Product Details | VARIABLE ATTENUATOR

5985-01-288-3266 A device for reducing the strength of an alternating current signal either continuously or in steps, without causing appreciable signal distortion, by maintaining substantially constant output and/or input impedance match. Continuously variable resistive devices must consist of at least two sections or one section with at least two rotating contacts. The item must have an overall attenuation rating. Includes tandem mounted variable resistors designed to function as an attenuator but whose terminals are not connected. See also RESISTOR, VAIABLE (as modified).

Part Alternates: 7912328-00, 8435S010, 8435-S010, 5985-01-288-3266, 01-288-3266, 5985012883266, 791232800, 012883266

Electrical and Electronic Equipment Components | Antennas, Waveguides, and Related Equipment

Supply Group (FSG) NSN Assign. NIIN
59 05 NOV 1988 01-288-3266

Cross Reference | NSN 5985-01-288-3266

Part Number Cage Code Manufacturer
7912328-00 06401 L-3 COMMUNICATIONS CORPORATION DBA COMMUNICATIONS SYSTEMS WEST
8435-S010 96341 COBHAM ELECTRONIC SYSTEMS INC. DBA COBHAM DEFENSE ELECTRONICS

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 5985-01-288-3266

Technical Data | NSN 5985-01-288-3266

Characteristic Specifications
APPLICATION DESIGN TRANSMISSION LINE
FREQUENCY RANGE 8.000 GIGAHERTZ MINIMUM AND 12.000 GIGAHERTZ MAXIMUM
POWER RATING 100.0 MILLIWATTS PEAK
INSERTION LOSS AT MINIMUM ATTENUATION IN MAXIMUM DECIBELS 3.200
OVERALL ATTENUATION RANGE IN DECIBELS 0.000 TO 12.000
MANUFACTURERS CODE 96341
DESIGN CONTROL REFERENCE 8435-S010

Restrictions/Controls & Freight Information | NSN 5985-01-288-3266

Category Code Description
Shelf-Life Code:0Nondeteriorative
Hazardous Material Indicator CodePThere is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product
Demilitarization Code:ANon-Munitions List Item/ Non-Strategic List Item - Demilitarization not required.
Controlled Inventory Item Code:UUNCLASSIFIED
Precious Metals Indicator Code:AItem does not contain precious metal
Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Automatic Data Processing Equipment:0Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9)
Category Code Description
No Freight Information