Product Details | VARIABLE ATTENUATOR

5985-00-815-7434 A device for reducing the strength of an alternating current signal either continuously or in steps, without causing appreciable signal distortion, by maintaining substantially constant output and/or input impedance match. Continuously variable resistive devices must consist of at least two sections or one section with at least two rotating contacts. The item must have an overall attenuation rating. Includes tandem mounted variable resistors designed to function as an attenuator but whose terminals are not connected. See also RESISTOR, VAIABLE (as modified).

Part Alternates: M0DEL200, M0DEL20-0, 9954981, 995498-1, 430B, 5985-00-815-7434, 00-815-7434, 5985008157434, 008157434

Electrical and Electronic Equipment Components | Antennas, Waveguides, and Related Equipment

Supply Group (FSG) NSN Assign. NIIN
59 01 JAN 1962 00-815-7434

Drawings & Photos | NSN 5985-00-815-7434


Cross Reference | NSN 5985-00-815-7434

Part Number Cage Code Manufacturer
430B 80138 KAY ELEMETRICS CORPORATION
995498-1 82577 RAYTHEON COMPANY DBA RAYTHEON
M0DEL20-0 80138 KAY ELEMETRICS CORPORATION

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 5985-00-815-7434

Technical Data | NSN 5985-00-815-7434

Characteristic Specifications
APPLICATION DESIGN AUDIO
SCHEMATIC DIAGRAM DESIGNATOR 7D UNBALANCED PI
FREQUENCY RANGE 0.000 HERTZ MINIMUM AND 500.000 HERTZ MAXIMUM
IMPEDANCE RATING IN OHMS 50.0 INPUT-OUTPUT
POWER RATING 500.0 MILLIWATTS AVERAGE
OVERALL ATTENUATION RANGE IN DECIBELS 0.0 TO 41.0
OVERALL ATTENUATION ACCURACY IN DECIBELS -0.21 TO 0.21
OVERALL LENGTH 6.000 INCHES NOMINAL
OVERALL WIDTH 2.060 INCHES NOMINAL
TERMINAL TYPE AND QUANTITY 2 CONNECTOR, COAXIAL, MALE
MOUNTING FACILITY TYPE AND QUANTITY 2 FLANGE W/MOUNTING HOLE

Restrictions/Controls & Freight Information | NSN 5985-00-815-7434

Category Code Description
Shelf-Life Code:0Nondeteriorative
Hazardous Material Indicator CodePThere is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product
Demilitarization Code:ANon-Munitions List Item/ Non-Strategic List Item - Demilitarization not required.
Controlled Inventory Item Code:UUNCLASSIFIED
Precious Metals Indicator Code:AItem does not contain precious metal
Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Automatic Data Processing Equipment:0Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9)
Category Code Description
NMF Description 061700 ELEC APPLIANCES/INSTRUMENTS NOI
Less than car load rating
Less than truck load rating J 100.2
Water commodity Code 658 unknown
Originating Activity Code XX
Air Dimension Code A Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Air Commodity H Signal Corps supplies and equipment, including radio equipment and supplies, communications equipment and supplies, electrical equipment and supplies, etc.
Air Special Handling Z No special handling required.
Special Handling Code 9 unknonwn
HAZMAT
Type of Cargo Z No special type of cargo code applicable