NSN 5985-00-124-5246 SMA753233, SM-A-753233, 1130000051
Product Details | VARIABLE ATTENUATOR
5985-00-124-5246 A device for reducing the strength of an alternating current signal either continuously or in steps, without causing appreciable signal distortion, by maintaining substantially constant output and/or input impedance match. Continuously variable resistive devices must consist of at least two sections or one section with at least two rotating contacts. The item must have an overall attenuation rating. Includes tandem mounted variable resistors designed to function as an attenuator but whose terminals are not connected. See also RESISTOR, VAIABLE (as modified).
Part Alternates: SMA753233, SM-A-753233, 1130000051, 155A44, 155-A44, 50795, 5985-00-124-5246, 00-124-5246, 5985001245246, 001245246
Electrical and Electronic Equipment Components | Antennas, Waveguides, and Related Equipment
Supply Group (FSG) | NSN Assign. | NIIN | Item Name Code (INC) |
---|---|---|---|
59 | 28 AUG 1974 | 00-124-5246 | 00838 ( ATTENUATOR, VARIABLE ) |
Request a Quote
What Our Customers Say
Compare
Related Products | NSN 5985-00-124-5246
Technical Data | NSN 5985-00-124-5246
Characteristic | Specifications |
---|---|
APPLICATION DESIGN | WAVEGUIDE |
FREQUENCY RANGE | 7.900 GIGAHERTZ MINIMUM AND 8.400 GIGAHERTZ MAXIMUM |
VOLTAGE STANDING WAVE RATIO | 1.10 |
POWER RATING | 1.0 WATTS PEAK |
INSERTION LOSS AT MINIMUM ATTENUATION IN MAXIMUM DECIBELS | 0.5 |
OVERALL ATTENUATION RANGE IN DECIBELS | 0.0 TO 35.0 |
OVERALL ATTENUATION ACCURACY IN DECIBELS | -0.10 TO 0.10 |
ATTENUATION VARIATION METHOD | CONTINUOUS |
BODY STYLE | 5A WAVEGUIDE TYPE |
OVERALL LENGTH | 5.885 INCHES MINIMUM AND 5.915 INCHES MAXIMUM |
ADJUSTMENT DEVICE TYPE AND QUANTITY | 1 SHAFT |
SHAFT TYPE | ROUND, FLATTED |
SHAFT LENGTH | 0.484 INCHES MINIMUM AND 0.516 INCHES MAXIMUM |
TERMINAL TYPE AND QUANTITY | 2 FLANGE |
WAVEGUIDE FLANGE DESIGNATION | UG-137B/U |
MOUNTING FACILITY TYPE AND QUANTITY | 4 THREADED HOLE |
MOUNTING FACILITY SCREW THREAD SERIES DESIGNATOR | UNC |
MOUNTING FACILITY NOMINAL SCREW THREAD DIAMETER | 0.138 INCHES |
MOUNTING THREAD QUANTITY | 32 PER INCH |
MOUNTING FACILITY PATTERN | FOUR POSITION RECTANGULAR |
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | 3.995 INCHES MINIMUM AND 4.005 INCHES MAXIMUM |
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | 0.495 INCHES MINIMUM AND 0.505 INCHES MAXIMUM |
III OPERATING TEMP RANGE | 45.0 TO 120.0 DEG FAHRENHEIT |
III FSC APPLICATION DATA | MICROWAVE EQUIPMENT |
Restrictions/Controls & Freight Information | NSN 5985-00-124-5246
Category | Code | Description |
---|---|---|
Shelf-Life Code: | 0 | Nondeteriorative |
Hazardous Material Indicator Code | P | There is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product |
Demilitarization Code: | A | Non-Munitions List Item/ Non-Strategic List Item - Demilitarization not required. |
Controlled Inventory Item Code: | U | UNCLASSIFIED |
Electro-static Discharge Susceptible: | A | No known Electrostatic Discharge (ESD) or Electromagnetic Interference (EMI) sensitivity |
Precious Metals Indicator Code: | A | Item does not contain precious metal |
Criticality Code: | N | The item does not have a critical feature such as tolerance, fit restrictions or application. Nuclear hardness properties have not been determined (not valid for input). |
Automatic Data Processing Equipment: | 0 | Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9) |
Category | Code | Description |
---|---|---|
NMF Description | 061700 | ELEC APPLIANCES/INSTRUMENTS NOI |
Less than car load rating | W | Rating Variable |
Less than truck load rating | W | Rating Variable |
