Product Details | VARIABLE ATTENUATOR

5985-00-846-6312 A device for reducing the strength of an alternating current signal either continuously or in steps, without causing appreciable signal distortion, by maintaining substantially constant output and/or input impedance match. Continuously variable resistive devices must consist of at least two sections or one section with at least two rotating contacts. The item must have an overall attenuation rating. Includes tandem mounted variable resistors designed to function as an attenuator but whose terminals are not connected. See also RESISTOR, VAIABLE (as modified).

Part Alternates: TMP2001, 0123766, 01-23766, 5985-00-846-6312, 00-846-6312, 5985008466312, 008466312

Electrical and Electronic Equipment Components | Antennas, Waveguides, and Related Equipment

Supply Group (FSG) NSN Assign. NIIN
59 01 JAN 1962 00-846-6312

Drawings & Photos | NSN 5985-00-846-6312


Cross Reference | NSN 5985-00-846-6312

Part Number Cage Code Manufacturer
01-23766 89244 PICKARD AND BURNS INC
TMP2001 00798 MUTRON CORP

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 5985-00-846-6312

Technical Data | NSN 5985-00-846-6312

Characteristic Specifications
APPLICATION DESIGN WAVEGUIDE
FREQUENCY RANGE 8.500 GIGAHERTZ MINIMUM AND 9.600 GIGAHERTZ MAXIMUM
VOLTAGE STANDING WAVE RATIO 1.05
POWER RATING 1.0 WATTS AVERAGE
INSERTION LOSS AT MINIMUM ATTENUATION IN MAXIMUM DECIBELS 0.5
OVERALL ATTENUATION RANGE IN DECIBELS 0.5 TO 22.0
OVERALL ATTENUATION ACCURACY IN DECIBELS -0.215 TO 0.215
ATTENUATION VARIATION METHOD CONTINUOUS
BODY STYLE 41A IRREGULAR
OVERALL LENGTH 2.188 INCHES NOMINAL
OVERALL WIDTH 1.875 INCHES NOMINAL
TERMINAL TYPE AND QUANTITY 2 FLANGE
MOUNTING FACILITY TYPE AND QUANTITY 4 TERMINAL W/MOUNTING HOLES
DISTANCE BETWEEN MOUNTING FACILITY CENTERS 0.169 INCHES NOMINAL
III PRECIOUS MATERIAL RHODIUM AND SILVER
III PRECIOUS MATERIAL AND LOCATION OVERALL SURFACES RHODIUM AND OVERALL SURFACES SILVER
III FSC APPLICATION DATA ANTENNAS,WAVEGUIDES,AND RELATED EQUIPMENT

Restrictions/Controls & Freight Information | NSN 5985-00-846-6312

Category Code Description
Hazardous Material Indicator CodePThere is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product
Demilitarization Code:ANon-Munitions List Item/ Non-Strategic List Item - Demilitarization not required.
Precious Metals Indicator Code:PItem contains platinum family metals
Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Automatic Data Processing Equipment:0Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9)
Category Code Description
NMF Description 061700 ELEC APPLIANCES/INSTRUMENTS NOI
Less than car load rating
Less than truck load rating W Rating Variable
Water commodity Code 723 unknown
Originating Activity Code XX
Air Dimension Code A Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Air Commodity H Signal Corps supplies and equipment, including radio equipment and supplies, communications equipment and supplies, electrical equipment and supplies, etc.
Air Special Handling Z No special handling required.
Special Handling Code 9 unknonwn
HAZMAT
Type of Cargo Z No special type of cargo code applicable