Product Details | VARIABLE ATTENUATOR

5985-00-914-2706 A device for reducing the strength of an alternating current signal either continuously or in steps, without causing appreciable signal distortion, by maintaining substantially constant output and/or input impedance match. Continuously variable resistive devices must consist of at least two sections or one section with at least two rotating contacts. The item must have an overall attenuation rating. Includes tandem mounted variable resistors designed to function as an attenuator but whose terminals are not connected. See also RESISTOR, VAIABLE (as modified).

Part Alternates: 52292, 5985-00-914-2706, 00-914-2706, 5985009142706, 009142706

Electrical and Electronic Equipment Components | Antennas, Waveguides, and Related Equipment

Supply Group (FSG) NSN Assign. NIIN
59 01 JAN 1960 00-914-2706

Cross Reference | NSN 5985-00-914-2706

Part Number Cage Code Manufacturer
52292 09017 EDO

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 5985-00-914-2706

Technical Data | NSN 5985-00-914-2706

Characteristic Specifications
APPLICATION DESIGN TRANSMISSION LINE
IMPEDANCE RATING IN OHMS 50.0 INPUT-OUTPUT
POWER RATING 10.0 WATTS AVERAGE
OVERALL ATTENUATION RANGE IN DECIBELS 0.0 TO 40.0
OVERALL ATTENUATION ACCURACY IN DECIBELS -0.60 TO 0.60
ATTENUATION VARIATION METHOD CONTINUOUS
MOUNTING FACILITY TYPE AND QUANTITY 6 UNTHREADED HOLE
UNTHREADED MOUNTING HOLE DIAMETER 0.221 INCHES NOMINAL
MANUFACTURERS CODE 09017
DESIGN CONTROL REFERENCE 52292

Restrictions/Controls & Freight Information | NSN 5985-00-914-2706

Category Code Description
Shelf-Life Code:0Nondeteriorative
Hazardous Material Indicator CodePThere is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product
Demilitarization Code:BMunitions List Item - Mutilation (MUT) to the point of scrap required. (Formerly: Demilitarization not required. Trade Security Controls (TSCs) required at disposition.)
Controlled Inventory Item Code:UUNCLASSIFIED
Precious Metals Indicator Code:AItem does not contain precious metal
Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Automatic Data Processing Equipment:0Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9)
Category Code Description
NMF Description 061700 ELEC APPLIANCES/INSTRUMENTS NOI
Less than car load rating W Rating Variable
Less than truck load rating W Rating Variable
Water commodity Code 658 unknown
Originating Activity Code XX
Air Dimension Code A Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Air Commodity H Signal Corps supplies and equipment, including radio equipment and supplies, communications equipment and supplies, electrical equipment and supplies, etc.
Air Special Handling Z No special handling required.
Special Handling Code 9 unknonwn
HAZMAT
Type of Cargo Z No special type of cargo code applicable

Management | NSN 5985-00-914-2706

Category Code Description
Cognizance Codes7HDepot level reparable shipboard and base equipment, assemblies, components and repair parts related to Naval Sea Systems Command equipment
Naval Inventory Control Point, Mechanicsburg
Special Material Content9 Non-Hazardous or Non-Sensitive Item, does not require hazardous or special handling, packaging or precautions
Source of SupplyNRPNAVICP-ERP
700 Robbins Avenue
Philadelphia, PA 19111-5098
AgencyDNDepartment of the Navy
Service OrganizationLLead Service - 22 (Repairable)
ReparabilityHDepot Level Reparable
Acquisition Advice CodesPRESTRICTED REQUISITION - SECURITY ASSISTANCE PROGRAM (SAP) 1. Indicates item is stocked or acquired only for SAP (replaces Military Assistance Program (MAP)) requirements, or 2. Indicates item is nonstocked and materiel is ordered from the contractor for shipment directly to the foreign government. 3. Base, post, camp, or station will not requisition.
Controlled Item CodeUUNCLASSIFIED
Shelf Life Code0Nondeteriorative