NSN 5930-01-084-5583 01-084-5583, 010845583
Product Details | PRESSURE SWITCH
5930-01-084-5583 A switch which is actuated by changes in pressure of any gas or liquid or by changes in a vacuum acting upon its sensing element. Excludes BAROSWITCH; SWITCH, PRESSURE-THERMOSTATIC; and SWITCH, SENSITIVE.
Part Alternates: 5930-01-084-5583, 01-084-5583, 5930010845583, 010845583
Electrical and Electronic Equipment Components | Switches
Supply Group (FSG) | NSN Assign. | NIIN | Item Name Code (INC) |
---|---|---|---|
59 | 01-084-5583 | 00206 ( SWITCH, PRESSURE ) |
Request a Quote
What Our Customers Say
Compare
NSNs for Compare ( up to 4 ): Add 5930-01-084-5583
Related Products | NSN 5930-01-084-5583
Technical Data | NSN 5930-01-084-5583
Characteristic | Specifications |
---|---|
BODY LENGTH | 1.900 INCHES MAXIMUM |
OVERALL DIAMETER | 0.820 INCHES MAXIMUM |
PRESSURE SWITCH TYPE | GAGE |
NONPILE-UP CONTACT ARRANGEMENT | 1 POLE, SINGLE THROW, NORMALLY OPEN, MOMENTARY ACTION |
CONTACT ACTION STIMULUS | DECREASE |
CONTACT ADJUSTABILITY | DEACTUATION POINT NOT ADJUSTABLE AND ACTUATION POINT NOT ADJUSTABLE |
CONTACT STIMULUS RATING | 15.00 ACTUATION POINT NOMINAL POUNDS PER SQUARE INCH GAGE AND 21.00 DEACTUATION POINT NOMINAL POUNDS PER SQUARE INCH GAGE AND 6.00 DIFFERENTIAL POINT NOMINAL POUNDS PER SQUARE INCH GAGE |
CONTACT VOLTAGE RATING IN VOLTS | 28.0 DC AT SEA LEVEL SINGLE VOLTAGE |
CONTACT LOAD CURRENT RATING | 3.0 AMPERES RESISTIVE LOAD SINGLE VOLTAGE |
PRESSURE CONNECTOR TYPE | FLARED, THREADED EXTERNAL SINGLE CONNECTION |
TERMINAL TYPE | PIN |
MOUNTING METHOD | TERMINAL |
THREAD SERIES DESIGNATOR | NPT SINGLE PRESSURE CONNECTION |
NOMINAL THREAD SIZE | 0.125 INCHES SINGLE PRESSURE CONNECTION |
THREAD QUANTITY PER INCH | 27 SINGLE PRESSURE CONNECTION |
III HAZARDOUS LOCATIONS/ENVIRONMENTAL PROTECTION | DUSTPROOF |
III END ITEM IDENTIFICATION | FRM86 77777 |
Restrictions/Controls & Freight Information | NSN 5930-01-084-5583
Category | Code | Description |
---|---|---|
Hazardous Material Indicator Code | P | There is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product |
Category | Code | Description |
---|---|---|
No Freight Information |