Product Details | DUST AND MOISTURE SEAL BOOT

5930-01-141-5368 A flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.20253400020Hardware, Commercial59300008Switches

Part Alternates: MS25196/32-341, MS2519632341, M5423/16, M5423/16-001, M5423/16-01, M5423/16-1, M5423/16A, M542316, M542316001, M54231601, M5423161, M542316A, H655-1310- PN 009, H6551310PN009, TS10368, MIL-B-5423/16, MILB542316, 70370692364, 703-7069236-4, 0561C0029, 1426A-1-1-11.2, 1426A11112, 32341, 32-341, 3234120PSI, 32-341-20PSI, 43767269037, 437-6726903-7, 4575864, 457-5864 , 5180-9615 ITEM 33, 51809615ITEM33, 5180-9715 ITEM 33, 51809715ITEM33, 5180-9815 ITEM 33, 51809815ITEM33, 531-6985692 PN 009, 5316985692PN009, 5930-01-141-5368, 01-141-5368, 5330005746704, 5930011415368, 011415368

Electrical and Electronic Equipment Components | Switches

Supply Group (FSG) NSN Assign. NIIN
59 01 NOV 1982 01-141-5368

Drawings & Photos | NSN 5930-01-141-5368


Demand History | NSN 5930-01-141-5368

Part Number Request Date QTY Origin
5930-01-141-5368 2024-10-305 17390 DIBBS
5930-01-141-5368 2023-11-316 1109 DIBBS
5930-01-141-5368 2023-08-232 973 DIBBS
5930-01-141-5368 2023-03-88 4 United States
5930-01-141-5368 2022-12-340 1863 DIBBS
5930-01-141-5368 2022-08-237 1321 DIBBS
5930-01-141-5368 2022-08-214 1281 DIBBS
5930-01-141-5368 2021-09-264 1898 DIBBS
5930-01-141-5368 2021-07-200 1 US
5930-01-141-5368 2021-06-153 2496 DIBBS
M54231601 2021-04-111 23 US
5930-01-141-5368 2021-03-89 285 United States
M54231601 2021-03-62 23 US
5930-01-141-5368 2020-08-226 2496 DIBBS
5930-01-141-5368 2020-07-203 2117 DIBBS
5930-01-141-5368 2020-03-70 24 United States
5930-01-141-5368 2019-08-214 173 MANUAL
TS10368 2018-06-164 3 United Arab Emirates
M5423161 2018-04-114 31 United States
M54231601 2018-03-71 12 United States
32341 2016-06-159 2 United States
M542316001 2012-03-68 20 United States
M5423161 2011-07-194 2 United States
32341 2011-05-124 10 US
5930-01-141-5368 2011-03-68 12 US
5930-01-141-5368 2010-12-349 50 US
5930-01-141-5368 2010-10-299 5 US
M54231601 2010-03-61 15 us
M54231601 2009-05-140 400 us
5930-01-141-5368 2009-02-49 1400 DIBBS
5930-01-141-5368 2008-06-182 11912 DIBBS
5930-01-141-5368 2008-05-123 9253 DIBBS
5930-01-141-5368 2007-10-303 4000 DIBBS
32341 2007-07-201 246 Australia
5930-01-141-5368 2007-06-158 3333 DIBBS

