Product Details | VARIABLE ATTENUATOR

5985-01-114-1969 A device for reducing the strength of an alternating current signal either continuously or in steps, without causing appreciable signal distortion, by maintaining substantially constant output and/or input impedance match. Continuously variable resistive devices must consist of at least two sections or one section with at least two rotating contacts. The item must have an overall attenuation rating. Includes tandem mounted variable resistors designed to function as an attenuator but whose terminals are not connected. See also RESISTOR, VAIABLE (as modified).

Part Alternates: AC115A0911, AC115A-09-11, AC115A911, AC115A9-11, 352250025706, 5985-01-114-1969, 01-114-1969, 5985011141969, 011141969

Electrical and Electronic Equipment Components | Antennas, Waveguides, and Related Equipment

Supply Group (FSG) NSN Assign. NIIN
59 13 JUN 1981 01-114-1969

Cross Reference | NSN 5985-01-114-1969

Part Number Cage Code Manufacturer
352250025706 H0203 THALES NEDERLAND B.V. DBA THALES LAND & JOINT SYSTEMS
AC115A-09-11 93459 AEROFLEX / WEINSCHEL, INC.
AC115A9-11 93459 AEROFLEX / WEINSCHEL, INC.
AC115A9-11 C1834 KONTRON AG

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 5985-01-114-1969

Technical Data | NSN 5985-01-114-1969

Characteristic Specifications
APPLICATION DESIGN TRANSMISSION LINE
FREQUENCY RANGE 0.000 HERTZ MINIMUM AND 4.000 GIGAHERTZ MAXIMUM
VOLTAGE STANDING WAVE RATIO 1.20
POWER RATING 2.0 WATTS AVERAGE AND 200.0 WATTS PEAK
OVERALL ATTENUATION RANGE IN DECIBELS 0.0 TO 9.0
ATTENUATION VARIATION METHOD STEPPED
ATTENUATION PER STEP IN DECIBELS 1.0
OVERALL LENGTH 1.880 INCHES NOMINAL
OVERALL HEIGHT 3.250 INCHES NOMINAL
OVERALL WIDTH 3.130 INCHES NOMINAL
SPECIAL FEATURES 1 ADJUSTING DEVICE
III OPERATING TEMP RANGE 0.0 TO 54.0 DEG CELSIUS

Restrictions/Controls & Freight Information | NSN 5985-01-114-1969

Category Code Description
Hazardous Material Indicator CodePThere is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product
Demilitarization Code:DMunitions List Item or Commerce Control List Item. Demilitarization required. Total destruction of the item and components so as to preclude restoration or repair to a usable condition by melting, cutting, tearing, scratching, crushing, breaking, punching, neutralizing, etc. (As an alternate, burial or deep water dumping may be used when coordinated with the DoD Demilitarization Program Office.)
Precious Metals Indicator Code:UPrecious metal type is unknown
Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Category Code Description
No Freight Information