NSN 5985-00-909-6497 WL600, 0033D31, 00-909-6497
Product Details | VARIABLE ATTENUATOR
5985-00-909-6497 A device for reducing the strength of an alternating current signal either continuously or in steps, without causing appreciable signal distortion, by maintaining substantially constant output and/or input impedance match. Continuously variable resistive devices must consist of at least two sections or one section with at least two rotating contacts. The item must have an overall attenuation rating. Includes tandem mounted variable resistors designed to function as an attenuator but whose terminals are not connected. See also RESISTOR, VAIABLE (as modified).
Part Alternates: WL600, 0033D31, 5985-00-909-6497, 00-909-6497, 5985009096497, 009096497
Electrical and Electronic Equipment Components | Antennas, Waveguides, and Related Equipment
Supply Group (FSG) | NSN Assign. | NIIN | Item Name Code (INC) |
---|---|---|---|
59 | 20 JUN 1966 | 00-909-6497 | 00838 ( ATTENUATOR, VARIABLE ) |
Request a Quote
What Our Customers Say
Compare
Related Products | NSN 5985-00-909-6497
Technical Data | NSN 5985-00-909-6497
Characteristic | Specifications |
---|---|
APPLICATION DESIGN | AUDIO |
SCHEMATIC DIAGRAM DESIGNATOR | 5D BALANCED LADDER |
IMPEDANCE RATING IN OHMS | 600.0 INPUT |
OVERALL ATTENUATION RANGE IN DECIBELS | ANY ACCEPTABLE |
ATTENUATION VARIATION METHOD | CONTINUOUS |
BODY STYLE | 33A CYLINDRICAL W/SIDE TERMINALS |
OVERALL LENGTH | 3.093 INCHES NOMINAL |
OVERALL WIDTH | 1.156 INCHES NOMINAL |
BODY DIAMETER | 1.093 INCHES NOMINAL |
BUSHING LENGTH | 0.343 INCHES NOMINAL |
BODY LENGTH | 1.281 INCHES NOMINAL |
ADJUSTMENT DEVICE TYPE AND QUANTITY | 1 SHAFT |
SHAFT TYPE | ROUND, FLATTED |
FIRST FLAT LENGTH | 0.343 INCHES NOMINAL |
FLAT HEIGHT | ANY ACCEPTABLE |
SHAFT DIAMETER | 0.249 INCHES NOMINAL |
SHAFT LENGTH | 1.468 INCHES NOMINAL |
TERMINAL TYPE AND QUANTITY | 3 TAB, SOLDER LUG |
MOUNTING FACILITY TYPE AND QUANTITY | 2 THREADED BUSHING |
MOUNTING FACILITY SCREW THREAD SERIES DESIGNATOR | UNF |
MOUNTING FACILITY NOMINAL SCREW THREAD DIAMETER | 0.375 INCHES |
MOUNTING THREAD QUANTITY | 32 PER INCH |
Restrictions/Controls & Freight Information | NSN 5985-00-909-6497
Category | Code | Description |
---|---|---|
Shelf-Life Code: | 0 | Nondeteriorative |
Hazardous Material Indicator Code | P | There is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product |
Demilitarization Code: | A | Non-Munitions List Item/ Non-Strategic List Item - Demilitarization not required. |
Controlled Inventory Item Code: | U | UNCLASSIFIED |
Precious Metals Indicator Code: | U | Precious metal type is unknown |
Criticality Code: | X | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
Category | Code | Description |
---|---|---|
NMF Description | 061700 | ELEC APPLIANCES/INSTRUMENTS NOI |
Less than car load rating | ||
Less than truck load rating | J | 100.2 |
Water commodity Code | 658 | unknown |
Originating Activity Code | TX | Defense Supply Center Columbus Columbus, OH 43218 |
Air Dimension Code | A | Shipment is not a consolidation and does not exceed 72 inches in any dimension. |
Air Commodity | H | Signal Corps supplies and equipment, including radio equipment and supplies, communications equipment and supplies, electrical equipment and supplies, etc. |
Air Special Handling | Z | No special handling required. |
Special Handling Code | 9 | unknonwn |
HAZMAT | ||
Type of Cargo | Z | No special type of cargo code applicable |
Management | NSN 5985-00-909-6497
Category | Code | Description |
---|---|---|
Materiel Category and Inventory Manager | Q | Electronics Materiel (DLA/GSA Items) |
Appropriation and Budget Activity | 2 | Stock Fund Secondary Items |
Management Inventory Segment | 2 | NONREPARABLE ITEMS (Exclusive of Insurance and Provisioning Items). This code will be used to identify items which are not reparable. |
Specific Group/Generic Code | 0 | Medical Materiel |
Weapons Systems/End Item or Homogeneous Group | 00 | DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item |
Accounting Requirements Code | X | Expendable item. An item of Army property coded with an ARC of ?X? in the AMDF. Expendable items require no formal accountability after issue from a stock record account. Commercial and fabricated items similar to items coded ?X? in the AMDF are considered expendable items. |
Source of Supply | SMS | Defense Logistics Agency Enterprise Business Systems |
Agency | DA | Department of the Army |
Service Organization | A | U.S. Army |
Reparability | Z | This is a nonreparable item. If condemned or economically unserviceable, then dispose at the level authorized replace the item. |
Acquisition Advice Codes | J | NOT STOCKED, CENTRALLY PROCURED # (NON-STOCKED ITEMS) IMM/Service centrally managed but not stocked item. Procurement will be initiated only after receipt of a requisition. |
Controlled Item Code | U | UNCLASSIFIED |
Shelf Life Code | 0 | Nondeteriorative |
Purchasing | QTY UOM |
1 EA : Each |
Category | Code | Description |
---|---|---|
Cognizance Codes | 9B | Navy-owned stocks of DLA material Naval Inventory Control Point, Mechanicsburg |
Source of Supply | SMS | Defense Logistics Agency Enterprise Business Systems |
Agency | DN | Department of the Navy |
Service Organization | N | U.S. Navy |
Acquisition Advice Codes | J | NOT STOCKED, CENTRALLY PROCURED # (NON-STOCKED ITEMS) IMM/Service centrally managed but not stocked item. Procurement will be initiated only after receipt of a requisition. |
Controlled Item Code | U | UNCLASSIFIED |
Shelf Life Code | 0 | Nondeteriorative |
Purchasing | QTY UOM |
1 EA : Each |