Product Details | ELECTRICAL CONNECTOR COVER

5935-01-128-4591 A device specifically designed to fully or partially inclose an electrical connector to protect its mating end from mechanical damage. Excludes CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and GUARD, ELECTRICAL CONNECTOR. See also COVER AND GUARD, ELECTRICAL CONNECTOR; SHELL, ELECTRICAL CONNECTOR; and SHIELD, ELECTRICAL CONNECTOR.

Part Alternates: S140023W4RE34, S1400-23W4-RE-34, S140023W4RE59, S1400-23W4-RE-59, ST5M1631234, ST5M1631-234, G8931234, G8931-234, 10135653 , 900-616-234, 5935-01-128-4591, 01-128-4591, 5935011284591, 011284591, 900616234

Electrical and Electronic Equipment Components | Connectors, Electrical

Supply Group (FSG) NSN Assign. NIIN
59 21 MAR 1982 01-128-4591

Drawings & Photos | NSN 5935-01-128-4591


Demand History | NSN 5935-01-128-4591

Part Number Request Date QTY Origin
900-616-234 2024-05-16 376 DIBBS
G8931-234 2024-05-16 376 DIBBS
S1400-23W4-RE-34 2024-05-16 376 DIBBS
S1400-23W4-RE-59 2024-05-16 376 DIBBS
ST5M1631-234 2024-05-16 376 DIBBS
900-616-234 2024-01-21 376 DIBBS
G8931-234 2024-01-21 376 DIBBS
S1400-23W4-RE-34 2024-01-21 376 DIBBS
S1400-23W4-RE-59 2024-01-21 376 DIBBS
ST5M1631-234 2024-01-21 376 DIBBS
900-616-234 2023-11-06 353 DIBBS
G8931-234 2023-11-06 353 DIBBS
S1400-23W4-RE-34 2023-11-06 353 DIBBS
S1400-23W4-RE-59 2023-11-06 353 DIBBS
ST5M1631-234 2023-11-06 353 DIBBS
900-616-234 2023-10-26 353 DIBBS
G8931-234 2023-10-26 353 DIBBS
S1400-23W4-RE-34 2023-10-26 353 DIBBS
S1400-23W4-RE-59 2023-10-26 353 DIBBS
ST5M1631-234 2023-10-26 353 DIBBS
900-616-234 2023-09-25 23 DIBBS
G8931-234 2023-09-25 23 DIBBS
S1400-23W4-RE-34 2023-09-25 23 DIBBS
S1400-23W4-RE-59 2023-09-25 23 DIBBS
ST5M1631-234 2023-09-25 23 DIBBS
900-616-234 2023-09-14 23 DIBBS
G8931-234 2023-09-14 23 DIBBS
S1400-23W4-RE-34 2023-09-14 23 DIBBS
S1400-23W4-RE-59 2023-09-14 23 DIBBS
ST5M1631-234 2023-09-14 23 DIBBS
900-616-234 2023-03-17 405 DIBBS
G8931-234 2023-03-17 405 DIBBS
S1400-23W4-RE-34 2023-03-17 405 DIBBS
S1400-23W4-RE-59 2023-03-17 405 DIBBS
ST5M1631-234 2023-03-17 405 DIBBS
900-616-234 2022-07-11 473 DIBBS
G8931-234 2022-07-11 473 DIBBS
S1400-23W4-RE-34 2022-07-11 473 DIBBS
S1400-23W4-RE-59 2022-07-11 473 DIBBS
ST5M1631-234 2022-07-11 473 DIBBS
900-616-234 2022-06-30 473 DIBBS
G8931-234 2022-06-30 473 DIBBS
S1400-23W4-RE-34 2022-06-30 473 DIBBS
S1400-23W4-RE-59 2022-06-30 473 DIBBS
ST5M1631-234 2022-06-30 473 DIBBS
900-616-234 2019-12-01 251 DIBBS
G8931-234 2019-12-01 251 DIBBS
S1400-23W4-RE-34 2019-12-01 251 DIBBS
S1400-23W4-RE-59 2019-12-01 251 DIBBS
ST5M1631-234 2019-12-01 251 DIBBS
5935-01-128-4591 2018-06-28 263 DIBBS
5935-01-128-4591 2017-03-02 346 DIBBS
5935-01-128-4591 2016-07-28 330 DIBBS
5935-01-128-4591 2016-07-17 330 DIBBS
5935-01-128-4591 2016-02-04 232 DIBBS
5935-01-128-4591 2015-07-12 201 DIBBS
5935-01-128-4591 2014-07-24 206 DIBBS
5935-01-128-4591 2014-07-13 206 DIBBS
5935-01-128-4591 2013-06-20 158 DIBBS
5935-01-128-4591 2013-06-05 158 DIBBS
5935-01-128-4591 2012-09-25 145 DIBBS
5935-01-128-4591 2012-04-20 155 DIBBS
5935-01-128-4591 2011-08-06 0 DIBBS
5935-01-128-4591 2011-07-09 104 DIBBS
5935-01-128-4591 2010-09-13 132 DIBBS
5935-01-128-4591 2009-10-30 126 DIBBS
5935-01-128-4591 2009-09-08 138 DIBBS
5935-01-128-4591 2008-01-11 274 DIBBS
5935-01-128-4591 2007-06-07 126 DIBBS