Water commodity Code | 658 | unknown |
Originating Activity Code | CL | U.S. Army Communications-Electronics Fort Monmouth, NJ 07703-5006 |
Air Dimension Code | A | Shipment is not a consolidation and does not exceed 72 inches in any dimension. |
Air Commodity | H | Signal Corps supplies and equipment, including radio equipment and supplies, communications equipment and supplies, electrical equipment and supplies, etc. |
Air Special Handling | Z | No special handling required. |
Special Handling Code | 9 | unknonwn |
HAZMAT | ||
Type of Cargo | Z | No special type of cargo code applicable |
Management | NSN 5985-00-124-5246
Category | Code | Description |
---|---|---|
Materiel Category and Inventory Manager | G | Communications and Electronics Equipment, Electronics Materiel |
Appropriation and Budget Activity | 2 | Stock Fund Secondary Items |
Management Inventory Segment | 1 | REPARABLE ITEMS (Exclusive of Insurance and Provisioning Items.) This code will be used to identify serviceable or unserviceable items of a durable nature which when unserviceable normally can be repaired economically by depots or lower echelons of maintenance. |
Specific Group/Generic Code | 4 | Communications Systems Agency and Satellite Communications |
Weapons Systems/End Item or Homogeneous Group | 4V | SATCOM |
Accounting Requirements Code | X | Expendable item. An item of Army property coded with an ARC of ?X? in the AMDF. Expendable items require no formal accountability after issue from a stock record account. Commercial and fabricated items similar to items coded ?X? in the AMDF are considered expendable items. |
Source of Supply | B16 | US Army Communications-Electronics Command and Fort Monmouth Fort Monmouth, NJ 07703-5016 |
Agency | DA | Department of the Army |
Service Organization | L | Lead Service - 22 (Repairable) |
Reparability | L | Disposal is not authorized below wholesale/specialized repair activity level. |
Acquisition Advice Codes | X | SEMIACTIVE ITEM-NO REPLACEMENT (NON-STOCKED ITEMS) A potentially inactive NSN which must be retained in the supply system as an item of supply because (1) stocks of the item are on hand or in use below the wholesale level and (2) the NSN is cited in equipment authorization documents TO & E, TA, TM, etc., or in-use assets are being reported. 1. Items are authorized for central procurement but not authorized for stockage at wholesale level. 2. Requisitions for in-use replacement will be authorized in accordance with individual Military Service directives. 3. Requisitions may be submitted as requirements generate. Repetitive demands may dictate an AAC change to permit wholesale stockage. |
Controlled Item Code | U | UNCLASSIFIED |
Shelf Life Code | 0 | Nondeteriorative |
Purchasing | QTY UOM |
1 EA : Each |
Category | Code | Description |
---|---|---|
Cognizance Codes | 7G | Depot level reparable electronic material to support Naval Inventory Control Point, Space and Naval Warfare Systems Command, Mechanicsburg |
Source of Supply | N35 | Naval Inventory Control Point Mechanicsburg, PA 17055-0788 |
Agency | DN | Department of the Navy |
Service Organization | N | U.S. Navy |
Reparability | H | Depot Level Reparable |
Acquisition Advice Codes | Y | TERMINAL ITEM #(NON-STOCKED ITEMS) Future procurement is not authorized. No wholesale stock is available for issue. 1. Requisitions will not be processed to the wholesale manager. 2. Internal Service/agency requisitioning may be continued in accordance with the Service/agency requisitioning policies. |
Controlled Item Code | U | UNCLASSIFIED |
Shelf Life Code | 0 | Nondeteriorative |
Purchasing | QTY UOM |
1 EA : Each |