Product Details | BAND PASS FILTER

5915-01-022-4404 An item designed to pass frequencies within a specified range (band) and to suppress frequencies outside the range (band). Excludes a single inductance, or a single capacitance, or a single resistance. See COIL (as modified); REACTOR; CAPACITOR (as modified); and RESISTOR (as modified).

Part Alternates: 0800908003, 08-00908-003, 2286, 60Q5, 5915-01-022-4404, 01-022-4404, 5915010224404, 010224404

Electrical and Electronic Equipment Components | Filters and Networks

Supply Group (FSG) NSN Assign. NIIN
59 29 MAY 1976 01-022-4404

Drawings & Photos | NSN 5915-01-022-4404


Demand History | NSN 5915-01-022-4404

Part Number Request Date QTY Origin
5915-01-022-4404 2014-09-267 8 DIBBS
5915-01-022-4404 2014-06-159 41 DIBBS

Cross Reference | NSN 5915-01-022-4404

Part Number Cage Code Manufacturer
08-00908-003 00724 RAYTHEON COMPANY DBA RAYTHEON
2286 25120 PIEZO TECHNOLOGY, INC. DBA MTRONPTI
2286 DG438 SEMIC RF ELECTRONIC GMBH
60Q5 00136 VECTRON INTERNATIONAL, INC.

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 5915-01-022-4404

Technical Data | NSN 5915-01-022-4404

Characteristic Specifications
REFERENCE FREQUENCY PER FUNCTION 25.5 MEGAHERTZ BLANK
INSERTION LOSS AT REFERENCE FREQUENCY PER FUNCTION IN DECIBELS 3.0 BLANK
FREQUENCY BAND WIDTH PER FUNCTION 25.46 MEGAHERTZ BLANK AND 25.54 MEGAHERTZ BLANK
SOURCE IMPEDANCE RATING PER FUNCTION 4.0 KILOHMS BLANK
LOAD IMPEDANCE PER FUNCTION 4.0 KILOHMS BLANK
INCLOSURE TYPE ENCASED
FUNCTIONAL TERMINAL TYPE AND QUANTITY 1 PIN GROUND 1 PIN INPUT 1 PIN OUTPUT
STYLE DESIGNATOR 2 RECTANGULAR TERMINAL/TERMINALS ON ONE SURFACE
OVERALL HEIGHT 0.950 INCHES MINIMUM
BODY LENGTH 0.432 INCHES NOMINAL
BODY HEIGHT 0.450 INCHES MAXIMUM
BODY WIDTH 0.185 INCHES MAXIMUM
MOUNTING FACILITY TYPE AND QUANTITY 1 PLUG-IN
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH 0.192 INCHES NOMINAL
III SPECIFIED FREQUENCIES OF DISCRIMINATION PER FUNCTION 25.42 MEGAHERTZ BLANK AND 25.46 MEGAHERTZ BLANK AND 25.54 MEGAHERTZ BLANK AND 25.58 MEGAHERTZ BLANK
III DISCRIMINATION AT SPECIFIED FREQUENCIES PER FUNCTION IN DECIBELS 60.0 NOMINAL BLANK AND 3.0 NOMINAL BLANK AND 3.0 NOMINAL BLANK AND 60.0 NOMINAL BLANK
MANUFACTURERS CODE 00724
MFR SOURCE CONTROLLING REFERENCE 08-00908-003

Restrictions/Controls & Freight Information | NSN 5915-01-022-4404

Category Code Description
Shelf-Life Code:0Nondeteriorative
Hazardous Material Indicator CodePThere is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product
Demilitarization Code:ANon-Munitions List Item/ Non-Strategic List Item - Demilitarization not required.
Controlled Inventory Item Code:UUNCLASSIFIED
Precious Metals Indicator Code:AItem does not contain precious metal
Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Automatic Data Processing Equipment:0Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9)
Category Code Description
NMF Description 061990 ELECTRICAL EQUIP:FILTERS
Less than car load rating
Less than truck load rating P 77.5
Water commodity Code 593 unknown
Originating Activity Code HD Naval Inventory Control Point
Mechanicsburg, PA 17055-0788
Air Dimension Code A Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Air Commodity H Signal Corps supplies and equipment, including radio equipment and supplies, communications equipment and supplies, electrical equipment and supplies, etc.
Air Special Handling Z No special handling required.
Special Handling Code 9 unknonwn
HAZMAT
Type of Cargo Z No special type of cargo code applicable

Management | NSN 5915-01-022-4404

Category Code Description
Stores Account Code1Marine Corps Stock Fund Account Item.
Combat Essentiality Code5Critical Repair Part to a Combat Essential End Item. Those parts or components whose failure in a combat essential end item will render the end item inoperative or reduce its effectiveness below the minimum acceptable level of efficiency.
Materiel Management CodeBAll CommoditiesDefense Logistics Agency, (DLA,)
Echelon Management Code2ICP/DSSC Marine Corps-managed Recoverability Code D items and Defense Logistics Agency (DLA)/TACOM/GSA) items which the integrated manager has not decontrolled.
Source of SupplySMSDefense Logistics Agency
Enterprise Business Systems
AgencyDMU.S. Marine Corps
Service OrganizationMU.S. Marine Corps
ReparabilityZNonreparable item. When unserviceable, condemn and dispose at the level indicated by the first digit of the maintenance code.
Acquisition Advice CodesZINSURANCE/NUMERIC STOCKAGE OBJECTIVE ITEM # Items which may be required occasionally or intermittently, and prudence requires that a nominal quantity of materiel be stocked due to the essentiality or the lead time of the item. 1. The item is centrally managed, stocked, and issued. 2. Requisitions will be submitted in accordance with IMM/Service requisitioning procedures.
Controlled Item CodeUUNCLASSIFIED
Shelf Life Code0Nondeteriorative
Purchasing QTY
UOM
1
EA : Each
Category Code Description
Cognizance Codes9BNavy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Special Material IDVNElectrostatic Discharge - Sensitive
Special Material Content2 Electrostatic Discharge (ESD)/Electromagnetic (EM) Sensitive Item
Source of SupplySMSDefense Logistics Agency
Enterprise Business Systems
AgencyDNDepartment of the Navy
Service OrganizationNU.S. Navy
Acquisition Advice CodesZINSURANCE/NUMERIC STOCKAGE OBJECTIVE ITEM # Items which may be required occasionally or intermittently, and prudence requires that a nominal quantity of materiel be stocked due to the essentiality or the lead time of the item. 1. The item is centrally managed, stocked, and issued. 2. Requisitions will be submitted in accordance with IMM/Service requisitioning procedures.
Controlled Item CodeUUNCLASSIFIED
Shelf Life Code0Nondeteriorative
Purchasing QTY
UOM
1
EA : Each