NSN 5910-01-171-8318 01-171-8318, 011718318
Product Details | CERAMIC DIELECTRIC FIXED CAPACITOR
5910-01-171-8318 A capacitor, whose capacitance value cannot be adjusted or varied, having a ceramic dielectric. It may be a single unit, or consist of two or more fixed units which cannot be separated.
Part Alternates: 5910-01-171-8318, 01-171-8318, 5910011718318, 011718318
Electrical and Electronic Equipment Components | Capacitors
Supply Group (FSG) | NSN Assign. | NIIN | Item Name Code (INC) |
---|---|---|---|
59 | 01-171-8318 | 00007 ( CAPACITOR, FIXED, CERAMIC DIELECTRIC ) |
Cross Reference | NSN 5910-01-171-8318
Part Number | Cage Code | Manufacturer |
---|---|---|
C052C111F2G1CA | 05397 | UNION CARBIDE CORP MATERIALS SYSTEMS DIV |
CCR05CG111FR | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY |
CCR05CG111FS | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY |
MIL-C-20/35 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY |
RPE110-111C0G111F100 | 18796 | MURATA ERIE NORTH AMERICA INC STATE COLLEGE OPNS |
Request a Quote
What Our Customers Say
Compare
NSNs for Compare ( up to 4 ): Add 5910-01-171-8318
Related Products | NSN 5910-01-171-8318
Technical Data | NSN 5910-01-171-8318
Characteristic | Specifications |
---|---|
CAPACITANCE VALUE PER SECTION | 110.000 PICOFARADS SINGLE SECTION |
TOLERANCE RANGE PER SECTION | -1.00 TO 1.00 PERCENT SINGLE SECTION |
NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION | 200.0 DC SINGLE SECTION |
TEMP COEFFICIENT OF CAPACITANCE PER SECTION IN PPM PER DEG CELSIUS | 0.0 SINGLE SECTION |
TOLERANCE OF TEMP COEFFICIENT PER SECTION IN PPM PER DEG CELSIUS | -30.0 TO 30.0 SINGLE SECTION |
NONDERATED OPERATING TEMP | -55.0 DEG CELSIUS MINIMUM AND 125.0 DEG CELSIUS MAXIMUM |
BODY STYLE | 27A W/O MTG FACILITIES TERMINAL(S) ON ONE SURFACE |
BODY LENGTH | 0.190 INCHES NOMINAL |
BODY WIDTH | 0.190 INCHES NOMINAL |
BODY HEIGHT | 0.090 INCHES NOMINAL |
SCHEMATIC DIAGRAM DESIGNATOR | 1C NO COMMON OR GROUNDED ELECTRODE(S) |
TERMINAL TYPE AND QUANTITY | 2 UNINSULATED WIRE LEAD |
TERMINAL LENGTH | 1.125 INCHES MINIMUM |
TERMINAL DIAMETER | 0.020 INCHES MINIMUM AND 0.027 INCHES MAXIMUM |
CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH | 0.200 INCHES NOMINAL |
CASE MATERIAL | PLASTIC |
INSULATION RESISTANCE AT REFERENCE TEMP | 100000.0 MEGOHMS |
DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT | 0.1500 |
RELIABILITY INDICATOR | ESTABLISHED |
RELIABILITY FAILURE RATE LEVEL IN PERCENT | 0.0100 |
TEST DATA DOCUMENT | 81349-MIL-C-20 SPECIFICATION |
SPECIFICATION/STANDARD DATA | 81349-MIL-C-20/35 GOVERNMENT SPECIFICATION |
III TERMINAL SURFACE TREATMENT | SOLDER |
(NON-CORE DATA) OVERALL LENGTH | 0.190 INCHES NOMINAL |
III INSULATION RESISTANCE AT MAXIMUM OPERATING TEMP | 10000.0 MEGOHMS |
(NON-CORE DATA) OVERALL HEIGHT | 0.190 INCHES NOMINAL |
(NON-CORE DATA) OVERALL WIDTH | 0.245 INCHES MAXIMUM |
MANUFACTURERS CODE | 81349 |
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | CCR05CG111FR |
MANUFACTURERS CODE | 81349 |
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | MIL-C-20/35 |
Restrictions/Controls & Freight Information | NSN 5910-01-171-8318
Category | Code | Description |
---|---|---|
Hazardous Material Indicator Code | P | There is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product |
Category | Code | Description |
---|---|---|
No Freight Information |