Product Details | LOW PASS FILTER

5915-01-578-1017 An item designed to pass all frequencies below a specified frequency. Excludes a single inductance, a single capacitance, or a single resistance. See COIL (as modified); REACTOR; CAPACITOR (as modified); and RESISTOR (as modified).

Part Alternates: LPP 200-5-N, LPP2005N, 5915-01-578-1017, 01-578-1017, 5915015781017, 015781017

Electrical and Electronic Equipment Components | Filters and Networks

Supply Group (FSG) NSN Assign. NIIN
59 28 SEP 2009 01-578-1017

Cross Reference | NSN 5915-01-578-1017

Part Number Cage Code Manufacturer
LPP 200-5-N 12598 R L C ELECTRONICS, INC.

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 5915-01-578-1017

Technical Data | NSN 5915-01-578-1017

Characteristic Specifications
PART NAME ASSIGNED BY CONTROLLING AGENCY HIGH POWER LOW PASS FILTER
SPECIAL FEATURES CUT-OFF FREQUENCY IN MHZ: 200; NUMBER OF SECTIONS: 5; HAS ONE MALE AND ONE FEMALE TYPE N CONNECTION

Restrictions/Controls & Freight Information | NSN 5915-01-578-1017

Category Code Description
Hazardous Material Indicator CodePThere is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product
Demilitarization Code:QStrategic List Item (SLI). Demilitarization not required. SLI are non-MLI(Munitions List Items) controlled by the U.S. Dept. of Commerce through the Export Administration Regulations (EAR) and indicated on the Commerce Control List (CCL). Each CCL entry is preceded by a four-digit Export Control Commerce Control List Item (CCLI) – MUT to the point of scrap required outside the United States. Inside the United States, MUT is required when the DEMIL integrity code (IC) is “3” and MUT is not required when the DEMIL IC is “6.”
Electro-static Discharge Susceptible:ANo known Electrostatic Discharge (ESD) or Electromagnetic Interference (EMI) sensitivity
Precious Metals Indicator Code:AItem does not contain precious metal
Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Automatic Data Processing Equipment:0Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9)
Category Code Description
No Freight Information