Product Details | VARIABLE ATTENUATOR

5985-01-484-6694 A device for reducing the strength of an alternating current signal either continuously or in steps, without causing appreciable signal distortion, by maintaining substantially constant output and/or input impedance match. Continuously variable resistive devices must consist of at least two sections or one section with at least two rotating contacts. The item must have an overall attenuation rating. Includes tandem mounted variable resistors designed to function as an attenuator but whose terminals are not connected. See also RESISTOR, VAIABLE (as modified).

Part Alternates: 24833, 5985-01-484-6694, 01-484-6694, 5985014846694, 014846694

Electrical and Electronic Equipment Components | Antennas, Waveguides, and Related Equipment

Supply Group (FSG) NSN Assign. NIIN
59 03 MAY 2001 01-484-6694

Drawings & Photos | NSN 5985-01-484-6694


Cross Reference | NSN 5985-01-484-6694

Part Number Cage Code Manufacturer
24833 99899 L-3 COMMUNICATIONS CORPORATION DBA NARDA MICROWAVE EAST

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 5985-01-484-6694

Technical Data | NSN 5985-01-484-6694

Characteristic Specifications
FREQUENCY RANGE 8.000 GIGAHERTZ MINIMUM AND 12.000 GIGAHERTZ MAXIMUM
VOLTAGE STANDING WAVE RATIO 1.60
POWER RATING 1.0 WATTS AVERAGE AND 10.0 WATTS PEAK
INSERTION LOSS AT MINIMUM ATTENUATION IN MAXIMUM DECIBELS 0.5
OVERALL ATTENUATION RANGE IN DECIBELS 0.0 TO 20.0
OVERALL ATTENUATION ACCURACY IN DECIBELS -2.50 TO 2.50
BODY STYLE 22A COAXIAL TYPE
OVERALL LENGTH 1.600 INCHES MINIMUM AND 1.900 INCHES MAXIMUM
OVERALL HEIGHT 2.150 INCHES MINIMUM AND 2.350 INCHES MAXIMUM
OVERALL WIDTH 0.470 INCHES MINIMUM AND 0.530 INCHES MAXIMUM
ADJUSTMENT DEVICE TYPE AND QUANTITY 1 SLOTTED SCREW
TERMINAL TYPE AND QUANTITY 2 CONNECTOR, COAXIAL, FEMALE
COAXIAL CONNECTOR SERIES DESIGNATION SMA
MOUNTING FACILITY TYPE AND QUANTITY 4 THREADED HOLE
MOUNTING FACILITY SCREW THREAD SERIES DESIGNATOR UNC
MOUNTING FACILITY NOMINAL SCREW THREAD DIAMETER 0.086 INCHES
MOUNTING THREAD QUANTITY 56 PER INCH
MOUNTING THREAD TOLERANCE CLASS 2B INTERNAL
MOUNTING FACILITY PATTERN FOUR POSITION RECTANGULAR
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH 0.870 INCHES MINIMUM AND 0.880 INCHES MAXIMUM
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH 1.620 INCHES MINIMUM AND 1.630 INCHES MAXIMUM

Restrictions/Controls & Freight Information | NSN 5985-01-484-6694

Category Code Description
Hazardous Material Indicator CodePThere is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product
Demilitarization Code:BMunitions List Item - Mutilation (MUT) to the point of scrap required. (Formerly: Demilitarization not required. Trade Security Controls (TSCs) required at disposition.)
Electro-static Discharge Susceptible:ANo known Electrostatic Discharge (ESD) or Electromagnetic Interference (EMI) sensitivity
Precious Metals Indicator Code:AItem does not contain precious metal
Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Automatic Data Processing Equipment:0Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9)
Category Code Description
No Freight Information