NSN 5970-01-076-1405 642AS3369, 01-076-1405, 010761405
Product Details | WASHER INSULATOR
5970-01-076-1405 An insulator that is essentially thin and flat, with one through hole centrally located. The general shape may vary by the addition of features such as beveled edges, indented surfaces, through hole keys, and/or peripheral flats. The thickness measured between the two parallel bearing surfaces must not exceed 25 percent of the outside diameter or the shortest distance between peripheral flats. The thickness measured between the two parallel bearing surfaces must not exceed 25 percent of the outside diameter or the shortest distance between peripheral flats. Excludes items with more than one hole. See also INSULATOR, DISK; INSULATOR, BEAD; INSULATOR, BUSHING; and INSULATOR, PLATE
Part Alternates: 642AS3369, 5970-01-076-1405, 01-076-1405, 5970010761405, 010761405
Electrical and Electronic Equipment Components | Electrical Insulators and Insulating Materials
Supply Group (FSG) | NSN Assign. | NIIN | Item Name Code (INC) |
---|---|---|---|
59 | 02 MAY 1979 | 01-076-1405 | 18294 ( INSULATOR, WASHER ) |
Cross Reference | NSN 5970-01-076-1405
Part Number | Cage Code | Manufacturer |
---|---|---|
642AS3369 | 30003 | NAVAL AIR SYSTEMS COMMAND |
Request a Quote
What Our Customers Say
Compare
Related Products | NSN 5970-01-076-1405
Technical Data | NSN 5970-01-076-1405
Characteristic | Specifications |
---|---|
STYLE DESIGNATOR | Q1 ROUND, FLAT |
INSIDE DIAMETER | 0.052 INCHES NOMINAL |
OUTSIDE DIAMETER | 0.193 INCHES MINIMUM AND 0.213 INCHES MAXIMUM |
OVERALL HEIGHT | 0.005 INCHES NOMINAL |
MATERIAL AND LOCATION | OVERALL PLASTIC, POLYIMIDE, MIL-P-46112 |
MANUFACTURERS CODE | 30003 |
DESIGN CONTROL REFERENCE | 642AS3369 |
Restrictions/Controls & Freight Information | NSN 5970-01-076-1405
Category | Code | Description |
---|---|---|
Shelf-Life Code: | 0 | Nondeteriorative |
Hazardous Material Indicator Code | P | There is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product |
Demilitarization Code: | A | Non-Munitions List Item/ Non-Strategic List Item - Demilitarization not required. |
Controlled Inventory Item Code: | U | UNCLASSIFIED |
Precious Metals Indicator Code: | U | Precious metal type is unknown |
Criticality Code: | X | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
Category | Code | Description |
---|---|---|
No Freight Information |
Management | NSN 5970-01-076-1405
Category | Code | Description |
---|---|---|
Cognizance Codes | 9G | Navy-owned stocks of defense general material Naval Inventory Control Point, Mechanicsburg |
Source of Supply | S9G | Defense Supply Center Richmond Richmond, VA 23297 |
Agency | DN | Department of the Navy |
Service Organization | N | U.S. Navy |
Acquisition Advice Codes | V | TERMINAL ITEM # Identifies items in stock, but future procurement is not authorized. Requisitions may continue to be submitted until stocks are exhausted. Preferred item National Stock Number is normally provided by application of the phrase: When Exhausted Use (NSN). Requisitions will be submitted in accordance with IMM/Service requisitioning procedures as applicable. |
Controlled Item Code | U | UNCLASSIFIED |
Shelf Life Code | 0 | Nondeteriorative |
Purchasing | QTY UOM |
1 EA : Each |