NSN 5910-01-576-4475 M39014/1-1553, M3901411553, MIL-PRF-39014/1
Product Details | CERAMIC DIELECTR FIXED CAPACITOR
5910-01-576-4475 A capacitor, whose capacitance value cannot be adjusted or varied, having a ceramic dielectric. It may be a single unit, or consist of two or more fixed units which cannot be separated.
Part Alternates: M39014/1-1553, M3901411553, MIL-PRF-39014/1, MILPRF390141, 5910-01-576-4475, 01-576-4475, 5910015764475, 015764475
Electrical and Electronic Equipment Components | Capacitors
Supply Group (FSG) | NSN Assign. | NIIN | Item Name Code (INC) |
---|---|---|---|
59 | 31 JUL 2009 | 01-576-4475 | 00007 ( CAPACITOR, FIXED, CERAMIC DIELECTRIC ) |
Demand History | NSN 5910-01-576-4475
Part Number | Request Date | QTY | Origin |
---|---|---|---|
5910-01-576-4475 | 2013-01-28 | 160 | United States |
Request a Quote
What Our Customers Say
Compare
NSNs for Compare ( up to 4 ): Add 5910-01-576-4475
Related Products | NSN 5910-01-576-4475
Technical Data | NSN 5910-01-576-4475
Characteristic | Specifications |
---|---|
RELIABILITY INDICATOR | ESTABLISHED |
BODY LENGTH | 0.190 INCHES NOMINAL |
NONDERATED OPERATING TEMP | -55.0 DEG CELSIUS MINIMUM AND 125.0 DEG CELSIUS MAXIMUM |
BODY HEIGHT | 0.090 NOMINAL INCHES |
CASE MATERIAL | CERAMIC |
NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION | 50.0 DC SINGLE SECTION |
TOLERANCE RANGE PER SECTION | -10.00/+10.00 PERCENT SINGLE SECTION |
CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH | 0.185 INCHES MINIMUM AND 0.215 INCHES MAXIMUM |
BODY STYLE | W/O MTG FACILITIES TERMINAL(S) ON ONE SURFACE |
TERMINAL TYPE AND QUANTITY | 2 UNINSULATED WIRE LEAD |
RELIABILITY FAILURE RATE LEVEL IN PERCENT | 0.010 |
TERMINAL LENGTH | 1.250 INCHES MINIMUM |
BODY WIDTH | 0.190 NOMINAL INCHES |
SCHEMATIC DIAGRAM DESIGNATOR | NO COMMON OR GROUNDED ELECTRODE(S) |
CAPACITANCE VALUE PER SECTION | 0.100 MILLIFARADS SINGLE SECTION |
TERMINAL DIAMETER | 0.025 INCHES NOMINAL |
Restrictions/Controls & Freight Information | NSN 5910-01-576-4475
Category | Code | Description |
---|---|---|
Hazardous Material Indicator Code | P | There is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product |
Demilitarization Code: | Q | Strategic List Item (SLI). Demilitarization not required. SLI are non-MLI(Munitions List Items) controlled by the U.S. Dept. of Commerce through the Export Administration Regulations (EAR) and indicated on the Commerce Control List (CCL). Each CCL entry is preceded by a four-digit Export Control Commerce Control List Item (CCLI) – MUT to the point of scrap required outside the United States. Inside the United States, MUT is required when the DEMIL integrity code (IC) is “3” and MUT is not required when the DEMIL IC is “6.” |
Electro-static Discharge Susceptible: | A | No known Electrostatic Discharge (ESD) or Electromagnetic Interference (EMI) sensitivity |
Precious Metals Indicator Code: | A | Item does not contain precious metal |
Criticality Code: | X | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
Automatic Data Processing Equipment: | 0 | Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9) |
Category | Code | Description |
---|---|---|
No Freight Information |