Cross Reference | NSN 5930-01-141-5368

Part Number Cage Code Manufacturer
0561C0029 03538 LOCKHEED MARTIN CORPORATION DIV MST
1426A-1-1-11.2 81312 WINCHESTER ELECTRONICS CORPORATION
32-341 81640 EATON CORPORATION DBA FLUID POWER DIV
32-341-20PSI 81640 EATON CORPORATION DBA FLUID POWER DIV
437-6726903-7 53711 NAVAL SEA SYSTEMS COMMAND
5180-9615 ITEM 33 88898 JOHNS HOPKINS UNIVERSITY APPLIED PHYSICS LABORATORY LLC, THE
5180-9715 ITEM 33 88898 JOHNS HOPKINS UNIVERSITY APPLIED PHYSICS LABORATORY LLC, THE
5180-9815 ITEM 33 88898 JOHNS HOPKINS UNIVERSITY APPLIED PHYSICS LABORATORY LLC, THE
531-6985692 PN 009 53711 NAVAL SEA SYSTEMS COMMAND
5330005746704 SCY13 E.C.A ETABLISSEMENT CENTRALD'APPROVISIONNEMENT DES
703-7069236-4 53711 NAVAL SEA SYSTEMS COMMAND
H655-1310- PN 009 96169 ELECTRIC BOAT CORPORATION
M5423/16 81349 MILITARY SPECIFICATIONS PROMULGATED BY MILITARY
M5423/16-001 81349 MILITARY SPECIFICATIONS PROMULGATED BY MILITARY
M5423/16-01 53711 NAVAL SEA SYSTEMS COMMAND
M5423/16-01 81349 MILITARY SPECIFICATIONS PROMULGATED BY MILITARY
M5423/16-01 96906 MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS
M5423/16-1 81349 MILITARY SPECIFICATIONS PROMULGATED BY MILITARY
M5423/16-1 96906 MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS
M5423/16A 81349 MILITARY SPECIFICATIONS PROMULGATED BY MILITARY
MIL-B-5423/16 81349 MILITARY SPECIFICATIONS PROMULGATED BY MILITARY
MS25196/32-341 96906 MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS
TS10368 91929 HONEYWELL INTERNATIONAL INC. DBA HONEYWELL

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 5930-01-141-5368

Technical Data | NSN 5930-01-141-5368

Characteristic Specifications
STYLE DESIGNATOR A4 THRU-HOLE
OVERALL HEIGHT 0.105 INCHES MINIMUM AND 0.120 INCHES MAXIMUM
BODY OUTSIDE DIAMETER 0.650 INCHES MINIMUM AND 0.677 INCHES MAXIMUM
OPENING INSIDE DIAMETER 0.461 INCHES MINIMUM AND 0.472 INCHES MAXIMUM
MATERIAL RUBBER SILICONE BODY
MOUNTING METHOD THREADED HOLE
MOUNTING DEVICE QUANTITY 1
TEST DATA DOCUMENT 81349-MIL-B-5423 SPECIFICATION
SPECIFICATION/STANDARD DATA 81349-MIL-B-5423/16 GOVERNMENT SPECIFICATION
MANUFACTURERS CODE 81349
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE MIL-B-5423/16
MANUFACTURERS CODE 81349
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE M5423/16-01

Restrictions/Controls & Freight Information | NSN 5930-01-141-5368

Category Code Description
Shelf-Life Code:0Nondeteriorative
Hazardous Material Indicator CodePThere is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product
Demilitarization Code:ANon-Munitions List Item/ Non-Strategic List Item - Demilitarization not required.
Controlled Inventory Item Code:UUNCLASSIFIED
Precious Metals Indicator Code:AItem does not contain precious metal
Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Automatic Data Processing Equipment:0Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9)
Category Code Description
NMF Description 194090 WASHERS/SEALS
Less than car load rating
Less than truck load rating S 60.0
Water commodity Code 846 unknown
Originating Activity Code TX Defense Supply Center Columbus
Columbus, OH 43218
Air Dimension Code A Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Air Commodity H Signal Corps supplies and equipment, including radio equipment and supplies, communications equipment and supplies, electrical equipment and supplies, etc.
Air Special Handling Z No special handling required.
Special Handling Code 9 unknonwn
HAZMAT
Type of Cargo Z No special type of cargo code applicable

