Product Details | DIGITAL MICROCIRCUIT

5962-01-603-6876 A microcircuit specifically designed to generate, modify, or process electrical signals which operate with two distinct or binary states. These states are commonly referred to as on and off, true and false, high and low, or "1" and "0".

Part Alternates: AM26LV32CD, 5962-01-603-6876, 01-603-6876, 5962016036876, 016036876

Electrical and Electronic Equipment Components | Microcircuits, Electronic

Supply Group (FSG) NSN Assign. NIIN
59 12 MAR 2012 01-603-6876

Cross Reference | NSN 5962-01-603-6876

Part Number Cage Code Manufacturer
AM26LV32CD 01295 TEXAS INSTRUMENTS INCORPORATED DBA TEXAS INSTRUMENTS
AM26LV32CD 1CB74 TEXAS INSTRUMENTS INCORPORATED DBA TEXAS INSTRUMENTS

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 5962-01-603-6876

Technical Data | NSN 5962-01-603-6876

Characteristic Specifications
BODY LENGTH 9.9 MILLIMETERS MINIMUM AND 10.5 MILLIMETERS MAXIMUM
BODY HEIGHT 2.0 MILLIMETERS MAXIMUM
OPERATING TEMP RANGE -45.0 TO 85.0 DEG CELSIUS
TERMINAL TYPE AND QUANTITY 16 PRINTED CIRCUIT
BODY WIDTH 5.0 MILLIMETERS MINIMUM AND 5.6 MILLIMETERS MAXIMUM
PART NAME ASSIGNED BY CONTROLLING AGENCY LOW-VOLTAGE,HIGH SPEED QUADRUPLE DIFFERENTIAL LINE DRIVER
SPECIAL FEATURES SWITCHING RATE UP TO 32MHZ;OPERATE FROM A SINGLE 3.3-V SUPPLY;OPEN-CIRCUIT,SHORT CIRCUIT AND TERMINATED FAIL-SAFE;235 MW WITH 4 RECEIVERS AT 32 MHZ;ULTRA LOW POWER DISSIPATION...27 MW TYP;-0.3-V TO 5.5-V COMMON-MODE RANGE W TO /-200 MV SENSITIVITY; ACCEPTS 5-V LOGIC INPUT W/3.3-VVCC;PIN TO PIN COMPATIBLE WITH AM26C32, AM26LS32, MB570;INPUT HYSTERESIS...50 MV TYP;235 MW WITH FOUR RECEIVERS AT 32 MHZ
STORAGE TEMP RANGE -65.0 TO 150.0 DEG CELSIUS

Restrictions/Controls & Freight Information | NSN 5962-01-603-6876

Category Code Description
Hazardous Material Indicator CodeNThere is no data in the HMIS and the NSN is in an FSC not generally suspected of containing hazardous materials
Demilitarization Code:QStrategic List Item (SLI). Demilitarization not required. SLI are non-MLI(Munitions List Items) controlled by the U.S. Dept. of Commerce through the Export Administration Regulations (EAR) and indicated on the Commerce Control List (CCL). Each CCL entry is preceded by a four-digit Export Control Commerce Control List Item (CCLI) – MUT to the point of scrap required outside the United States. Inside the United States, MUT is required when the DEMIL integrity code (IC) is “3” and MUT is not required when the DEMIL IC is “6.”
Electro-static Discharge Susceptible:BESD sensitivity
Precious Metals Indicator Code:AItem does not contain precious metal
Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Automatic Data Processing Equipment:0Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9)
Category Code Description
NMF Description 061700 ELEC APPLIANCES/INSTRUMENTS NOI
Less than car load rating P 77.5
Less than truck load rating W Rating Variable
Water commodity Code 72D unknown
Originating Activity Code ZH Republic of Korea
ZJ
ZK
Air Dimension Code A Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Air Commodity H Signal Corps supplies and equipment, including radio equipment and supplies, communications equipment and supplies, electrical equipment and supplies, etc.
Air Special Handling Z No special handling required.
Special Handling Code 9 unknonwn
HAZMAT
Type of Cargo 3 Electrostatic Sensitive Device (ESD), subject to damage caused by electrostatic discharge. (See DoD 4500.32-R, Volume 1, Appendix A, Section I for additional information on ESD devices).

Management | NSN 5962-01-603-6876

Category Code Description
Budget Code9 General Support DIV57X4921.070:Air Force decentrally managed expense items (ERRC XB3, XF-3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors.
Price ValidationN The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
  • The price has not been analyzed or reviewed for accuracy.
  • ZOP or Standard price challenges are permissible, but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of ?L? or?F?,the case must be evaluated locally where purchased or fabricated.
Fund CodeSFStock fund applicable to items managed for the Air Force by the respective Inventory Control Point.
Source of SupplySMSDefense Logistics Agency
Enterprise Business Systems
AgencyDFDepartment of the Air Force
Service OrganizationFU.S. Air Force
ReparabilityNStock Fund (except Munitions)
Acquisition Advice CodesZINSURANCE/NUMERIC STOCKAGE OBJECTIVE ITEM # Items which may be required occasionally or intermittently, and prudence requires that a nominal quantity of materiel be stocked due to the essentiality or the lead time of the item. 1. The item is centrally managed, stocked, and issued. 2. Requisitions will be submitted in accordance with IMM/Service requisitioning procedures.
Controlled Item CodeUUNCLASSIFIED
Shelf Life Code0Nondeteriorative