
III VOLTAGE RATING IN VOLTS 500.0 DC
III CURRENT RATING IN AMPS 20.0
III PRECIOUS MATERIAL GOLD
III PRECIOUS MATERIAL AND WEIGHT 0.005 GOLD GRAINS, TROY
III PRECIOUS MATERIAL AND LOCATION BODY AND CONTACT SURFACES GOLD

Restrictions/Controls & Freight Information | NSN 5999-00-819-2907

Category Code Description
Shelf-Life Code:0Nondeteriorative
Hazardous Material Indicator CodePThere is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product
Demilitarization Code:ANon-Munitions List Item/ Non-Strategic List Item - Demilitarization not required.
Controlled Inventory Item Code:UUNCLASSIFIED
Electro-static Discharge Susceptible:ANo known Electrostatic Discharge (ESD) or Electromagnetic Interference (EMI) sensitivity
Precious Metals Indicator Code:GItem contains gold
Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Category Code Description
NMF Description 061300 CIRCUIT BREAKER/SWITCH NOI
Less than car load rating
Less than truck load rating P 77.5
Water commodity Code 72D unknown
Originating Activity Code XX
Air Dimension Code A Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Air Commodity H Signal Corps supplies and equipment, including radio equipment and supplies, communications equipment and supplies, electrical equipment and supplies, etc.
Air Special Handling Z No special handling required.
Special Handling Code 9 unknonwn
HAZMAT
Type of Cargo Z No special type of cargo code applicable

Management | NSN 5999-00-819-2907

Category Code Description
Budget Code9 General Support DIV57X4921.070:Air Force decentrally managed expense items (ERRC XB3, XF-3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors.
Materiel Management Aggregation CodeEHSX:ELECTRONIC COMPONENTS
Price ValidationN The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
  • The price has not been analyzed or reviewed for accuracy.
  • ZOP or Standard price challenges are permissible, but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of ?L? or?F?,the case must be evaluated locally where purchased or fabricated.
Fund CodeSFStock fund applicable to items managed for the Air Force by the respective Inventory Control Point.
Source of SupplySMSDefense Logistics Agency
Enterprise Business Systems
AgencyDFDepartment of the Air Force
Service OrganizationFU.S. Air Force
ReparabilityNStock Fund (except Munitions)
Acquisition Advice CodesZINSURANCE/NUMERIC STOCKAGE OBJECTIVE ITEM # Items which may be required occasionally or intermittently, and prudence requires that a nominal quantity of materiel be stocked due to the essentiality or the lead time of the item. 1. The item is centrally managed, stocked, and issued. 2. Requisitions will be submitted in accordance with IMM/Service requisitioning procedures.
Controlled Item CodeUUNCLASSIFIED
Shelf Life Code0Nondeteriorative
Purchasing QTY
UOM
A
EA : Each
Category Code Description
Cognizance Codes9BNavy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Source of SupplySMSDefense Logistics Agency
Enterprise Business Systems
AgencyDNDepartment of the Navy
Service OrganizationNU.S. Navy
Acquisition Advice CodesVTERMINAL ITEM # Identifies items in stock, but future procurement is not authorized. Requisitions may continue to be submitted until stocks are exhausted. Preferred item National Stock Number is normally provided by application of the phrase: When Exhausted Use (NSN). Requisitions will be submitted in accordance with IMM/Service requisitioning procedures as applicable.
Controlled Item CodeUUNCLASSIFIED
Shelf Life Code0Nondeteriorative
Purchasing QTY
UOM
A
EA : Each