Management | NSN 5930-01-141-5368

Category Code Description
Materiel Category and Inventory ManagerQ Electronics Materiel (DLA/GSA Items)
Appropriation and Budget Activity2 Stock Fund Secondary Items
Management Inventory Segment2 NONREPARABLE ITEMS (Exclusive of Insurance and Provisioning Items). This code will be used to identify items which are not reparable.
Specific Group/Generic Code0 Medical Materiel
Weapons Systems/End Item or Homogeneous Group00DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
Accounting Requirements CodeX Expendable item. An item of Army property coded with an ARC of ?X? in the AMDF. Expendable items require no formal accountability after issue from a stock record account. Commercial and fabricated items similar to items coded ?X? in the AMDF are considered expendable items.
Source of SupplySMSDefense Logistics Agency
Enterprise Business Systems
AgencyDADepartment of the Army
Service OrganizationAU.S. Army
ReparabilityZThis is a nonreparable item. If condemned or economically unserviceable, then dispose at the level authorized replace the item.
Acquisition Advice CodesDDoD INTEGRATED MATERIEL-MANAGED, STOCKED, AND ISSUED # Issue, transfer, or shipment is not subject to specialized controls other than those imposed by the Integrated Materiel Manager/Service supply policy. 1. The item is centrally managed, stocked, and issued. 2. Requisitions must contain the fund citation required to acquire the item. Requisitions will be submitted in accordance with Integrated Materiel Manager(IMM)/Service requisitioning procedures.
Controlled Item CodeUUNCLASSIFIED
Shelf Life Code0Nondeteriorative
Purchasing QTY
UOM
5
EA : Each
Category Code Description
Budget Code9 General Support DIV57X4921.070:Air Force decentrally managed expense items (ERRC XB3, XF-3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors.
Materiel Management Aggregation CodeAHSU:LGM-30 MINUTEMAN
Price ValidationN The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
  • The price has not been analyzed or reviewed for accuracy.
  • ZOP or Standard price challenges are permissible, but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of ?L? or?F?,the case must be evaluated locally where purchased or fabricated.
Fund CodeSFStock fund applicable to items managed for the Air Force by the respective Inventory Control Point.
Source of SupplySMSDefense Logistics Agency
Enterprise Business Systems
AgencyDFDepartment of the Air Force
Service OrganizationFU.S. Air Force
ReparabilityNStock Fund (except Munitions)
Acquisition Advice CodesDDoD INTEGRATED MATERIEL-MANAGED, STOCKED, AND ISSUED # Issue, transfer, or shipment is not subject to specialized controls other than those imposed by the Integrated Materiel Manager/Service supply policy. 1. The item is centrally managed, stocked, and issued. 2. Requisitions must contain the fund citation required to acquire the item. Requisitions will be submitted in accordance with Integrated Materiel Manager(IMM)/Service requisitioning procedures.
Controlled Item CodeUUNCLASSIFIED
Shelf Life Code0Nondeteriorative
Purchasing QTY
UOM
5
EA : Each
Category Code Description
Stores Account Code1Marine Corps Stock Fund Account Item.
Combat Essentiality Code6Critical Repair Part to a Non-Combat Essential End Item. Those parts or components whose failure in a noncombat essential end item will render the end item inoperative or reduce its effectiveness below the minimum acceptable level of efficiency.
Materiel Management CodeBAll CommoditiesDefense Logistics Agency, (DLA,)
Echelon Management Code2ICP/DSSC Marine Corps-managed Recoverability Code D items and Defense Logistics Agency (DLA)/TACOM/GSA) items which the integrated manager has not decontrolled.
Physical Category Code1Bin
Source of SupplySMSDefense Logistics Agency
Enterprise Business Systems
AgencyDMU.S. Marine Corps
Service OrganizationMU.S. Marine Corps
ReparabilityZNonreparable item. When unserviceable, condemn and dispose at the level indicated by the first digit of the maintenance code.
Acquisition Advice CodesDDoD INTEGRATED MATERIEL-MANAGED, STOCKED, AND ISSUED # Issue, transfer, or shipment is not subject to specialized controls other than those imposed by the Integrated Materiel Manager/Service supply policy. 1. The item is centrally managed, stocked, and issued. 2. Requisitions must contain the fund citation required to acquire the item. Requisitions will be submitted in accordance with Integrated Materiel Manager(IMM)/Service requisitioning procedures.
Controlled Item CodeUUNCLASSIFIED
Shelf Life Code0Nondeteriorative
Purchasing QTY
UOM
5
EA : Each
Category Code Description
Cognizance Codes9BNavy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Source of SupplySMSDefense Logistics Agency
Enterprise Business Systems
AgencyDNDepartment of the Navy
Service OrganizationNU.S. Navy
Acquisition Advice CodesDDoD INTEGRATED MATERIEL-MANAGED, STOCKED, AND ISSUED # Issue, transfer, or shipment is not subject to specialized controls other than those imposed by the Integrated Materiel Manager/Service supply policy. 1. The item is centrally managed, stocked, and issued. 2. Requisitions must contain the fund citation required to acquire the item. Requisitions will be submitted in accordance with Integrated Materiel Manager(IMM)/Service requisitioning procedures.
Controlled Item CodeUUNCLASSIFIED
Shelf Life Code0Nondeteriorative
Purchasing QTY
UOM
5
EA : Each