NSN 5985-01-131-1773 MA211, 01-131-1773, 011311773
Product Details | VARIABLE ATTENUATOR
5985-01-131-1773 A device for reducing the strength of an alternating current signal either continuously or in steps, without causing appreciable signal distortion, by maintaining substantially constant output and/or input impedance match. Continuously variable resistive devices must consist of at least two sections or one section with at least two rotating contacts. The item must have an overall attenuation rating. Includes tandem mounted variable resistors designed to function as an attenuator but whose terminals are not connected. See also RESISTOR, VAIABLE (as modified).
Part Alternates: MA211, 5985-01-131-1773, 01-131-1773, 5985011311773, 011311773
Electrical and Electronic Equipment Components | Antennas, Waveguides, and Related Equipment
Supply Group (FSG) | NSN Assign. | NIIN | Item Name Code (INC) |
---|---|---|---|
59 | 05 MAY 1982 | 01-131-1773 | 00838 ( ATTENUATOR, VARIABLE ) |
Cross Reference | NSN 5985-01-131-1773
Part Number | Cage Code | Manufacturer |
---|---|---|
MA211 | 23042 | TRILITHIC, INC. |
Request a Quote
What Our Customers Say
Compare
Related Products | NSN 5985-01-131-1773
Technical Data | NSN 5985-01-131-1773
Characteristic | Specifications |
---|---|
APPLICATION DESIGN | TRANSMISSION LINE |
FREQUENCY RANGE | 0.000 HERTZ MINIMUM AND 1.000 GIGAHERTZ MAXIMUM |
VOLTAGE STANDING WAVE RATIO | 1.30 |
INSERTION LOSS AT MINIMUM ATTENUATION IN MAXIMUM DECIBELS | 0.3 |
ATTENUATION VARIATION METHOD | CONTINUOUS |
ADJUSTMENT DEVICE TYPE AND QUANTITY | 1 KNOB |
TERMINAL TYPE AND QUANTITY | 2 CONNECTOR, COAXIAL, MALE |
COAXIAL CONNECTOR SERIES DESIGNATION | SMA |
III OPERATING TEMP RANGE | -40.0 TO 85.0 DEG CELSIUS |
Restrictions/Controls & Freight Information | NSN 5985-01-131-1773
Category | Code | Description |
---|---|---|
Hazardous Material Indicator Code | P | There is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product |
Demilitarization Code: | D | Munitions List Item or Commerce Control List Item. Demilitarization required. Total destruction of the item and components so as to preclude restoration or repair to a usable condition by melting, cutting, tearing, scratching, crushing, breaking, punching, neutralizing, etc. (As an alternate, burial or deep water dumping may be used when coordinated with the DoD Demilitarization Program Office.) |
Precious Metals Indicator Code: | U | Precious metal type is unknown |
Criticality Code: | X | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
Category | Code | Description |
---|---|---|
No Freight Information |