Product Details | WASHER INSULATOR

5970-01-126-8355 An insulator that is essentially thin and flat, with one through hole centrally located. The general shape may vary by the addition of features such as beveled edges, indented surfaces, through hole keys, and/or peripheral flats. The thickness measured between the two parallel bearing surfaces must not exceed 25 percent of the outside diameter or the shortest distance between peripheral flats. The thickness measured between the two parallel bearing surfaces must not exceed 25 percent of the outside diameter or the shortest distance between peripheral flats. Excludes items with more than one hole. See also INSULATOR, DISK; INSULATOR, BEAD; INSULATOR, BUSHING; and INSULATOR, PLATE

Part Alternates: M38527/08-062P, M38527/8-62P, M3852708062P, M38527862P, M49466/01-060P, M4946601060P, MIL-I-49466/1, MILI494661, MIL-M-38527/8, MILM385278, 5970-01-126-8355, 01-126-8355, 5970011268355, 011268355

Electrical and Electronic Equipment Components | Electrical Insulators and Insulating Materials

Supply Group (FSG) NSN Assign. NIIN
59 17 FEB 1982 01-126-8355

Drawings & Photos | NSN 5970-01-126-8355


Cross Reference | NSN 5970-01-126-8355

Part Number Cage Code Manufacturer
M38527/08-062P 81349 MILITARY SPECIFICATIONS PROMULGATED BY MILITARY
M38527/8-62P 81349 MILITARY SPECIFICATIONS PROMULGATED BY MILITARY
M49466/01-060P 81349 MILITARY SPECIFICATIONS PROMULGATED BY MILITARY
MIL-I-49466/1 81349 MILITARY SPECIFICATIONS PROMULGATED BY MILITARY
MIL-M-38527/8 81349 MILITARY SPECIFICATIONS PROMULGATED BY MILITARY

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 5970-01-126-8355

Technical Data | NSN 5970-01-126-8355

Characteristic Specifications
STYLE DESIGNATOR Q1 ROUND, FLAT
INSIDE DIAMETER 0.094 INCHES NOMINAL
OUTSIDE DIAMETER 0.250 INCHES NOMINAL
OVERALL HEIGHT 0.002 INCHES NOMINAL
MATERIAL AND LOCATION OVERALL PLASTIC, POLYIMIDE, MIL-P-46112, TYPE 1
MANUFACTURERS CODE 81349
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE MIL-I-49466/1
MANUFACTURERS CODE 81349
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE M49466/01-060P

Restrictions/Controls & Freight Information | NSN 5970-01-126-8355

Category Code Description
Shelf-Life Code:0Nondeteriorative
Hazardous Material Indicator CodePThere is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product
Demilitarization Code:ANon-Munitions List Item/ Non-Strategic List Item - Demilitarization not required.
Controlled Inventory Item Code:UUNCLASSIFIED
Precious Metals Indicator Code:AItem does not contain precious metal
Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Automatic Data Processing Equipment:0Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9)
Category Code Description
NMF Description 103300 INSULATING MATERIAL NOI
Less than car load rating
Less than truck load rating W Rating Variable
Water commodity Code 72D unknown
Originating Activity Code TX Defense Supply Center Columbus
Columbus, OH 43218
Air Dimension Code A Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Air Commodity H Signal Corps supplies and equipment, including radio equipment and supplies, communications equipment and supplies, electrical equipment and supplies, etc.
Air Special Handling Z No special handling required.
Special Handling Code 9 unknonwn
HAZMAT
Type of Cargo Z No special type of cargo code applicable