Product Details | ANTENNA CONTROL UNIT

5985-01-600-9631 A hydraulic manifold which contains all fluid control valves for controlling hydraulic fluid to the hydraulic motor in the antenna drive unit on the mast, determining direction of antenna mast rotation and rotation speed. It also generates control signals for activating solenoids to raise or lower the antenna. For items consiting of less than complete hydraulic control system see ANTENNA CONTROL GROUP. EXCLUDES: ANTENNA GROUP; ANTENNA CONTROL SUBASSEMBLY; and ANTENNA CONTROL GROUP.

Part Alternates: 5985-01-600-9631, 01-600-9631, 5985016009631, 700466394, 016009631

Electrical and Electronic Equipment Components | Antennas, Waveguides, and Related Equipment

Supply Group (FSG) NSN Assign. NIIN
59 04 JAN 2012 01-600-9631

Cross Reference | NSN 5985-01-600-9631

Part Number Cage Code Manufacturer
700466394 1RHB2 AVAYA INC.

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 5985-01-600-9631

Technical Data | NSN 5985-01-600-9631

Characteristic Specifications
END ITEM IDENTIFICATION DECT R4 SYSTEM
SPECIAL FEATURES DECT IP RBS V2 W/INT ANTENNA
PART NAME ASSIGNED BY CONTROLLING AGENCY IP DECT BASE STATION

Restrictions/Controls & Freight Information | NSN 5985-01-600-9631

Category Code Description
Hazardous Material Indicator CodePThere is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product
Demilitarization Code:QStrategic List Item (SLI). Demilitarization not required. SLI are non-MLI(Munitions List Items) controlled by the U.S. Dept. of Commerce through the Export Administration Regulations (EAR) and indicated on the Commerce Control List (CCL). Each CCL entry is preceded by a four-digit Export Control Commerce Control List Item (CCLI) – MUT to the point of scrap required outside the United States. Inside the United States, MUT is required when the DEMIL integrity code (IC) is “3” and MUT is not required when the DEMIL IC is “6.”
Precious Metals Indicator Code:AItem does not contain precious metal
Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Automatic Data Processing Equipment:0Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9)
Category Code Description
No Freight Information