Product Details | CERAMIC DIELECTRIC FIXED CAPACITOR

5910-01-292-9315 A capacitor, whose capacitance value cannot be adjusted or varied, having a ceramic dielectric. It may be a single unit, or consist of two or more fixed units which cannot be separated.

Part Alternates: CDR13BP471CJMP, MILC556814, MIL-C-55681-4, 5910-01-292-9315, 01-292-9315, 5910012929315, 012929315

Electrical and Electronic Equipment Components | Capacitors

Supply Group (FSG) NSN Assign. NIIN
59 24 JAN 1989 01-292-9315

Drawings & Photos | NSN 5910-01-292-9315


Cross Reference | NSN 5910-01-292-9315

Part Number Cage Code Manufacturer
CDR13BP471CJMP 81349 MILITARY SPECIFICATIONS PROMULGATED BY MILITARY
MIL-C-55681-4 81349 MILITARY SPECIFICATIONS PROMULGATED BY MILITARY

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 5910-01-292-9315

Technical Data | NSN 5910-01-292-9315

Characteristic Specifications
CAPACITANCE VALUE PER SECTION 471.000 PICOFARADS SINGLE SECTION
TOLERANCE RANGE PER SECTION -5.00 TO 5.00 PICOFARADS SINGLE SECTION
NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION 200.0 DC SINGLE SECTION
TEMP COEFFICIENT OF CAPACITANCE PER SECTION IN PPM PER DEG CELSIUS 0.0 SINGLE SECTION
TOLERANCE OF TEMP COEFFICIENT PER SECTION IN PPM PER DEG CELSIUS -30.0 TO 30.0 SINGLE SECTION
NONDERATED OPERATING TEMP -55.0 DEG CELSIUS MINIMUM AND 125.0 DEG CELSIUS MAXIMUM
BODY STYLE 45A CHIP TYPE
BODY LENGTH 0.090 INCHES MINIMUM AND 0.130 INCHES MAXIMUM
BODY WIDTH 0.110 INCHES NOMINAL
BODY HEIGHT 0.058 INCHES MINIMUM AND 0.102 INCHES MAXIMUM
SCHEMATIC DIAGRAM DESIGNATOR 1C NO COMMON OR GROUNDED ELECTRODE(S)
TERMINAL TYPE AND QUANTITY 2 BONDING PAD
TERMINAL LENGTH 0.015 INCHES NOMINAL
CASE MATERIAL CERAMIC OR GLASS
INSULATION RESISTANCE AT REFERENCE TEMP 1000000.0 MEGOHMS
DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT 0.150
RELIABILITY INDICATOR ESTABLISHED
RELIABILITY FAILURE RATE LEVEL IN PERCENT 0.100
TEST DATA DOCUMENT 81349-MIL-C-55681 SPECIFICATION
SPECIFICATION/STANDARD DATA 81349-MIL-C-55681-4 GOVERNMENT SPECIFICATION
III TERMINAL SURFACE TREATMENT PALLADIUM OR SILVER
(NON-CORE DATA) OVERALL LENGTH 0.085 INCHES MINIMUM AND 0.135 INCHES MAXIMUM
III INSULATION RESISTANCE AT MAXIMUM OPERATING TEMP 1000000.0 MEGOHMS
(NON-CORE DATA) OVERALL HEIGHT 0.068 INCHES MINIMUM AND 0.102 INCHES MAXIMUM
(NON-CORE DATA) OVERALL WIDTH 0.110 INCHES NOMINAL
MANUFACTURERS CODE 81349
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE CDR13BP471CJMP
MANUFACTURERS CODE 81349
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE MIL-C-55681-4

Restrictions/Controls & Freight Information | NSN 5910-01-292-9315

Category Code Description
Shelf-Life Code:0Nondeteriorative
Hazardous Material Indicator CodePThere is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product
Demilitarization Code:BMunitions List Item - Mutilation (MUT) to the point of scrap required. (Formerly: Demilitarization not required. Trade Security Controls (TSCs) required at disposition.)
Controlled Inventory Item Code:UUNCLASSIFIED
Precious Metals Indicator Code:PItem contains platinum family metals
Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Category Code Description
No Freight Information