NSN 5985-01-619-7568 CATTEN0100, CATTEN-0100 , 01-619-7568
Product Details | FIXED ATTENUATOR
5985-01-619-7568 A device for reducing the strength of an alternating current signal by a fixed or predetermined amount, without causing appreciable signal distortion, by maintaining correct impedance match.
Part Alternates: CATTEN0100, CATTEN-0100 , 5985-01-619-7568, 01-619-7568, 5985016197568, 016197568
Electrical and Electronic Equipment Components | Antennas, Waveguides, and Related Equipment
Supply Group (FSG) | NSN Assign. | NIIN | Item Name Code (INC) |
---|---|---|---|
59 | 2013168 | 01-619-7568 | 14224 ( ATTENUATOR, FIXED ) |
Cross Reference | NSN 5985-01-619-7568
Part Number | Cage Code | Manufacturer |
---|---|---|
CATTEN-0100 | 13454 | CRYSTEK CRYSTALS CORPORATION DBA CRYSTEK |
Request a Quote
What Our Customers Say
Compare
NSNs for Compare ( up to 4 ): Add 5985-01-619-7568
Related Products | NSN 5985-01-619-7568
Technical Data | NSN 5985-01-619-7568
Characteristic | Specifications |
---|---|
FREQUENCY RANGE | 3.0 HERTZ MAXIMUM |
POWER RATING | 1.0 WATTS PEAK |
OPERATING TEMP RANGE | -40.0 TO 85.0 DEG CELSIUS |
OVERALL LENGTH | 1.312 INCHES NOMINAL |
OVERALL HEIGHT | 0.435 INCHES NOMINAL |
MOUNTING METHOD | THREADED STUD |
MOUNTING HOLE/STUD QUANTITY | 1 |
SPECIAL FEATURES | 50 OHM |
PART NAME ASSIGNED BY CONTROLLING AGENCY | ATTENUATOR |
Restrictions/Controls & Freight Information | NSN 5985-01-619-7568
Category | Code | Description |
---|---|---|
Hazardous Material Indicator Code | P | There is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product |
Demilitarization Code: | Q | Strategic List Item (SLI). Demilitarization not required. SLI are non-MLI(Munitions List Items) controlled by the U.S. Dept. of Commerce through the Export Administration Regulations (EAR) and indicated on the Commerce Control List (CCL). Each CCL entry is preceded by a four-digit Export Control Commerce Control List Item (CCLI) – MUT to the point of scrap required outside the United States. Inside the United States, MUT is required when the DEMIL integrity code (IC) is “3” and MUT is not required when the DEMIL IC is “6.” |
Precious Metals Indicator Code: | A | Item does not contain precious metal |
Criticality Code: | X | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
Automatic Data Processing Equipment: | 0 | Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9) |
Category | Code | Description |
---|---|---|
No Freight Information |