NSN 5985-01-621-8371 F5684100S, F5684-100S , 01-621-8371
Product Details | VARIABLE ATTENUATOR
5985-01-621-8371 A device for reducing the strength of an alternating current signal either continuously or in steps, without causing appreciable signal distortion, by maintaining substantially constant output and/or input impedance match. Continuously variable resistive devices must consist of at least two sections or one section with at least two rotating contacts. The item must have an overall attenuation rating. Includes tandem mounted variable resistors designed to function as an attenuator but whose terminals are not connected. See also RESISTOR, VAIABLE (as modified).
Part Alternates: F5684100S, F5684-100S , 5985-01-621-8371, 01-621-8371, 5985016218371, 016218371
Electrical and Electronic Equipment Components | Antennas, Waveguides, and Related Equipment
Supply Group (FSG) | NSN Assign. | NIIN | Item Name Code (INC) |
---|---|---|---|
59 | 2013261 | 01-621-8371 | 00838 ( ATTENUATOR, VARIABLE ) |
Cross Reference | NSN 5985-01-621-8371
Part Number | Cage Code | Manufacturer |
---|---|---|
F5684-100S | 09992 | ARRA INC |
Request a Quote
What Our Customers Say
Compare
Related Products | NSN 5985-01-621-8371
Technical Data | NSN 5985-01-621-8371
Characteristic | Specifications |
---|---|
FREQUENCY RANGE | 5.4 GIGAHERTZ MINIMUM AND |
VOLTAGE STANDING WAVE RATIO | 1.50 |
POWER RATING | 10.0 WATTS AVERAGE |
ATTENUATION PER STEP IN DECIBELS | 100.0 |
BODY DIAMETER | 3.000 INCHES NOMINAL |
SHAFT TYPE | ROUND |
SHAFT DIAMETER | 0.250 INCHES NOMINAL |
SHAFT LENGTH | 1.000 INCHES MAXIMUM |
TERMINAL TYPE AND QUANTITY | 2 CONNECTOR, COAXIAL, FEMALE |
COAXIAL CONNECTOR SERIES DESIGNATION | SMA |
MOUNTING FACILITY TYPE AND QUANTITY | 4 THREADED HOLE |
MOUNTING FACILITY SCREW THREAD SERIES DESIGNATOR | UNC |
MOUNTING FACILITY NOMINAL SCREW THREAD DIAMETER | 0.164 INCHES |
MOUNTING THREAD QUANTITY | 32.0 PER INCH |
MOUNTING FACILITY PATTERN | FOUR POSITION IN-LINE |
Restrictions/Controls & Freight Information | NSN 5985-01-621-8371
Category | Code | Description |
---|---|---|
Hazardous Material Indicator Code | P | There is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product |
Demilitarization Code: | A | Non-Munitions List Item/ Non-Strategic List Item - Demilitarization not required. |
Electro-static Discharge Susceptible: | A | No known Electrostatic Discharge (ESD) or Electromagnetic Interference (EMI) sensitivity |
Precious Metals Indicator Code: | A | Item does not contain precious metal |
Criticality Code: | X | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
Automatic Data Processing Equipment: | 0 | Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9) |
Category | Code | Description |
---|---|---|
No Freight Information |