NSN 5915-00-127-3102 4010171, 401017-1, 00-127-3102
Product Details | LOW PASS FILTER
5915-00-127-3102 An item designed to pass all frequencies below a specified frequency. Excludes a single inductance, a single capacitance, or a single resistance. See COIL (as modified); REACTOR; CAPACITOR (as modified); and RESISTOR (as modified).
Part Alternates: 4010171, 401017-1, 5915-00-127-3102, 00-127-3102, 5915001273102, 001273102
Electrical and Electronic Equipment Components | Filters and Networks
Supply Group (FSG) | NSN Assign. | NIIN | Item Name Code (INC) |
---|---|---|---|
59 | 06 JAN 1973 | 00-127-3102 | 13911 ( FILTER, LOW PASS ) |
Request a Quote
What Our Customers Say
Compare
NSNs for Compare ( up to 4 ): Add 5915-00-127-3102
Related Products | NSN 5915-00-127-3102
Technical Data | NSN 5915-00-127-3102
Characteristic | Specifications |
---|---|
OUTPUT TERMINAL IDENTIFICATION | UG21B/U |
FUNCTIONAL TERMINAL TYPE AND QUANTITY | 1 CONNECTOR, RECEPTACLE INPUT 1ST FUNCTION |
OPERATING TEMP RANGE | -10.0/+65.0 DEG CELSIUS |
OUTPUT IMPEDANCE PER FUNCTION W/SOURCE ACROSS INPUT | 50.0 OHMS BLANK |
FUNCTIONAL TERMINAL TYPE AND QUANTITY | 1 CONNECTOR, RECEPTACLE OUTPUT 2ND FUNCTION |
FREQUENCY BAND WIDTH PER FUNCTION | 1.00 HERTZ BLANK AND 3.00 GIGAHERTZ BLANK |
INPUT TERMINAL IDENTIFICATION | UG21B/U |
DISCRIMINATION AT SPECIFIED FREQUENCIES PER FUNCTION IN DECIBELS | 1.0 MAXIMUM BLANK AND 1.0 MAXIMUM BLANK AND 60.0 MINIMUM BLANK AND 60.0 MINIMUM BLANK |
BODY OUTSIDE DIAMETER | 0.812 INCHES NOMINAL |
INCLOSURE TYPE | ENCASED |
VOLTAGE STANDING WAVE RATIO PER FUNCTION | 1.25 BLANK |
INPUT TERMINAL MANUFACTURER CODE | 80058 |
SPECIFIED FREQUENCIES OF DISCRIMINATION PER FUNCTION | 1.00 HERTZ BLANK AND 3.00 GIGAHERTZ BLANK AND 4.50 GIGAHERTZ BLANK AND 15.00 GIGAHERTZ BLANK |
REFERENCE FREQUENCY PER FUNCTION | 1.5 GIGAHERTZ BLANK |
INPUT IMPEDANCE PER FUNCTION W/LOAD | 50.0 OHMS BLANK |
MOUNTING FACILITY TYPE AND QUANTITY | 1 CLAMP |
INSERTION LOSS AT REFERENCE FREQUENCY PER FUNCTION IN DECIBELS | 0.2 BLANK |
OUTPUT TERMINAL MANUFACTURER CODE | 80058 |
OVERALL LENGTH | 4.960 INCHES NOMINAL |
STYLE DESIGNATOR | ROUND TERMINAL/TERMINALS ON OPPOSITE SURFACES |
Restrictions/Controls & Freight Information | NSN 5915-00-127-3102
Category | Code | Description |
---|---|---|
Hazardous Material Indicator Code | P | There is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product |
Demilitarization Code: | A | Non-Munitions List Item/ Non-Strategic List Item - Demilitarization not required. |
Precious Metals Indicator Code: | U | Precious metal type is unknown |
Criticality Code: | X | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
Category | Code | Description |
---|---|---|
NMF Description | 061400 | CONDENSERS/PARTS NOI/CAPACITORS |
Less than car load rating | P | 77.5 |
Less than truck load rating | P | 77.5 |
Water commodity Code | 658 | unknown |
Originating Activity Code | TX | Defense Supply Center Columbus Columbus, OH 43218 |
Air Dimension Code | A | Shipment is not a consolidation and does not exceed 72 inches in any dimension. |
Air Commodity | H | Signal Corps supplies and equipment, including radio equipment and supplies, communications equipment and supplies, electrical equipment and supplies, etc. |
Air Special Handling | Z | No special handling required. |
Special Handling Code | 9 | unknonwn |
HAZMAT | ||
Type of Cargo | Z | No special type of cargo code applicable |