Cross Reference | NSN 5935-01-128-4591

Part Number Cage Code Manufacturer
900-616-234 31461 ELECTRO ADAPTER, INC. DBA PLATING
G8931-234 06324 GLENAIR, INC.
S1400-23W4-RE-34 07418 JOSLYN SUNBANK COMPANY, LLC
S1400-23W4-RE-59 07418 JOSLYN SUNBANK COMPANY, LLC
ST5M1631-234 76301 BOEING COMPANY, THE DBA BOEING

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 5935-01-128-4591

Technical Data | NSN 5935-01-128-4591

Characteristic Specifications
STYLE DESIGNATOR 2A EXTERNAL BAYONET W/CHAIN OR ROPE
BODY HEIGHT 1.120 INCHES MAXIMUM
OVERALL DIAMETER 1.750 INCHES MAXIMUM
MATERIAL ALUMINUM ALLOY
SURFACE TREATMENT CADMIUM
MOUNTING FACILITY TYPE AND QUANTITY 1 BAYONET LOCK
FURNISHED ITEMS WIRE ROPE
ATTACHMENT FEATURE LENGTH 4.000 INCHES NOMINAL
EYE INSIDE DIAMETER ANY ACCEPTABLE
SIZE DESIGNATION 23

Restrictions/Controls & Freight Information | NSN 5935-01-128-4591

Category Code Description
Shelf-Life Code:0Nondeteriorative
Hazardous Material Indicator CodePThere is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product
Demilitarization Code:ANon-Munitions List Item/ Non-Strategic List Item - Demilitarization not required.
Controlled Inventory Item Code:UUNCLASSIFIED
Electro-static Discharge Susceptible:ANo known Electrostatic Discharge (ESD) or Electromagnetic Interference (EMI) sensitivity
Precious Metals Indicator Code:AItem does not contain precious metal
Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Category Code Description
NMF Description 061680 ELEC WIRING PLUGS ETC
Less than car load rating
Less than truck load rating W Rating Variable
Water commodity Code 72D unknown
Originating Activity Code TX Defense Supply Center Columbus
Columbus, OH 43218
Air Dimension Code A Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Air Commodity H Signal Corps supplies and equipment, including radio equipment and supplies, communications equipment and supplies, electrical equipment and supplies, etc.
Air Special Handling Z No special handling required.
Special Handling Code 9 unknonwn
HAZMAT
Type of Cargo Z No special type of cargo code applicable

Management | NSN 5935-01-128-4591

Category Code Description
Budget Code9 General Support DIV57X4921.070:Air Force decentrally managed expense items (ERRC XB3, XF-3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors.
Materiel Management Aggregation CodeEHSX:ELECTRONIC COMPONENTS
Price ValidationN The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
  • The price has not been analyzed or reviewed for accuracy.
  • ZOP or Standard price challenges are permissible, but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of ?L? or?F?,the case must be evaluated locally where purchased or fabricated.
Fund CodeSFStock fund applicable to items managed for the Air Force by the respective Inventory Control Point.
Source of SupplySMSDefense Logistics Agency
Enterprise Business Systems
AgencyDFDepartment of the Air Force
Service OrganizationFU.S. Air Force
ReparabilityNStock Fund (except Munitions)
Acquisition Advice CodesDDoD INTEGRATED MATERIEL-MANAGED, STOCKED, AND ISSUED # Issue, transfer, or shipment is not subject to specialized controls other than those imposed by the Integrated Materiel Manager/Service supply policy. 1. The item is centrally managed, stocked, and issued. 2. Requisitions must contain the fund citation required to acquire the item. Requisitions will be submitted in accordance with Integrated Materiel Manager(IMM)/Service requisitioning procedures.
Controlled Item CodeUUNCLASSIFIED
Shelf Life Code0Nondeteriorative
Purchasing QTY
UOM
1
EA : Each
Category Code Description
Cognizance Codes9BNavy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Source of SupplySMSDefense Logistics Agency
Enterprise Business Systems
AgencyDNDepartment of the Navy
Service OrganizationNU.S. Navy
Acquisition Advice CodesDDoD INTEGRATED MATERIEL-MANAGED, STOCKED, AND ISSUED # Issue, transfer, or shipment is not subject to specialized controls other than those imposed by the Integrated Materiel Manager/Service supply policy. 1. The item is centrally managed, stocked, and issued. 2. Requisitions must contain the fund citation required to acquire the item. Requisitions will be submitted in accordance with Integrated Materiel Manager(IMM)/Service requisitioning procedures.
Controlled Item CodeUUNCLASSIFIED
Shelf Life Code0Nondeteriorative
Purchasing QTY
UOM
1
EA : Each