NSN 5910-01-298-7879 01-298-7879, 012987879
Product Details | CERAMIC DIELECTRIC FIXED CAPACITOR
5910-01-298-7879 A capacitor, whose capacitance value cannot be adjusted or varied, having a ceramic dielectric. It may be a single unit, or consist of two or more fixed units which cannot be separated.
Part Alternates: 5910-01-298-7879, 01-298-7879, 5910012987879, 012987879
Electrical and Electronic Equipment Components | Capacitors
Supply Group (FSG) | NSN Assign. | NIIN | Item Name Code (INC) |
---|---|---|---|
59 | 01-298-7879 | 00007 ( CAPACITOR, FIXED, CERAMIC DIELECTRIC ) |
Request a Quote
What Our Customers Say
Compare
NSNs for Compare ( up to 4 ): Add 5910-01-298-7879
Related Products | NSN 5910-01-298-7879
Technical Data | NSN 5910-01-298-7879
Characteristic | Specifications |
---|---|
CAPACITANCE VALUE PER SECTION | 0.270 MICROFARADS SINGLE SECTION |
TOLERANCE RANGE PER SECTION | -10.00 TO 10.00 PERCENT SINGLE SECTION |
NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION | 100.0 DC SINGLE SECTION |
NONDERATED OPERATING TEMP | -55.0 DEG CELSIUS MINIMUM AND 150.0 DEG CELSIUS MAXIMUM |
BODY STYLE | 27A W/O MTG FACILITIES TERMINAL(S) ON ONE SURFACE |
BODY LENGTH | 0.300 INCHES MAXIMUM |
BODY WIDTH | 0.300 INCHES MAXIMUM |
BODY HEIGHT | 0.150 INCHES MAXIMUM |
SCHEMATIC DIAGRAM DESIGNATOR | 1C NO COMMON OR GROUNDED ELECTRODE(S) |
TERMINAL TYPE AND QUANTITY | 2 UNINSULATED WIRE LEAD |
TERMINAL LENGTH | 1.250 INCHES MINIMUM |
TERMINAL DIAMETER | 0.025 INCHES NOMINAL |
CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH | 0.185 INCHES MINIMUM AND 0.215 INCHES MAXIMUM |
CASE MATERIAL | PLASTIC |
INSULATION RESISTANCE AT REFERENCE TEMP | 1000.0 MEGOHM-MICROFARADS |
RELIABILITY INDICATOR | NOT ESTABLISHED |
III TERMINAL SURFACE TREATMENT | SOLDER |
(NON-CORE DATA) OVERALL LENGTH | 0.300 INCHES MAXIMUM |
(NON-CORE DATA) OVERALL HEIGHT | 0.150 INCHES MAXIMUM |
(NON-CORE DATA) OVERALL WIDTH | 0.300 INCHES MAXIMUM |
Restrictions/Controls & Freight Information | NSN 5910-01-298-7879
Category | Code | Description |
---|---|---|
Hazardous Material Indicator Code | P | There is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product |
Category | Code | Description |
---|---|---|
No Freight Information |